Results 1 to 24 of 24

Thread: QX6800 G0 L712A638 (4200MHz on air)

  1. #1
    Nice Hardware!!!
    Join Date
    Jan 2006
    Location
    Finland/Tampere
    Posts
    1,846

    Thumbs up QX6800 G0 L712A638 (4200MHz on air)

    I just tested my new QX6800 ES. I have to say that I'm impressed.

    I can bench Wprime at 4GHz (1.56V) on aircooling. It can do 3.7GHz with default voltage 1.32V. G0 rocks!

    Setup: Crappy ASUS cooler on cpu.


    CPU:


    Max MHz 1.6V(4200):
    http://valid.x86-secret.com/show_oc.php?id=221101

    Max fsb on air (490):
    http://valid.x86-secret.com/show_oc.php?id=221102

    Wprime @ 4GHz 1.56V (aircooled) Bad time for some reason? Maybe too hot.

    You are as good as your samples are!

  2. #2
    NREMT-I
    Join Date
    Jul 2005
    Location
    near Atlanta Georgia (and hate it)
    Posts
    2,454
    Holy SMOKES
    Nothing anymore

  3. #3
    Xtreme Guru
    Join Date
    Jun 2006
    Location
    Finland, joensuu
    Posts
    3,527
    i hate you... i would have to sell one of my kidneys so that i could afford to buy that chip..
    but anyways sweet clocks bro ..
    there on earth do people find these ES cpus??
    is lukes cascade working ??? you need to get that chip under it asap
    Evga X58 sli under cascade
    http://www.xtremesystems.org/forums/...d.php?t=219788
    Evga X58 Sli ultimate overclocking/ overview/ discussion thread
    http://www.xtremesystems.org/forums/...d.php?t=221082


    proud owner of E8600 Q822A435

  4. #4
    Xtreme Enthusiast
    Join Date
    Feb 2007
    Posts
    636
    Can you post a coretemp or speedfan screenshot after 30-40 minutes of load @ these settings? I'm curious what your temps are...

  5. #5
    Xtreme Addict
    Join Date
    Dec 2006
    Location
    Vegas ,NV
    Posts
    1,636
    those asus coolers are actually very good. i saw a round up in cpu power, and on a website. they rated the silent knight just above tuniq tower and below ultra 120
    ~

  6. #6
    Xtreme Addict
    Join Date
    Feb 2004
    Location
    Finland
    Posts
    1,462
    Quote Originally Posted by strange|ife View Post
    those asus coolers are actually very good. i saw a round up in cpu power, and on a website. they rated the silent knight just above tuniq tower and below ultra 120
    Yeah but that's with max fan speed. Tuniq and Ultra 120 can do same temps with less db. korrrhonen nice g0 you got there
    [i5 2500K, ASrock extreme3 gen3, Corsair Vengeance LP 8GB 1600MHz, Palit GTX570 Sonic Platinum, CM HAF932, Antec Truepower New 650w]

  7. #7
    Xtreme Member
    Join Date
    Jun 2006
    Posts
    137
    G0 ftw.

    Nice results.
    Processor: Intel Core 2 Quad Q6600 G0 2.4@3.33 Ghz (1.28 vcore under load) with Arctic Cooling Freezer 7 Pro
    Videocard: BFG GTX 260 w/ Dell SP2309W
    Mainboard: Asus P5Q-E Pro w/ Antec TruePower 2.0 550 SLI-Ready in Antec 900
    Memory: 4GB @ DDR2-740.
    Speakers/Sound card: Logitech Z-2300 w/ Creative Labs X-Fi Xtreme Music
    Harddrives: RAID0 with 2 x 500GB Seagate Barracudas SATAII

  8. #8
    Xtreme Member
    Join Date
    Apr 2005
    Location
    Finland/Järvenpää
    Posts
    229

    You got the Good ONE my friend! Nice results with "that" CPU-cooler.
    Kick it ass!
    Finnish Overclocking Team


    E6600 @ 100% OC with Co2 | FX57 SuperPi 8M @ 4min 5.281s
    Abit IP35-Pro
    E8500
    XFX8800GTS (G92)
    aXeRam 2Gb PC-6400
    TT 750W
    Auzen Prelude 7.1 X-Fi
    TT Mozart |



  9. #9
    Nice Hardware!!!
    Join Date
    Jan 2006
    Location
    Finland/Tampere
    Posts
    1,846
    Quote Originally Posted by graysky View Post
    Can you post a coretemp or speedfan screenshot after 30-40 minutes of load @ these settings? I'm curious what your temps are...
    I don't think that this is stable enough to do so. I didn't test 1024m, but running Wprime 32m, all cores were between 75-84 c.

