Page 4 of 14 FirstFirst 1234567 ... LastLast
Results 76 to 100 of 326

Thread: 8800Ultra 3dmark numbers

  1. #76
    Xtreme Recruit
    Join Date
    Nov 2002
    Posts
    95
    970MHz on GPU?!?!? WoW!!! What a card!!!!!!

    How was the OC limit with air cooling with NO electronic mod (V mods)???
    The resaults in 3rd page are made with this situation or did you used some Volt mods even that time??
    >> NEW "FLashRd ver.3.0 - FlashROM Disk for ATi Graphic Cards" <<
    >> Standard PC or Small Form Factor?? Well... SFF!! ...what a question.. <<

  2. #77
    Quote Originally Posted by PIRATA! View Post
    970MHz on GPU?!?!? WoW!!! What a card!!!!!!

    How was the OC limit with air cooling with NO electronic mod (V mods)???
    The resaults in 3rd page are made with this situation or did you used some Volt mods even that time??
    One of the cards went right to 988mhz for 03/06 on the STOCK BIOS with about 1.67v without even breaking below -70c base temps on one of my units. The other is almost the same. Sound like there is more left??

    As for the air benches, yes the card was modded, but vr's turned all the way down. Temperature was more of an issue around 720mhz using stock cooler than voltage. It could do about the same core clocks before modded.
    Ambient temps played more of a role when those runs were done, it was around 80F in the workspace. It's alot colder today so I may run it again and see how far over 16k single card 06 I can get on the all air rig.
    Pic of the P5K and ULTRA setup:

  3. #78
    Xtreme Recruit
    Join Date
    Nov 2002
    Posts
    95
    Thank you.

    What about the temperatures at stock clocks??

    Do you know if are equal/more/less then temeratures on 8800GTX with stock clocks??

    Is the cooling device better of worst the one mounted onto the 8800GTX??

    Thank you.
    >> NEW "FLashRd ver.3.0 - FlashROM Disk for ATi Graphic Cards" <<
    >> Standard PC or Small Form Factor?? Well... SFF!! ...what a question.. <<

  4. #79
    OCTeamDenmark Founder Nosfer@tu's Avatar
    Join Date
    May 2004
    Location
    Denmark, Copenhagen
    Posts
    2,335
    Are you happy about the P5K ?
    Former owner of OCTeamDenmark.com
    MSI MOTHERBOARD!!!!!!

    Linkedin


  5. #80
    Quote Originally Posted by Nosfer@tu View Post
    Are you happy about the P5K ?
    The board is pretty sick. Was doing over 460mhz in 06 with the quad earlier lol
    Dominator 10K's rip on this mobo. Flexing some shader muscle on the cards now too in single card benchmarks:

    Little better air numbers on 3d benches with silent knight cpu cooler, my best clocking b2 air chip and shader power:









    Last edited by k|ngp|n; 05-14-2007 at 03:51 PM.

  6. #81
    Champion
    Join Date
    May 2006
    Location
    Bangkok, Thailand
    Posts
    1,375
    Hello k|ngp|n, How you think PSU 1kW performance between GALAXY 1000W at Silverstone 1000W ?
    first time i need to turbocool 1kW but it can't to buy in my country

    Thank.
    Sorry For My English
    OverclockZone Team
    THAILAND

  7. #82
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    Quote Originally Posted by eva2000 View Post
    nah to us folks, that's pretty normal
    LOL i know what you mean



    KP nice cards
    can't wait to see how much back you have there
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  8. #83
    Quote Originally Posted by ZoLKoRn View Post
    Hello k|ngp|n, How you think PSU 1kW performance between GALAXY 1000W at Silverstone 1000W ?
    first time i need to turbocool 1kW but it can't to buy in my country

    Thank.
    Both PSU's are very nice and can handle this rig no problem. I interchange them all the time for testing around here and they both have never let me down. Also updated the last of the air 3d single card benchies in my previous post Diltech. I'm done with that

  9. #84
    xtreme energy
    Join Date
    Oct 2004
    Location
    Europe, Latvia
    Posts
    4,145
    Can I see that wallpaper?
    ...

  10. #85
    Xtreme Recruit
    Join Date
    Nov 2002
    Posts
    95
    Quote Originally Posted by PIRATA! View Post
    Thank you.

    What about the temperatures at stock clocks??

    Do you know if are equal/more/less then temeratures on 8800GTX with stock clocks??

    Is the cooling device better of worst the one mounted onto the 8800GTX??

    Thank you.
    And about the temps??
    >> NEW "FLashRd ver.3.0 - FlashROM Disk for ATi Graphic Cards" <<
    >> Standard PC or Small Form Factor?? Well... SFF!! ...what a question.. <<

  11. #86
    Quote Originally Posted by PIRATA! View Post
    And about the temps??
    Sorry missed ya. My overall impression is that the card runs cooler all around from air to top end ln2. These new stock coolers look cool, but they aren't very different from the gtx coolers. My gtx's seemed to run hotter.

  12. #87
    Xtreme Member
    Join Date
    May 2006
    Location
    Amon Tobin's world
    Posts
    230
    Hello Vince . What about consumption ? In full-load , of course . Of the entire system .
    Last edited by bonzo_catalin; 05-14-2007 at 05:45 PM.

  13. #88
    Xtreme Recruit
    Join Date
    Nov 2002
    Posts
    95
    Quote Originally Posted by k|ngp|n View Post
    Sorry missed ya. My overall impression is that the card runs cooler all around from air to top end ln2. These new stock coolers look cool, but they aren't very different from the gtx coolers. My gtx's seemed to run hotter.
    I hope so....
    I have ordered an Ultra because my GTX was too hot....
    >> NEW "FLashRd ver.3.0 - FlashROM Disk for ATi Graphic Cards" <<
    >> Standard PC or Small Form Factor?? Well... SFF!! ...what a question.. <<

  14. #89
    Champion
    Join Date
    May 2006
    Location
    Bangkok, Thailand
    Posts
    1,375
    Quote Originally Posted by k|ngp|n View Post
    Both PSU's are very nice and can handle this rig no problem. I interchange them all the time for testing around here and they both have never let me down. Also updated the last of the air 3d single card benchies in my previous post Diltech. I'm done with that
    Thank a lot, So i'll choose silverstone because this here price is lower than enermax, already you silverstone it OP1000 or ST1000 ?
    Sorry For My English
    OverclockZone Team
    THAILAND

  15. #90
    Quote Originally Posted by ZoLKoRn View Post
    Thank a lot, So i'll choose silverstone because this here price is lower than enermax, already you silverstone it OP1000 or ST1000 ?
    OP1000 is what I use.

    Hit 1ghz on the ultra core for Mark 03 today. 1.65v-1.7vgpu -80c to -85c
    CPU only at 3.6ghz/air on the striker and still nearly 62,000 single card lol.


    There will be a new 100k club soon no doubt.

    Quote Originally Posted by PIRATA! View Post
    I hope so....
    I have ordered an Ultra because my GTX was too hot....
    Well, one thing i noticed is that this new mem runs a little hotter than gtx, because i dont get as much frost forming around the mem chips like before. the card definitely requires good air circulation around it.
    Last edited by k|ngp|n; 05-15-2007 at 04:29 PM.

  16. #91
    Xtreme Member
    Join Date
    May 2006
    Location
    Dominican Republic (Caribbean)
    Posts
    215
    Quote Originally Posted by k|ngp|n View Post
    There will be a new 100k club soon no doubt.
    2003

    hehe nice k|ngp|n...

    are you going to try the xd 2900Xt for 2005?

  17. #92
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    hey KP i was recently given a tip to reduce my screenshots size almost ten fold in some instances and still have better quality captures too

    here is a guide.........it's dead easy
    basically Irafanview with PNGOUT plugin and reducing colours to 256 ^^^ image above would go down from 320Kb to around 40Kb

    just scroll down to SLI_dog's tips

    http://i4memory.com/showthread.php?t...ight=irfanview
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  18. #93
    Quote Originally Posted by dinos22 View Post
    hey KP i was recently given a tip to reduce my screenshots size almost ten fold in some instances and still have better quality captures too

    here is a guide.........it's dead easy
    basically Irafanview with PNGOUT plugin and reducing colours to 256 ^^^ image above would go down from 320Kb to around 40Kb

    just scroll down to SLI_dog's tips

    http://i4memory.com/showthread.php?t...ight=irfanview
    Take a long ass time to see my pics? really never gave it any thought dinos, maybe I should though if they are slow to load. I will check that for sure.

  19. #94
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    Quote Originally Posted by k|ngp|n View Post
    Take a long ass time to see my pics? really never gave it any thought dinos, maybe I should though if they are slow to load. I will check that for sure.
    not just slow to load but you know when you go on a benching spree and have lots of images might as well make them smaller....doesn't take longer and doesn't hurt either.............

    i'm pretty bad with posting shytloads of images and my forum pages are always set to view max amount of posts per view so i actually have to wait until it all loads even though the internet connections is pretty fast heh
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  20. #95
    I am Xtreme
    Join Date
    Aug 2003
    Posts
    7,825
    713 core stock is kick ass It's a shame these cards are so over priced Good job on the 1ghz core also!
    Phenom II 940 BE / ASUS M4A79 / HD5770 Crossfire
    3770mhz CPU 2600mhz NB | DDR1040 5-5-5-15 | 900/1250

  21. #96
    Xtreme X.I.P.
    Join Date
    Aug 2004
    Location
    Chile
    Posts
    4,151
    KP how are you handling shader clocks? are these higher than on GTX? or you have to underclock them to reach this core speed?

  22. #97
    Xtreme Recruit
    Join Date
    Nov 2002
    Posts
    95
    Quote Originally Posted by k|ngp|n View Post
    .............

    Well, one thing i noticed is that this new mem runs a little hotter than gtx, because i dont get as much frost forming around the mem chips like before. the card definitely requires good air circulation around it.
    So the problem is restricted only to the mem tems??
    Isn't the new Ultra heatsink better then the other GTX one??
    >> NEW "FLashRd ver.3.0 - FlashROM Disk for ATi Graphic Cards" <<
    >> Standard PC or Small Form Factor?? Well... SFF!! ...what a question.. <<

  23. #98
    Xtreme Member
    Join Date
    Mar 2005
    Location
    Portugal-Madeira Island
    Posts
    142
    remarkable scores, this is one hell of a card
    Core2 extreme QX9650 on Mach II GT
    Evga nforce 780i
    4GB Cellshock Micron D9
    BFG 9800Gx2
    Creative X-Fi elite pro whit Logitech Z5500
    Powered by Enermax 1kw
    Dell 2407WFP
    Lian li v2010
    wc project at full speed

  24. #99
    k|ngp|n/Sham my brothers
    Join Date
    Aug 2002
    Location
    Athens---Hellas
    Posts
    5,693
    I've insulated and tested under LN2 one of them.....The other one later on....



    INTEL PWA FOR EVER

    Dr. Who my arss...

    .........



  25. #100
    Xtreme Recruit
    Join Date
    May 2006
    Location
    Barcelona // Spain
    Posts
    94
    WoW, congrats man! this results are so tight!

    Thx for sharing, not the Ultra but next week i'll have the chance to test the evga 8800GTX ACS3, let's see the differences in between.
    IT= The never ending Story

Page 4 of 14 FirstFirst 1234567 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •