[DFI 680i LT] awesome results and Bios setting pictures.

[VictorWang]

personally, it's the best mobo DFI made within 2years.

ambient=26c
cpu with watercooling
supertalent ddr2-1000 c4 1g*2
RaptroX, SilverstoneOP1000w

For C2D, use bios 2CTxxxx
Bios Setting:
vSPP=1.65v
vLDT=1.37v
CPU VTT=1.49v
GTL=auto
E6700 @ 535fsb dual-prime



For C2Q, use bios 4CTxxxx
Bios Setting:
vSPP=1.74v
vLDT=1.37v
CPU VTT=1.6v
GTL=170/95/95
QX6700 @ 410fsb wprime1024m



Ram 1T testing,
really amazing!
ddr2-1056 5449 1T reached.

and cpuz verify: http://vic.expreview.com/attachment/...56+1t+cpuz.jpg

ddr2-1000 5439 1T benchable



Tips for the mobo:
1) Do not disable EBD and VT in cpu feature.
2) NB and PWM must have active cooling, especially when u are running Quadcore.
3) when u are running C2D, do not have to change GTL setting.
4) when u are running C2Q, this GTL table for ur reference, do not set too high, or system would be unstable
GTL1 REF VTT
140 1.2
155 1.3
170 1.4
185 1.5
200 1.6

NB/GTL0/2/3 REF VTT
75 1.2
85 1.3
95 1.4
105 1.5
115 1.6

5) BSel Ref Table
BSEL0=267
BSEL1=133
BSEL2=200
BSEL3=350
BSEL4=333
BSEL5=333
BSEL6=350
BSEL7=350

[VictorWang]

Victor,
how tight can you boot at +400mhz mem?

dont quite understand ur meaning.
for me, 1200 4334-2T no problem.
trrd=trc=1
twr=3
twtr=7

[Solarfall]

mmm thats pretty nice fsb, actually really good.. too bad thats only for core duo. quad core scores dont not seem that mind blowing..

BTW does this board make that whining ( 680i sli boards) noise while the cpu is under load..

[erwinz]

victor your the man.. nice score.. go for some WR..

[over@locker886]

really great

What can run this QX6700 in Asus Commando or P5B-D(FSB)?
I'm curious DFI can better fsb support..

Sent PM..

[VictorWang]

really great

What can run this QX6700 in Asus Commando or P5B-D(FSB)?
I'm curious DFI can better fsb support..

Sent PM..

u can expect a 680i mobo have same fsb ability for quadcore as p35/965.
on p35, the chip can do 490fsb stable.

sorry not reply ur pm, tooo busy these days, 4weeks no rest.



to Solarfall:
no strange noise came out.

[over@locker886]

u can expect a 680i mobo have same fsb ability for quadcore as p35/965.
on p35, the chip can do 490fsb stable.

sorry not reply ur pm, tooo busy these days, 4weeks no rest.

aha,thx infos.

Ok, I understand, no problem.

[Solarfall]

thanks VictorWang seems like i may have to get this mobo.. the whining noise from my evga is driving me mad.

[lionel57000]

have you tried in air cooling only ?

[century child]

[QUOTE=VictorWang;2195423
Tips for the mobo:
1) Do not disable EBD and VT in cpu feature.
2) NB and PWM must have active cooling, especially when u are running Quadcore.
3) when u are running C2D, do not have to change GTL setting.
4) when u are running C2Q, this GTL table for ur reference, do not set too high, or system would be unstable
[/QUOTE]

Thanks for taking the time to share your results with us. I'm curious about some of your tips. Could you please explain why it is that you recommend leaving the CPU features EDB and VT enabled?

[VictorWang]

have you tried in air cooling only ?

tried under my ss, but isolation job not finished, so nearly damaged the mobo.
but luckily it suvived.
will try under LN2 later.

Thanks for taking the time to share your results with us. I'm curious about some of your tips. Could you please explain why it is that you recommend leaving the CPU features EDB and VT enabled?

u will have problems when disable that 2 features.
if u disable them and adjust vid in bios, u might be always fxxx up with bios safe mode.

[Solarfall]

sorry for the off topic put i just saw in your sig that you belong to Uni team. not sure that are you or your team mates aware of it but uni actually means a dream in Finnish. so good choice on the name mate

[virtualrain]

Victor, nice results... you make it look easy!

What has that QX6700 done in other boards at x9?

Also, not that this is important, but I tested all the BSEL settings on my quad and both BSEL3 and BSEL6 booted my board at 333. Only BSEL7 seemed to work at 350 on my setup.

[VictorWang]

sorry for the off topic put i just saw in your sig that you belong to Uni team. not sure that are you or your team mates aware of it but uni actually means in a dream in Finnish. so good choice on the name mate

haha, thx.
I dont know Uni means "dream" in finnish.
our meaning: the UNIon of UNIted UNIque overclkers in China.
so u can see why we choose "UNI"

Victor, nice results... you make it look easy!

What has that QX6700 done in other boards at x9?

Also, not that this is important, but I tested all the BSEL settings on my quad and both BSEL3 and BSEL6 booted my board at 333. Only BSEL7 seemed to work at 350 on my setup.

it not so easy like in the post.
took me 3days to have these results and many discuss with DFI FAE.
I really hope my "Tips" can help u guys waste less time and have a easy overclking

this qx67 can do 490fsb on asus p35.
330fsb on nv680i reference board
333fsb on rd600

I let BSEL=auto

[virtualrain]

Hey, I'm glad I wasn't the only one to take a few days to get a stable overclock on this board!

Another question Victor, the original GTL NB values that were published by Tony on his overclocking guide at TTR, are lower than GTL 0/2/3 recommended values...

VTT 1.2V...GTL1=140, GTL2=75 and NB GTL= 75
VTT 1.3V...GTL1=155, GTL2=85 and NB GTL=80
VTT 1.4V...GTL1=170, GTL2=95 and NB GTL=85
VTT 1.5V...GTL1=185, GTL2=105 and NB GTL=90
VTT 1.6V...GTL1=200, GTL2=115 and NB GTL=95

Yet your recommendations seem to have NB GTL = GTL2... can you confirm? Is this the latest recommendation from DFI?

Can you share your voltage settings and or post a pic of the bios screen that you used for 410x9 on the Quad?

Thanks.

[Eldonko]

Great work victor, thanks for sharing. Now get some rest!

[Tony]

NB is real high here, as soon as I set over 1.62 with weak cpu drive the board hangs on every post...so the question is:

Weak or strong drive Victor when you have the NB voltage so high.

Moving on, can you run 9x1600 linked and sync 1T with 6 hrs orthos with a dual core and the same with a quad, stability at 3.2ghz is fine...you really need to load the board up on air cooling and see how it does.

T

[VictorWang]

NB is real high here, as soon as I set over 1.62 with weak cpu drive the board hangs on every post...so the question is:

Weak or strong drive Victor when you have the NB voltage so high.

Moving on, can you run 9x1600 linked and sync 1T with 6 hrs orthos with a dual core and the same with a quad, stability at 3.2ghz is fine...you really need to load the board up on air cooling and see how it does.

T

I had run 400*9 1.4v quad-prime for 12mins. (cpu can stable at 1.36~1.376v). but got blue screen after that.
maybe somewhere is too hot.

my rig:
cpu=qx6700es b3 with watercooling.
mobo=dfi 680i lt, bios=4CTxxxxx
ram=pdp ddr2-667 3224 1g*2

and my bios setting here for 1440fsb, 800-1T-C3 ram:
volts. control.


fsb/clk control.


ram timings



results:
http://vic.expreview.com/attachment/...+1t+1m_sis.jpg

and more here: http://vic.expreview.com/read.php?122

[REBEL900]

Very nice..

[nugzo]

I'm realy impressed with the 1T @ 500. What will that memory do on other 680i's as well as other chipsets? Is this board that much more 1T friendly than the others?

[freecableguy]

RD600 can and will handle DDR-1000 at 1T.

[VictorWang]

RD600 can and will handle DDR-1000 at 1T.

my RD600 is really sux for 1T, even ddr2-800 1t is a hard mission.

DFI 680i LT, holy mobo for ram at 1T, i never have >960 1T on other mobo.

[pie_uk]

shame about the clip mechanism on the nb.

Also why isnt this board for sale anywherE?

[hipro5]

The only disadvantage I can see, is that DFI have gone to "digital IC power Mosfets"....SAME mistake as ABIT IN9 did....
Heavy load user will be dissapointed....

[EvilMoe]

Sorry for that question, but what is the disadvantage about these "digital IC power Mosfets" ?