Are those mods work for P5K PRO aswell? Specially Vcore and Vdroop? No need for PLL/Mem etc.
Are those mods work for P5K PRO aswell? Specially Vcore and Vdroop? No need for PLL/Mem etc.
Thank you guys for all this information , very helpfull, question can i use a
10k vr cermet 15 turn instead of 50k ? since i live in a small island on the caribbean trimmer pots are very rare and hard to find , i got some 500k and 10k vr like 5 of each, is it possible to work something out for Vcore with any of those vr ? i only need vcore mod. Any help and guidance will be greatly appreciated.
chispy.
Bump... Anyone willing to help me or give me some advice and guidance ?
I don't think, that you can use the Mods for the P5K Pro, but here you can find a V.Core Mod...
Hi,
I got a P5K-E wi/fi mobo and I want to do the vcore mod and maybe vmch mod(runing out of multiturn trimmers ) but i want to see how much vcore voltage do I curently have.
bios set 1.700V
CPU-Z I got 1.632 I know there is a vdrop
but where can i mesure with a multimeter?
Sure, here it is...
Dows anyone can tell me the voltage-readpoints of the P5K Pro motherboard...?
IS it posible to get more then 1.5V on FSB Termination?
ASUS Destroyer
Where can I measure vcore with multimeter?
Hi!
Somebody can help me in P5K Premium Vdrop mod? How let me do it?
THX!
Just a heads up to those inquiring about vDroop. I know I posted somewhere on back in this thread about my solution.
I did the pencil mod, only to see a minor change in my vdroop. I did some reading, and found that people were commenting on wild vdroop after updating to a BIOS after 0602. I found and installed the older 0602 bios on my mobo. Vdroop has been minuscule ever since.
System: Core I7 920 @ 4200MHz 1.45vCORE 1.35VTT 1.2vIOH // EVGA x58 Classified E760 // 6GB Dominator GT 1866 @ 1688 6-7-6-18 1T 1.65V // Intel X25 80GB // PCP&C 750W Silencer
Cooling: Heatkiller 3.0 LT CPU block // 655 Pump // GTX360 Radiator
Sound: X-FI Titanium HD --> Marantz 2265 --> JBL 4311WXA's
Display: GTX480 // Sony GDM-FW900
Q6600 G0 L740B126 Lapped, 2x1Gb Kingston HyperX DDR2-1200
Gigabyte 8800 GTS 512Mb OC 756-1890-1000
TT Toughpower 750 W (W0116) new 8xPCI-E Rev.
Western Digital Caviar SE16 WD6400 AAKS rocks
WC: Swiftech H2O-Apex Ultra 220 GT + PA120.3 5v
OCZ XTC RAM Cooler, HR-05 IFX + 80mm FAN (NB), 2x HR-09U type 2 (mosfets), Modded Zalman ZM NB-47J (SB), Arctic-Cooling MX-2
Vista 32 bits
------------
- ASUS P5K Premium bios 0612: (3.84GHz 8x480) @1.432v
------------
- P5B Deluxe: 3.60GHz (9x400) @1.33v *** Old Setup (P5B deluxe)
OCCT 2.x Final Download
It's amazing - a good board that does not have much info in net. No read points, no vmods....
Ahem, I just did the pencil mod for the vdrop and after that I had no power to my mobo. The light did not come on, nothing. I definitely grayed in the right thingo'. I made sure of that. I rubbed it off and after a few shots I have power again. Should I set everything in the bios back to default first?
Lapped E8400 Lapped IFX-14 | ASUS P5K-E | Crucial 2 x 2gb PC2-5300 D9's | Gigabyte 8800GTX HR-03 plus | Too many hdd's to mention |Fatal1ty Extreme Gamer | G15 @ MX518 | AV Labs Dolby 7.1 | Antec NEO HE550 | 24" Dell 2407 LCD
Is there anyone here that can answer some questions about this mod?
I went to this thread to find info on this board. It's a good thread except that the read points are vague. So I sorted this out. The lead points are at these points I've circled in red for vcore read. The best way to solder to them is from the back of the board. I will post another picture later when I don't have the board setup. A good ground point is at the mb fastening point. Like where you screw the mb to your case. That's really a good ground point for any mod you do. If you're doing the hard mod there is no sense of doing the pencil mod. I know it's old hardware but it just so happens I'm benching old hardware. lol
Bookmarks