Page 1 of 3 123 LastLast
Results 1 to 25 of 55

Thread: DFI LAN Party UT NF680I LT SLI-T2R 1T 3d benching

  1. #1
    Xtreme X.I.P.
    Join Date
    Feb 2006
    Posts
    2,745

    DFI LAN Party UT NF680I LT SLI-T2R 1T 3d benching

    Been working close with Tony, getting this thing up and high, have cracked ddr1000 1T cas 4, just need some work in finding stability, that is in sync mode btw @ 500fsb.

    In any case, the best performance point according to Tony, and confirmed for me via my own experience is to run fsb at 1900-1920 in Sync mode, giving around ddr 900 to 917 1T. I'll leave the explanation of that stuff to the man who found the performance point via a lot of toil (Tony), since I don't believe in ripping off another man's work or IP and calling it my own.

    Board boots out of bios @ 500fsb and above, I have not yet tried to find the maximum, as i have been concentrating on the performance point...

    So Kudos, to Tony, Bingo13 and Rgone, Jimmy and Oskar who have worked tirelessly to get this board rocking hard. Those of you who will have the board for benching will soon find out that there are definite advantages to Oskar not picking up a reference design board

    Back to the fun part this board is crazy fast, bear in mind I'm not even a great bencher or tweaker, I leave that stuff to the big boys.

    Latency in everest is around a sweet 40.7 ns on the 1900fsb run, obviously 3d mk 03 won't make full use of the latency, but well maybe fun times and an indicator for the super pi fans especially 32m...

    Components of interest that were used

    X6800
    NB water cooled with DD Chipset Cooler
    2 GB OCZ Reaper 9200
    SS cooling on cpu...
    2x 8800 GTX @ 625/1000 NO LOD used at all, or any other tweaks, staright XP install, no tricks, hacks cheats or funky undisclosed cooling other than the SS unit.





    first up a 1760fsb run in sync mode,





    and another @ 1900fsb

    Last edited by Raja@ASUS; 05-04-2007 at 03:08 PM.

  2. #2
    the jedi master
    Join Date
    Jun 2002
    Location
    Manchester uk/Sunnyvale CA
    Posts
    3,885
    fastest for me with this CPU and board...not all will do 500fsb so you need at least a 9 multi IMO

    975 1T Reaper 9200.

    Last edited by Tony; 05-04-2007 at 03:37 PM.
    Got a problem with your OCZ product....?
    Have a look over here
    Tony AKA BigToe


    Tuning PC's for speed...Run whats fast, not what you think is fast

  3. #3
    Xtreme Addict
    Join Date
    Jul 2006
    Location
    Vancouver, BC
    Posts
    2,061
    Good to see this board can be a top performer in the right hands! How it will do in my hands, is another matter, yet to be seen

  4. #4
    Xtreme Addict
    Join Date
    May 2006
    Location
    Herbert's House in Family Guy
    Posts
    2,389
    quad core ocing ... can it do 400+fsb??
    E6600 @ 3.6
    IN9 32x MAX
    EVGA 8800Ultra
    750W

  5. #5
    Xtreme X.I.P.
    Join Date
    Feb 2006
    Posts
    2,745
    I have not popped in my quad yet will try soon, if required I'll even send it to Tony..

    Regards
    Raja

  6. #6
    Xtreme Addict
    Join Date
    Nov 2002
    Location
    Houston
    Posts
    1,121
    Quote Originally Posted by theteamaqua View Post
    quad core ocing ... can it do 400+fsb??
    Yes... I am working on the Quad core now with a specific Quad BIOS from Oskar.

  7. #7
    Xtreme Member
    Join Date
    Jan 2006
    Location
    Germany
    Posts
    105

    Wink

    Quote Originally Posted by theteamaqua View Post
    quad core ocing ... can it do 400+fsb??
    my X3210 is running right now 8x400 on it @1,35Vcore .... more as soon as i have more tests completed ...
    . Intel E6600@3,8GHz@1,46V Retail Week 29 - Intel E6600@3,7GHz@1,38V Retail Week 30 - Intel E6600@3,6GHz@1,336V Retail Week29 .
    . DFI LP ICFX3200-T2R/G - Asus P5W64 WS Pro - Asus P5W64 WS Pro - Asus P5WDG2 WS Pro .
    . AMD Opteron 150 0547GPMW @3120@1,52V .-. AMD Opteron 170 0550VPMW @3300@1,456V .
    . DFI Lanparty nF4 SLI-DR Expert - nF4 SLI-DR Venus .
    . watercooled by NexXxos XP / MoRa 2 Pro / 9 x iXtrema 120 14dBA .

