runnning 2050mhz at 1.6v
now the crappy part, running 2230mhz @ 1.775v
izzit a crappy cpu?
runnning 2050mhz at 1.6v
now the crappy part, running 2230mhz @ 1.775v
izzit a crappy cpu?
zzz
It's not terrible, but it's not great either, what motherboard are you using? If you are using an NF7-S then they have been known to undervolt, like mine, I'm running at 1.8 in the BIOS and it's actually 1.74 in MBM
oh yeah, and what cooling do you have? that can play a huge factor
AMD Phenom II 1090T @ 4GHz
MSI 890FXA-GD70
4GB G.Skill PI DDR3 1600 C6
OCZ Agility 2 60GB
Visiontek Radeon 5850
Antec Nine Hundred
Watercooling:
Enzotech Sapphire Rev.A
Swiftech MCW80 + 5850 heatsink
Swiftech MCP655
Swiftech MCR320
neop, welcome to Xtreme!
Less than a great one, that's for sure. Join the club - mine does 2200 at 1.8v
Epox 8RDA v1.1 | Athlon XP 2100+ AIUHB 0301 @ 2205 mhz (200x11) @ 1.8v | Radeon 9800 NP @ 378/324 | 2x256 MB of Corsair XMS PC3200 CAS2 | Maxtor 80gig 5400 HD | Linksys LNE100TX | SLK-800 w/42.5 cfm Sunon 80mm fan | Antec SX830 w/Antec SL400 PSU
not so great, but yeah.... you surely got your money's worth. When you think about it, AMD is spoiling us. A 2.4C still costs twice as much as these cpu's..... twice the performance? hell no.
If your goal is to be a top bencher, then maybe its worth it.
Doesn't sound terribly bad to me. Most I could get out of mine on air was 2300 at 1.85v. They don't mind voltage though so if your cooling is up to it try feeding it a bit more. You might get lucky.
E6600 @ 3.6ghz - Tuniq Tower / Asus P5B Deluxe / 2gb G-Skill HZ/ ATI 3870 / Silverstone OP650
2250 @ 1.6vcore here.
doesn't seem to want to run 2300 or higher no matter how much juice I give it.
It's on air, slk-900 w/ 68 cfm 92mm Panaflo
2.5 ghz 250 HTT
Winnie 0449 CHBBD MPM stock HSF 1.4v
9NDA3j rev 2.1 2/15/05 bios
2gb Corsair TwinX XMS @ 2.5-3-2-7, 2.6volts.
eVGA 6800GT @ 380/1.06 stock
Posting Permissions
Reply With Quote
Bookmarks