    Ambient temperature were ~25c

    Next I will try my cascade. It's not 100% working at the moment, but I hope to achieve 5GHz
    You are as good as your samples are!

  10. #10
    Xtreme Enthusiast
    Join Date
    Sep 2004
    Posts
    652
    Great clocks!

    What is the best you can do fully stable?

    Sidenote* That processor is going for $1500 on newegg right now
    HTPC - AMD Phenom II 555 Unlocked(4cores) - 4GB Gskill - AMD HD 5850 - Avermedia Duet - Harman Kardon avr247 - Surround Sound (Infinity Beta 50's, 10's, 360, and ed a2-300) - Samsung 46"

    Desktop Powerhouse PC - Gathering dust due to high usage of HTPC as general pc now

  11. #11
    Xtreme Member
    Join Date
    Jul 2006
    Location
    Northern IL.
    Posts
    221
    Very nice!
    Core 2 Quad Q6600 G0 L723A930
    3.6GHz 24/7
    ASUS P5K Deluxe Mobo
    Thermalright Ultima-90
    Sapphire HD 2900 XT
    2x1G Mushkin XP2 DDR2 800MHz
    OCZ GameXStream 700W PSU
    Antec 900 Case
    2X WD Raptor
    Vista

  12. #12
    Xtreme Addict
    Join Date
    Jun 2005
    Location
    Durham University, UK
    Posts
    1,143
    Sweet chip mate
    The rig
    CPUs: E6300 ES B0 @ 3220 MHz w/1.35v orthos stable | E6600 B2 @ 3400 MHz w/1.43v --> Sold | Xeon 3050 L2 @ 3304 MHz w/1.45v orthos stable
    MoBo: Asus P5K-E WiFi-AP @ 520 x * orthos stable
    Graphics: 256 MB Connect 3D Radeon X1900XT @ 661/828 (core/mem)
    RAM: 2 x 1 GB Team Xtreem PC2 5300 @ DDR1010 4-4-4-8 / DDR1100 5-5-5-12 w/2.25v orthos stable
    HDDs: 300 GB (16 MB Cache) and 80 GB Maxtor Diamondmax 10 drives
    Optical: NEC ND3500AG DVD +/- RW
    PSU: Antec True Power 2.0 550W
    H2O
    Swiftech MCR220-QP | Laing D5 | AquaXtreme MP-05 Pro LE | DangerDen Maze 4 LP | 2 x 120mm NoiseBlocker SX1 fans
    Lappy
    MSI MS1022 14.1" Widescreen Barebone | Celeron-M 360 1.4 GHz @ 1.86 GHz / Pentium M 715A | GeForce 6200 Go | 80 GB Fujitsu HDD | Sony DVD +/- RW
    Waiting for
    Nehalem

  13. #13
    Xtreme Guru
    Join Date
    Jun 2006
    Location
    Finland, joensuu
    Posts
    3,527
    Quote Originally Posted by SF3D View Post
    I don't think that this is stable enough to do so. I didn't test 1024m, but running Wprime 32m, all cores were between 75-84 c.

    Ambient temperature were ~25c

    Next I will try my cascade. It's not 100% working at the moment, but I hope to achieve 5GHz
    cant wait for the cascade runs... lets hope that you will get +5ghz
    Evga X58 sli under cascade
    http://www.xtremesystems.org/forums/...d.php?t=219788
    Evga X58 Sli ultimate overclocking/ overview/ discussion thread
    http://www.xtremesystems.org/forums/...d.php?t=221082


    proud owner of E8600 Q822A435

  14. #14
    Xtreme Mentor
    Join Date
    Mar 2007
    Posts
    2,588
    Is it an engineering sample chip?

    I dont see a intel spec sheet..so....

    not sure about the ES but the non ES has a TDP of 130watts!

  15. #15
    Nice Hardware!!!
    Join Date
    Jan 2006
    Location
    Finland/Tampere
    Posts
    1,846
    Yes, this is ES chip.

    I will test this under my cascade today or tomorrow.
    You are as good as your samples are!

  16. #16
    Wuf
    Join Date
    Jul 2007
    Location
    Finland/Tampere
    Posts
    2,400
    Where hell u get these ES cpus?
    I wanna too
    You use IRC and Crunch in Xs WCG team? Join #xs.wcg @ Quakenet
    [22:53:09] [@Jaco-XS] i'm gonna overclock this damn box!
    Ze gear:
    Main rig: W3520 + 12GB ddr3 + Gigabyte X58A-UD3R rev2.0! + HD7970 + HD6350 DMS59 + HX520 + 2x X25-E 32gig R0 + Bunch of HDDs.
    ESXI: Dell C6100 XS23-TY3 Node - 1x L5630 + 24GB ECC REG + Brocade 1020 10GbE
    ZFS Server: Supermicro 826E1 + Supermicro X8DAH+-F + 1x L5630 + 24GB ECC REG + 10x 3TB HDDs + Brocade 1020 10GbE
    Lappy!: Lenovo Thinkpad W500: T9600 + 8GB + FireGL v5700 + 128GB Samsung 830 + 320GB 2.5" in ze dvd slot + 1920x1200 @ 15.4"


  17. #17
    Xtreme Cruncher
    Join Date
    Jul 2003
    Location
    Finland, Eura
    Posts
    1,744
    Great, spank that CPU real hard under cascade


    http://mato78.com - Finnish PC Hardware news & reviews
    BulldogPO @ Twitter


  18. #18
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,651
    Woah very nice cpu .. how about wprime 1024M ?

    my Xeon X3230 with wPrime 32M + 1024M @4000Mhz at 1.64v and max cpuz validation also at 1.64v of 4112Mhz!

    water cooled of course heh



    ---

  19. #19
    Xtreme Mentor
    Join Date
    Aug 2006
    Location
    Atlanta
    Posts
    3,286
    Very nice results looking forward to some cascade action
    Never empower an idiot with a response....

    http://en.wikipedia.org/wiki/Troll_%28Internet%29

    Seller/Buyer Reputation:
    Heatware: http://www.heatware.com/eval.php?id=50905
    Ebay: {Family Account} Kasyg3 http://myworld.ebay.com/kasyg3/
    Ebay: {My personal Account} Sdumper http://myworld.ebay.com/sdumper/
    iTrader: http://www.blazingpc.com/forum/itrader.php?u=28

  20. #20
    Xtreme Enthusiast
    Join Date
    Jan 2005
    Location
    daytona beach florida
    Posts
    755
    nice cpu you got there!
    Q6600 L723A (400 x9)
    Evga 780i P02
    G.skill 8 GB
    Evga GTX 280
    Raptor X (3) 150's Raid 0
    Targen BZ 1100w
    Thermalright Ultra Extreme 120
    Vista Ultimate x64
    Xclio

  21. #21
    Xtreme X.I.P.
    Join Date
    Jun 2004
    Location
    France
    Posts
    1,368
    Good Cpu yeah !!!
    OCM Member / IXTREMTEK Admin !!



    DDR1 2*256 BH5 Adata @324.7Mhz 1.5/2/2/5 1T at 4v @318.6Mhz Benchs
    DDR2 1*512 Kingston Pc8500 @702Mhz 5/5/5/18 at 2.42v réel
    DDR2 2*1024 Cell Shock Pc8000c4 @534Mhz 3/3/3/8 at 3.5v réel

    Cooling : XP90C , Big Typhoon , waterchiller R507 , LN2 ....

  22. #22
    Xtreme Member
    Join Date
    Nov 2004
    Location
    France
    Posts
    298
    this one from bob too

    i7 3960X@5ghz, Asus Rampage IV Extreme, 8gb Gskill RipjawsZ PC19200C8, Corsair force GT 240go, 2XGTX Titan, MM Ascension, Seasonic X-serie Gold 1250W, Watercooling

    i7 3930K@5ghz, Asus Rampage IV Extreme, 8gb Gskill RipjawsZ PC17000C9, OCZ Vertex 3 120go, GTX670 DCU2 Top, MM Pinnacle, Corsair AX850, Watercooling

  23. #23
    Xtreme X.I.P.
    Join Date
    Jun 2004
    Location
    France
    Posts
    1,368
    Same Cpus , Same Overclocking !!!

    I had make a good selection
    OCM Member / IXTREMTEK Admin !!



    DDR1 2*256 BH5 Adata @324.7Mhz 1.5/2/2/5 1T at 4v @318.6Mhz Benchs
    DDR2 1*512 Kingston Pc8500 @702Mhz 5/5/5/18 at 2.42v réel
    DDR2 2*1024 Cell Shock Pc8000c4 @534Mhz 3/3/3/8 at 3.5v réel

    Cooling : XP90C , Big Typhoon , waterchiller R507 , LN2 ....

  24. #24
    Registered User
    Join Date
    Aug 2006
    Posts
    16
    SF3D,

    Interesting, I have an L712A200 Q6600 that is a B3 Step.

    I have the deluxe Also, Could you post your bios settings?

    Emmett

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •