My E6850 results On Air

[michaLcoughliN]

Strap ; auto
fsb frequency ; 425
pci frequenecy ; 101
dram frequenecy ; 850 (1:1)
command rate ; 2T
timing control ' manual 5:5:5:15
AUTO
AUTO
AUTO
AUTO

cpu + pcie spread spectrum ; disabled
cpu voltage ; 1.5vcore
voltage reference ; auto
damper ; auto
PLL voltage ; 2.1
Dram votlage ; 2.2
termination ; 1.5
nb voltage ; 1.8
nb reference ; auto
sb voltage ; 1.2

CPU ratio ; Manual
cmos ; 9
DISABLED
DISABLED
ENABLED
DISABLED
ENABLEd
ENABLED

3.8ghz on air with 1.5vcore giving me 40c Idle and 55c Load.

[Aldy402]

nice what hsf u using?
do you have "PECI" enabled in the bios?

[Supertim0r]

that's really good
what's the stepping ?

[michaLcoughliN]

Im using Zalman 9700 HSF..

Stepping : B

[Arcygenical]

Im using Zalman 9700 HSF..

Stepping : B

I think he meant which core revision? no? G0...

[michaLcoughliN]

its g0 of course =]

And at stock setting it was idling at 20c

[Noob-ftw]

Where in Burlington did you get it? I live relatively near there, so I might get a G0.

[michaLcoughliN]

I order all my parts online through www.ncix.com .

[georgesod]

Max fsb please

[michaLcoughliN]

right now its 425 fsb im testnig stablility right now. its been 1 hour orthos Larrge FTTS.

Im gonna see how far i can go on 1.5vcore. I doubt that much higher. But definatly will try 4ghz. @ 1.5

[georgesod]

Try with 6 or 7 if you got the time

[Supertim0r]

I meant the cpu step wrote on the ihs/box (ex : L720A123 ?)

[luihed]

Nice overclock dude, glad you finally got your machine together.....

Max fsb please

Mine was L722 and it did 550fsb on water....

[scwam]

I got an L719b batch doing 3.9ghz orthos stable for just over 2 hours now. I post my results for comarison this his 6850. Very interested to see if we get similar results.

[crossg]

Nice clocks. My L772A does about the same, stable @ 3.9. 1.51 Vcore but 4.0 keeps failing after a few hours with 1.53 vcore. Core temp runs about 55-62 deg and I hear a click from my PC then about a second later one of the cores fails prime. I am thinking the CPU is throttling of course it could be a hundred other things but I don't trust the reported temps from any of my apps because my ambient was 27deg c when I took this shot. Still 3.9 is a nice speed for me hell even 3.8.

[hlonipha]

Strap ; auto
fsb frequency ; 425
pci frequenecy ; 101
dram frequenecy ; 850 (1:1)
command rate ; 2T
timing control ' manual 5:5:5:15
AUTO
AUTO
AUTO
AUTO

cpu + pcie spread spectrum ; disabled
cpu voltage ; 1.5vcore
voltage reference ; auto
damper ; auto
PLL voltage ; 2.1
Dram votlage ; 2.2
termination ; 1.5
nb voltage ; 1.8
nb reference ; auto
sb voltage ; 1.2

CPU ratio ; Manual
cmos ; 9
DISABLED
DISABLED
ENABLED
DISABLED
ENABLEd
ENABLED

3.8ghz on air with 1.5vcore giving me 40c Idle and 55c Load.

good clocks, try ram with 1t timmings here you go

[michaLcoughliN]

But your only stable for 9 seconds? LOL. dude show something on the lines of this..Posting an image of 9 seconds doesnt mean anything to me. Defintaly doesnt mean its stable. run it for 10 hours then post back please




10 hours..

[hlonipha]

But your only stable for 9 seconds? LOL. dude show something on the lines of this..Posting an image of 9 seconds doesnt mean anything to me. Defintaly doesnt mean its stable. run it for 10 hours then post back please




10 hours..

jejejeje
Mine has been stable for more than 12hrs blend orthos and more than 18hrs on small ftt. I just wanted to show the clock as some cpuid do not show the clocks speed correctly. not trying to impress you at all. just though I show my stable clocks (yes orthos SMALL and BLEND tests, 3d mark 06 MAX settings for over 8hrs loop test with ALL test included, superpi, memtest and if you have any other proggy you would like for me to try) I will. I have posted 4.0GHZ and 4.1 GHZ screen shots after 2 hrs ORTHOS runs on this and other forum boards not to impress you but to help others with my findings, I've spent over 6 long days of research on this new motherboard and cpu. Again my intent was not, "who has the better overclock" but to spread my findings and sujest command 1T for a faster overclock take it or leave it. Young kid behind the keyboard

[michaLcoughliN]

im not saying that at all. I just see a lot of people not backing up what they have to say. a lot of bogus overclocks IMO.. I only believe SS of 10+

I mean yah i can boot up at 4.5 and show u a 9 second orthos SS but its not stable watsoever.. lol


Anyways, I cant go higher without raising Vcore as of now. Hopefully by next month ill take the time and purchase some watercooling accessories. And try for higher clocks. But as of now. 3.8ghz 24.7 is good enough for me. Huge improvement on my old E6300 @ 3.3ghz

But yet again I have a few other goodies in current rig to help out with that. :p

I think 3.8 ghz has shown to be the sweet spot for 24.7 use on most of the E6850 chipsets, Would like to see mine hit 4ghz though. Itll prolyl take 1.55vcore. But I can not do that on current HSF. since temps load 60+ on 1.55 and idle around 40.

As of now I idle at 30-34c and load @ 55-58c . Im happy with my results.

[Marco André]

Nice!

[hlonipha]

im not saying that at all. I just see a lot of people not backing up what they have to say. a lot of bogus overclocks IMO.. I only believe SS of 10+

I mean yah i can boot up at 4.5 and show u a 9 second orthos SS but its not stable watsoever.. lol


Anyways, I cant go higher without raising Vcore as of now. Hopefully by next month ill take the time and purchase some watercooling accessories. And try for higher clocks. But as of now. 3.8ghz 24.7 is good enough for me. Huge improvement on my old E6300 @ 3.3ghz

But yet again I have a few other goodies in current rig to help out with that. :p

I think 3.8 ghz has shown to be the sweet spot for 24.7 use on most of the E6850 chipsets, Would like to see mine hit 4ghz though. Itll prolyl take 1.55vcore. But I can not do that on current HSF. since temps load 60+ on 1.55 and idle around 40.

As of now I idle at 30-34c and load @ 55-58c . Im happy with my results.

I was reccomending for you to try your ram at command 1t thus why I posted my pictures to give you an idea. 3.8 ghz is very nice, but you can still tweak your ram to achieve a much better overclock overall. then you can have best capable (for now) cpu clocks and best achievable ram speeds.

Good luck

[michaLcoughliN]

thanks for your input

[NKD]

here are my oc results so far. vcore under load 1.54v, so far 2+ hours orthos stable and still going. Temps 47c right mark and 50c core temp.

[hlonipha]

Here you go