  8. #8
    Xtreme Addict
    Join Date
    Jul 2006
    Location
    Vancouver, BC
    Posts
    2,061
    Where can we get the latest BIOS from? I'll be in need of the best quad core bios tomorrow.

  9. #9
    Xtreme Enthusiast
    Join Date
    Jan 2006
    Location
    New Hampshire (USA)
    Posts
    998
    Exciting stuff guys, thanks for keeping the thread updated frequently!
    Asus Maximus III Formula (2001)
    Intel i7 860 (L924B516)
    Noctua D14
    Corsairs CMG4GX3M2A2000C2 (2 x 2GB) RAM
    eVGA GTX480
    DD-H20
    BIX GTX360
    MCP35X PWM
    Creative X-Fi Titanium PCI-e
    LG GGC-H20L Blu-Ray
    Toughpower 850w Modular
    GSkill Phoenix Pro SSD 120GB


    HEAT

  10. #10
    Xtreme Addict
    Join Date
    Oct 2004
    Location
    Tampa, FL
    Posts
    2,108
    Tony...so not all boards are capable of 500fsb or not all cpus will run 500fsb even with multiplier turned down?
    My Heat
    i5 2500k @4.5ghz Raystorm
    Asus P8Z68-V Pro/Gen3 16gb(4x4) G.Skill PC12800 Ripjaws X
    x1900xt MCW60
    Rad: Thermochill PA120.3 3YL SL/ Pump: DDC2 w/ Petra's top 7/16in ID masterkleer
    Corsair 120gb Force GT SSD/ 1TB WD Black Caviar SATA
    X-Fi music/SH-203B/H62L/LH-20A1L
    Corsair HX620w /Acer AL2223W/modded TJ07

  11. #11
    Xtreme Cruncher
    Join Date
    Jul 2006
    Posts
    638
    Can you run >533 unlinked with 1T. My best bandwidth and latency times were at these settings and they stay 24/7 stable on Striker. That will make my decision to switch to this board.

  12. #12
    Xtreme Enthusiast
    Join Date
    Jan 2006
    Location
    New Hampshire (USA)
    Posts
    998
    Wow, 533 @ 1T, what timings do you run to keep that 24/7 stable? In anycase very impressive!
    Asus Maximus III Formula (2001)
    Intel i7 860 (L924B516)
    Noctua D14
    Corsairs CMG4GX3M2A2000C2 (2 x 2GB) RAM
    eVGA GTX480
    DD-H20
    BIX GTX360
    MCP35X PWM
    Creative X-Fi Titanium PCI-e
    LG GGC-H20L Blu-Ray
    Toughpower 850w Modular
    GSkill Phoenix Pro SSD 120GB


    HEAT

  13. #13
    Xtreme Member
    Join Date
    Jun 2006
    Location
    México
    Posts
    460
    How would it be compared to Coolalers QX6800 @ 450FSB?
    I´d like to see QX6700 OC.

  14. #14
    Xtreme X.I.P.
    Join Date
    Feb 2006
    Posts
    2,745
    Quote Originally Posted by Kain XS View Post
    How would it be compared to Coolalers QX6800 @ 450FSB?
    I´d like to see QX6700 OC.
    well give Bingo13 and me some time, and we should have something, fwiw if we find 450 you'll find they really do 450, I can't speak for results from previous bios's and users....

    regards
    Raja

  15. #15
    Xtreme X.I.P.
    Join Date
    Feb 2006
    Posts
    2,745
    another 03...





    01



    no LOD used in either run, 165 drivers and gpu's @ 625/1000




    a 1m -1 core switched off...

    Last edited by Raja@ASUS; 05-05-2007 at 12:55 AM.

