@All,I use IP35 Pro+E2160+500GB Cavier SE SATA(Boot) and Segate 7200.7 160GB SATA.It will post but it will stuck at the black screen before window and won't load os.Is there any known issue on this combo?No raid and using offical bios 17.
@All,I use IP35 Pro+E2160+500GB Cavier SE SATA(Boot) and Segate 7200.7 160GB SATA.It will post but it will stuck at the black screen before window and won't load os.Is there any known issue on this combo?No raid and using offical bios 17.
Intel E8600 E0@420x10(H20)/Abit IP35 Pro/Team Xtreem DDR 2 1066mhz D9GKX@420mhz,5-4-4-11-2T /Crucial Ballistx Tracer DDR 2 800mhz 16FD3@420mhz 5-4-4-11-2T/Gigabyte GTX260 SOC@720/1512/1300/LG SATA DVD-RW/WD 320GB +Segate 1TB/Corsair HX520W/Enlight Lian Li OEM PC7A casew/W65A Side panel
Liquid cool: Dtek Fuzion V2,Swiftech MCR220,Swiftech Radbox,Swiftech Micro res,Nirox P2800 modded pump,Generic 1/2" ID tubing,3xYate Loon mid speed
Note:E8500 is 9.5x but cpuz got issue and X2 4600+ is oc with stock cooler,max validation and never push
9.204's PI
BIOSTAR TPOWER I45 UNOFFICIAL THREAD
BIOSTAR TPOWER BOLT MOD FOR HEATPIPE AND HEATSINK
BIOSTAR TPOWER I45 BIOS FLASHING PROCEDURE
ABIT IP35 PRO HEATPIPE MOD
ABIT IP35 PRO BIOS FLASHING PROCEDURE
IP35 Pro: 9650@4000Mhz, par overclocker; Freezone Elite; 4Gb GSkill DDR-800@DDR-1068 (2 x 2gb); XFX 8800 GTS; Areca 8X PCIe in Raid 0 working at 4x speed; 4-250 Gb (single platter) 7200.10 drives; Giga 3DAurora case with side window.
Posting for a friend..
Hes running BIOS 17 on the IP35 Pro, and hes not able to boot with the E8600. It boots once or twice, erratically.
The error hes getting "8.7." which is CPU Voltage Error.
What should he do?
CPU : E8400
Motherboard : Abit IP-35 Pro
Memory : GSkill DDR2-800 2GBHZ @ 1:1 445 4-4-4-12
Graphics Card : Palit HD4870 Dual Sonic
Display : Dell E228WFP
Storage & OS : 1TB | Windows 7 64bit
Sound Card & Speakers/Headphones : X-Fi Platinum (HotRod) > Zero DAC > BeyerDynamic DT990 Pro
Peripherals : Razer ProType Keyboard | Steelseries Ikari Optical | Razer Goliathus Speed.
Case : Coolermaster ATCS 840
PSU : OCZ GamerXtreme 700W
Did you try resetting the CMOS with the power disconnected for about 5min?
Then when you startup go to BIOS and set a voltage over what your CPU requires. For example, try setting it to 1.4v in bios and then set your memory voltages etc all to the correct level as required. Then turn off speed step and C1E in the BIOS as well. That will lock the voltage in for the CPU. See if it's stable. I'm not entirely confident in a board regulating the CPU voltage automatically.
Asus Maximus V Gene
3570k @ 4.6Ghz +.13v w/Noctua NH-D14
8GB Samsung 30nm @ DDR3-2133 10-10-10-25 1.4v
EVGA GTX 670 FTW @ 1170/6800
2x Crucial M4 128GB SSD
WD Velociraptor 300GB
Corsair HX1000 PSU
Cooler Master HAF 932
has anyone worked with the Rebels haven 17 Beta Bios? Can someone tell me what the PL levels actually do? Im having one heck of a time getting 4x1gb stable @DDR2 934 (4-4-4-12), I could use some advice on memory settings to change to help get this stable, Im running my CPU and RAM 1:1...mch=1.48, Vdimm=2.27
2600K 3109C384
Modded Corsair H50
ASUS P8P67 WS Revolution
2x2GB Super Talent 2000
Evga GTX 480
Corsair 850 HX
CM Storm Sniper black ed.
Samsung F3 1TB
Windows 7 64
Does the Ip35-Pro have an issue with the E8600? I've seen a couple reports of the chips not running with this board. I notice that Abit doesn't list them as compatible.
I was thinking of buying an E8600 and running it at an easy 4Ghz. Now I'm not so sure that it'll work properly. Should I get an E8500 instead?
Asus Maximus V Gene
3570k @ 4.6Ghz +.13v w/Noctua NH-D14
8GB Samsung 30nm @ DDR3-2133 10-10-10-25 1.4v
EVGA GTX 670 FTW @ 1170/6800
2x Crucial M4 128GB SSD
WD Velociraptor 300GB
Corsair HX1000 PSU
Cooler Master HAF 932
I just had a question for the masses in here. I currently own a IP35-Pro myself, but with Abit leaving the game, which companies are some of you looking to jump ship to?
I'm thinking of DFI, but Biostar is coming out with some good things as well.
Zero System Black
Mobo: eVGA x58 SLI Micro
CPU: Core i7 920 D0 #3943 @4.0Ghz
Heatsink: Dark Knight Edition from Xiga (Waiting on ND-14)
RAM: Corsair C8D 9-9-9-24 1.65v
Video: XFX 5870 1GB 1000/1300
PSU: OCZ GamerXtreme 700W
Sound: Creative X-Fi Platinum w/ Z-5500's
Display:Samsung T260HD
Key: Saitek Eclipse
Mouse: Logitech G9x
Case: Corsair 800D
O/S: Win7 Ultimate x64
I went to an ASUS P5Q-Deluxe for my P45. Nice board. Still like my IP35 Pro a lot though.
BIOSTAR TPOWER I45 UNOFFICIAL THREAD
BIOSTAR TPOWER BOLT MOD FOR HEATPIPE AND HEATSINK
BIOSTAR TPOWER I45 BIOS FLASHING PROCEDURE
ABIT IP35 PRO HEATPIPE MOD
ABIT IP35 PRO BIOS FLASHING PROCEDURE
IP35 Pro: 9650@4000Mhz, par overclocker; Freezone Elite; 4Gb GSkill DDR-800@DDR-1068 (2 x 2gb); XFX 8800 GTS; Areca 8X PCIe in Raid 0 working at 4x speed; 4-250 Gb (single platter) 7200.10 drives; Giga 3DAurora case with side window.
dx58so
w3520@4100
4x1gb corsair ddr3-1333
gtx 295
TR ultra-x, 2 scythe ultrakaze push/pull
xclio stablepower 1000
vista ultimate
[SIGPIC][/SIGPIC]
-------------------------------
would you crunch if you thought it would save her life?
maybe it will!
That's a shame; I really like DFI's products.
I am still not too sure what happened between them and AngryGames (proprietor of the former 'DFI-Street' website). If it was a shady situation up and they screwed him over...that would make me stay away from DFI (simply on principal).
Do you have any info on what happened? I heard it was something about DFI not wanting him to post some sort of 'hack' on the site...
Have you messed around with the DFI I45 board at all? I was thinking of grabbing one and willing my IP35 Pro system to my sister (needs a new system).
abit IP35 Pro (Snake) | Core 2 Duo E6420 @ 3.4GHz (425FSB x 8 - should I push it further?!) | Thermalright XP-90C w/ Panaflow 92mm | 2GB Kingston Hyper-X DDR2-800 | OCZ GeForce 8800GTX | Audigy 2zs Platinum | 150GB Raptor X, 500GB Seagate 7200.10 | CoolerMaster CM Stacker | CoolerMaster iGreen 600w
My Heatware
I think my next board whenever I do a complete system overhaul will be Asus. Always had good luck with their products and good overclockers as well.
Anyone know if Abit will update the BIOS one more time for the E8600 to function correctly?
Asus Maximus V Gene
3570k @ 4.6Ghz +.13v w/Noctua NH-D14
8GB Samsung 30nm @ DDR3-2133 10-10-10-25 1.4v
EVGA GTX 670 FTW @ 1170/6800
2x Crucial M4 128GB SSD
WD Velociraptor 300GB
Corsair HX1000 PSU
Cooler Master HAF 932
BIOSTAR TPOWER I45 UNOFFICIAL THREAD
BIOSTAR TPOWER BOLT MOD FOR HEATPIPE AND HEATSINK
BIOSTAR TPOWER I45 BIOS FLASHING PROCEDURE
ABIT IP35 PRO HEATPIPE MOD
ABIT IP35 PRO BIOS FLASHING PROCEDURE
IP35 Pro: 9650@4000Mhz, par overclocker; Freezone Elite; 4Gb GSkill DDR-800@DDR-1068 (2 x 2gb); XFX 8800 GTS; Areca 8X PCIe in Raid 0 working at 4x speed; 4-250 Gb (single platter) 7200.10 drives; Giga 3DAurora case with side window.
If you're into gaming, the PCIe v2.0 is a pretty decent reason to move to a P45 board. High-end GPUs (9800GX2, GTX 2x0, HD4870 X2, etc) are flooding the PCIe v1.1 x16 bus, so we're actually needing the extra bandwidth provided by PCIe v2.0.
Aside from that, P45's should clock better, produce less heat, use less energy, and have better memory controllers.
Eller
Desktop: Q6600 G0 @ 3.6 Ghz | P5E | 2x2 Gb G.Skill PC8000 | GTX 560 Ti | CM690 | TT TP 750 watt | Win 7 Pro x64 | Water Cooling
Server: i3 530 (Stock) | CM Vortex Low-Profile | Zotac H55-ITX WIFI | 2x2Gb Corsair 1333Mhz | IGP | VX450 | Server 2008 R2 x64
Well I have a 4870 X2. But my benchmarks seem to be in line to similar systems with P45 chipsets, so I'm not sure if I'm convinced the PCIe 2.0 will do much. But as mentioned my IP35 has been acting weird lately, so I will probably get a new board anyway. I'll look forward to having something new to play with. I know this is a bit OT, but any recommandations? I sort of eyed out the Biostar board, but then I read it wasn't all that great for quads. I'm not sure if I want to fork out for a DDR3 board just yet, with Nehalem right around the corner and all, so...
- Intel Xeon W3520 #3848A352 D0 @ 4.4GHz
- DFI LanParty UT X58-T3eH8 (bios 05/08)
- 3x2GB Corsair Failinator GT 1866MHz 7-8-7-20 (3x2GB Patriot Viper 1600MHz C8 backup...)
- Sapphire Radeon HD 4870 X2 2GB @ 872/1000
- ~5TB assorted WD/Seagate
- SB X-Fi XtremeMusic & Logitech Z-680 THX
- Tt Toughpower 1200W Modular
- CM Stacker T01 Black
- Eizo FlexScan SX2761W 27" & Samsung 226CW 22"
CPU Loop: MCP655/D5 - Swiftech Apogee GTZ - Thermochilll PA120.3 - YateLoon SL's - 1/2" MasterKleer
GPU/Chipset Loop: MCP655/D5 - EK-FC4870 X2 Acetal CF - Swiftech MCW30 - Thermochill PA120.3 - YateLoon SL's - 1/2" MasterKleer
TBH, I don't think it's OT to much. I mean look, we all realize that Abit is out of the game very soon so some of us need some sort of direction. IP35-Pro was my last & my KX7R was my first...I just want to go to a company that is at least half of what Abit was to me.
As I got a GTX260; think it's time to update, but with a new cpu on the horizon, not sure blowing $200+ is in order.
Zero System Black
Mobo: eVGA x58 SLI Micro
CPU: Core i7 920 D0 #3943 @4.0Ghz
Heatsink: Dark Knight Edition from Xiga (Waiting on ND-14)
RAM: Corsair C8D 9-9-9-24 1.65v
Video: XFX 5870 1GB 1000/1300
PSU: OCZ GamerXtreme 700W
Sound: Creative X-Fi Platinum w/ Z-5500's
Display:Samsung T260HD
Key: Saitek Eclipse
Mouse: Logitech G9x
Case: Corsair 800D
O/S: Win7 Ultimate x64
I doubt that the 4870x2 could saturate the PCI-E 1.1 bus. Looks like your results prove it, so I wouldn't see any need to get a P45 board unless your IP-35 stops working.
2600k @ 4.6 GHz
Noctua NH-D14 cooler
P8Z68-V PRO
16 GB RAM
Corsair TX-850
Two Gigabyte 670 GTX Windforce's in SLI at +60 core/+400 memory (3DMark11 15000P)
Antec P182
Crucial M4 SSD
Win7 x64
Dell 3007WFP-HC
Logitech G15 Keyboard & G7 Mouse
ErgoHuman Chair
you don't get it...we have to come up with excuses in order to convince the mind a new board is needed!
BIOSTAR TPOWER I45 UNOFFICIAL THREAD
BIOSTAR TPOWER BOLT MOD FOR HEATPIPE AND HEATSINK
BIOSTAR TPOWER I45 BIOS FLASHING PROCEDURE
ABIT IP35 PRO HEATPIPE MOD
ABIT IP35 PRO BIOS FLASHING PROCEDURE
IP35 Pro: 9650@4000Mhz, par overclocker; Freezone Elite; 4Gb GSkill DDR-800@DDR-1068 (2 x 2gb); XFX 8800 GTS; Areca 8X PCIe in Raid 0 working at 4x speed; 4-250 Gb (single platter) 7200.10 drives; Giga 3DAurora case with side window.
Haha Ace-a-Rue, you're very much right there. I've been trying to come up with new reasons to get a new motherboard for a couple of days now!
I've been extremely pleased with my Abit board until now, when I got back to my computer after 3 months. Since then it's been acting extremely flakey, and nothing really seems to improve it. Things only got worse when I put in the new 4870 X2. I guess it's just time for fresh blood, and I don't really mind it. So anyway, I've eyed out the Asus P5Q Deluxe. This should be a good board for my needs, no?
- Intel Xeon W3520 #3848A352 D0 @ 4.4GHz
- DFI LanParty UT X58-T3eH8 (bios 05/08)
- 3x2GB Corsair Failinator GT 1866MHz 7-8-7-20 (3x2GB Patriot Viper 1600MHz C8 backup...)
- Sapphire Radeon HD 4870 X2 2GB @ 872/1000
- ~5TB assorted WD/Seagate
- SB X-Fi XtremeMusic & Logitech Z-680 THX
- Tt Toughpower 1200W Modular
- CM Stacker T01 Black
- Eizo FlexScan SX2761W 27" & Samsung 226CW 22"
CPU Loop: MCP655/D5 - Swiftech Apogee GTZ - Thermochilll PA120.3 - YateLoon SL's - 1/2" MasterKleer
GPU/Chipset Loop: MCP655/D5 - EK-FC4870 X2 Acetal CF - Swiftech MCW30 - Thermochill PA120.3 - YateLoon SL's - 1/2" MasterKleer
i am sure it is the PCIe 2.0 card trying to live within PCIe 1.1 specs and probably the bios code is deficent to properly handle that VC...so...don't expect abit to rectify that situation.
good luck with your new motherboard.
BIOSTAR TPOWER I45 UNOFFICIAL THREAD
BIOSTAR TPOWER BOLT MOD FOR HEATPIPE AND HEATSINK
BIOSTAR TPOWER I45 BIOS FLASHING PROCEDURE
ABIT IP35 PRO HEATPIPE MOD
ABIT IP35 PRO BIOS FLASHING PROCEDURE
IP35 Pro: 9650@4000Mhz, par overclocker; Freezone Elite; 4Gb GSkill DDR-800@DDR-1068 (2 x 2gb); XFX 8800 GTS; Areca 8X PCIe in Raid 0 working at 4x speed; 4-250 Gb (single platter) 7200.10 drives; Giga 3DAurora case with side window.
Ace and all, what's your opinion on Bios 17, are you using it? or should I stick with the 16 final? I have an e8400.
Thanks! :-)
i went with 17 to totally unlock my QX9650...16 did not allow me to raise the multi above default even though i am not using 10 or above...it was just i didn't like NOT having the option to go up...other than that, probably not a big difference between the two.
BIOSTAR TPOWER I45 UNOFFICIAL THREAD
BIOSTAR TPOWER BOLT MOD FOR HEATPIPE AND HEATSINK
BIOSTAR TPOWER I45 BIOS FLASHING PROCEDURE
ABIT IP35 PRO HEATPIPE MOD
ABIT IP35 PRO BIOS FLASHING PROCEDURE
IP35 Pro: 9650@4000Mhz, par overclocker; Freezone Elite; 4Gb GSkill DDR-800@DDR-1068 (2 x 2gb); XFX 8800 GTS; Areca 8X PCIe in Raid 0 working at 4x speed; 4-250 Gb (single platter) 7200.10 drives; Giga 3DAurora case with side window.
Awesome, thanks for the quick reply. I just wanted to make sure it was somewhat stable before I tried it. I still have that issue that when I clear CMOS it's hit or miss when I go to save bios settings... I get that false turn on / turn off thing a lot of the time. Once I get a good save, then I'm usually ok. It's the one thing that's always bothered me about this board, otherwise it's great.
i never had the save problem...it saves without powering down except for a CAS change or Command Rate change...i think those require it to shutdown, but not sure since i leave those alone, meaning i set CAS=5 and CR=2 and never touch them again.
BIOSTAR TPOWER I45 UNOFFICIAL THREAD
BIOSTAR TPOWER BOLT MOD FOR HEATPIPE AND HEATSINK
BIOSTAR TPOWER I45 BIOS FLASHING PROCEDURE
ABIT IP35 PRO HEATPIPE MOD
ABIT IP35 PRO BIOS FLASHING PROCEDURE
IP35 Pro: 9650@4000Mhz, par overclocker; Freezone Elite; 4Gb GSkill DDR-800@DDR-1068 (2 x 2gb); XFX 8800 GTS; Areca 8X PCIe in Raid 0 working at 4x speed; 4-250 Gb (single platter) 7200.10 drives; Giga 3DAurora case with side window.
Bookmarks