  16. #16
    the jedi master
    Join Date
    Jun 2002
    Location
    Manchester uk/Sunnyvale CA
    Posts
    3,885
    the NB chipset is the key to doing 500fsb, most will run 480 or so with a few doing 500 and higher. My board will do 480 no problem...500 no way but with the strap change at 500 that goes a lot looser why would i want too?.

    raja hinted at 450fsb...sync mode, trust me thats where you want to run the board

    you guys are all fixated with 500+fsb, you really should be looking at where the boards make the best speed and buy the cpu to suit.
    Last edited by Tony; 05-05-2007 at 01:41 AM.
    Got a problem with your OCZ product....?
    Have a look over here
    Tony AKA BigToe


    Tuning PC's for speed...Run whats fast, not what you think is fast

  17. #17
    Xtreme X.I.P.
    Join Date
    Feb 2006
    Posts
    2,745
    fully agree man, the latency that you can hit easily at 1900-1920 just simply rocks in sync mode. I am finding myself getting into the top 30 on the bot with stock gpu clocks...

    regards
    Raja

  18. #18
    Xtreme X.I.P.
    Join Date
    Feb 2006
    Posts
    2,745
    http://www.thetechrepository.com/showthread.php?t=163


    Tony's guide....


    btw sync clocking is sweeter on the reaper pc9200 than my cellshock cas 4
    Last edited by Raja@ASUS; 05-05-2007 at 02:29 AM.

  19. #19
    Xtreme Cruncher
    Join Date
    Jul 2006
    Posts
    638
    Quote Originally Posted by Roger_D25 View Post
    Wow, 533 @ 1T, what timings do you run to keep that 24/7 stable? In anycase very impressive!
    4-4-4-5, 4-4-3-5 for benching.

    Takes 2.3v on Dominator 8888. 2.34 on OCZ TI 8000

    Been running for a few months that way. Have some screenshots on imageshack somewhere. Latency is 37.5 and Bandwidth is 128xx. I had some bandwidth shots narrowly to 13k at 1100, but timings need to be looser to get that high.

  20. #20
    Xtreme Cruncher
    Join Date
    Jul 2006
    Posts
    638
    Quote Originally Posted by raju View Post
    http://www.thetechrepository.com/showthread.php?t=163


    Tony's guide....


    btw sync clocking is sweeter on the reaper pc9200 than my cellshock cas 4
    Also it is not sync clocking. I learned along time ago that OCZ is doing something with their SPD to run 1T different.

    Flash SPD from an OCZ stick on your cellshock and it will increase.

    Most of my sets were dieing around 960-970 sync, then I flashed OCZ SPD and got another 100-130 mhz .

    http://img213.imageshack.us/img213/3...1trockscm2.jpg

    Trick is 7:9 strap is very fast and very stable. That is the only bandwidth shot I can find. Sandra bandwidth of 9000 is pretty good, I believe I got up to 9,300 when I was really tweaking it though.
    Last edited by Yoxxy; 05-05-2007 at 05:09 AM.

  21. #21
    Xtreme X.I.P.
    Join Date
    Feb 2006
    Posts
    2,745
    this is boot from bios, about to bench so more later...

    QX6700




    this board is all about gtl ref tuning for quads...

  22. #22
    Xtreme Member
    Join Date
    Feb 2005
    Location
    Lynchburg, VA
    Posts
    268
    Quote Originally Posted by raju View Post
    this is boot from bios, about to bench so more later...

    QX6700




    this board is all about gtl ref tuning for quads...
    If that is Mr. Wu's result on fixing the quadcore issues on the 680i boards, I'm sold. I am tired of working on this IN9 32X
    DFI 680i LT
    Intel Q6600 @ 3.2 Quad Prime Stable @1.3675 and climbing. VRM Temps issues now.
    Apogee GT, Laing D5, BI Stealth 240, EK 8800GTX WB
    EVGA 8800GTX @ 625/1000 Load Temps 49c
    2x Raptor 74GB, 4x WD 400GB, 2xSegate 7200.10 500GB
    Lian Li V2000 Black
    PCP&C Turbo Cool Custom 1KW

  23. #23
    Xtreme X.I.P.
    Join Date
    Feb 2006
    Posts
    2,745

    450fsb 06 passed!!!!

    qx6700 450 fsb, 3d bench...


    untweaked ram stock clocks of 625/1000 on cards @ 4ghz cpu speed...



    Last edited by Raja@ASUS; 05-05-2007 at 08:35 AM.

  24. #24
    Registered User Delly's Avatar
    Join Date
    Aug 2005
    Location
    Italy
    Posts
    65
    Quote Originally Posted by raju View Post
    qx6700 450 fsb, 3d bench...


    untweaked ram stock clocks of 625/1000 on cards @ 4ghz cpu speed...
    you have pvt! ...

  25. #25
    Xtreme X.I.P.
    Join Date
    Feb 2006
    Posts
    2,745
    upped pcie's to 131mhz and spp-mcp to 270, same configuration as above....


    Last edited by Raja@ASUS; 05-05-2007 at 10:19 AM.

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •