Quick test on new ATI new GC
http://forums.hardwarezone.com/showthread.php?t=1607936
3DMark and' insufficient by now it needs to see under the games to parity,' of bases as they involve the two cards.... he/she asks her and' how come you/they don't make to ever see a test under the same game, since do these seem truthful?? You excuse the possible erred translation...
P.(Italy)
e6400@3600mhz@Liquid by Air X-Force R1 Black|
Asus P5WDH vMCH & vdimm mod cooled by Lunasio Rv700 cromo|
2*1024 TeamExtreme 6400 4 4 4 8 D9 1000 mhz solid|
Ati X1900XT 512mb @Liquid by Lunasio 1250 EVO Black|
STAY COOL WITH CASE4LIQUID|
Tagan 580w U22|
Sata WD200|
TV LCD Samsung27" 1366*768|
wireless optical desktop|psc750|TRIBE
il 3DMark e' insufficiente dopo la storia dell' AA che perderebbe gia a 3x il 15% delle prestazioni, bisognerebbe vedere sotto lo stesso gioco a parità' di piattaforma e di impostazioni, come si comportano le due schede....
La domanda e' :come mai chi ha la scheda non fa mai vedere questo confronto almeno su un gioco ???
saluti
P.
Last edited by Parcher; 05-10-2007 at 06:09 AM.
^^ ARGH :O, I don't speak Italian!!!
FX8350 @ 4.0Ghz | 32GB @ DDR3-1200 4-4-4-12 | Asus 990FXA @ 1400Mhz | AMD HD5870 Eyefinity | XFX750W | 6 x 128GB Sandisk Extreme RAID0 @ Aerca 1882ix with 4GB DRAM
eXceed TJ07 worklog/build
3d mark is not enough because of the fact that the AA will make a loss of 15% overall performance, it is needed also to bench the same game with same platform and settings, to analyze how the two cards bench...
The question is: why who has this ''uknown'' card never shows this kind of camparizon between GPUs in one or more games?
That's how'd i translate it! Fear not non-italian-speaking users!
e6400@3600mhz@Liquid by Air X-Force R1 Black|
Asus P5WDH vMCH & vdimm mod cooled by Lunasio Rv700 cromo|
2*1024 TeamExtreme 6400 4 4 4 8 D9 1000 mhz solid|
Ati X1900XT 512mb @Liquid by Lunasio 1250 EVO Black|
STAY COOL WITH CASE4LIQUID|
Tagan 580w U22|
Sata WD200|
TV LCD Samsung27" 1366*768|
wireless optical desktop|psc750|TRIBE
http://forums.hardwarezone.com/showp...9&postcount=33ok dokey. upon request by many.......
compare the 8800GTS 640Mb from Leadtek as comparison.......
it's on the shelves here in malaysia
about lets see about usd 500
Anything new?
X6800 @ 2,93 GHz, Asus P5W-DH Deluxe and Radeon HD 2900 XT with default cooler:
3DMark06 stable 855/1030 MHz.
Next I'll switch to QX6700 and DFI's RD600 motherbard and DI is coming on Thursday.
Favourite game: 3DMark
Work: Muropaketti.com - Finnish hardware site
Views and opinions about IT industry: Twitter: sampsa_kurri
It will be interesting to see max result on air cooling. Also, if understand it correctly the GPU gets rather hot? I wonder how DI can handle that...
Thanks for sharing!
Favourite game: 3DMark
Work: Muropaketti.com - Finnish hardware site
Views and opinions about IT industry: Twitter: sampsa_kurri
Dammit, I just wanna see what's possible for 24/7 on decent water, including power figures.
165 @ 2.9 @ 1.45V | 2x1GB G.Skill HZ | NF4 Ultra-D
MSI X1900XTX | G500 21" Trinitron
X-Fi Fatality | Z-2300s | Little Dot MkIII | Beyerdynamic DT770 Pro
TDX | Maze4 GPU | DDC Topmodded | BIP3
Stacker STC-T01
Soooo now that the NDA is lifted, where is all the information?
Here we go, unfortunately this Thursday was public holiday here in Finland so I'll get dry ice next week:
According to AMD's document R600's recommended maximum operating temperature is 105 Celsius and 125 C is the absolute maximum. Beyond this ASIC will be damaged.
R600 XT GPU TDP is 160 watts and each memory chip two watts = total board TDP 225 watts
Shim is little bit higher than GPU itself so a friend of mine made 1 mm copper cold plate for better contact. Unfortunately shim is glued very tight around the R600 and very hard to remove with razor blade. G80's heat spreader is very nice feature when installing container.
Here is my aluminum solid container installed on Radeon HD 2900 XT. I modified heatsink from Radeon X1800 XT to PWM components.
Graphics card installed to test setup: QX6700, DFI RD600, pair of Corsair XMS6400-C3 and Enermax Galaxy 850 W.
Tests next week
Favourite game: 3DMark
Work: Muropaketti.com - Finnish hardware site
Views and opinions about IT industry: Twitter: sampsa_kurri
Seems like you're gonna have fun, looking forward for your results.
Sampsa--This may be a rather mundane question...
When using that copper coldplate, do you apply thermal material inbetween both contact areas of your block(s) or just inbetween the GPU/coldplate?
And for those of us who aren't machinists, where could we pick up a 1mm piece of copper like that? Lowe's or Home Depot, possibly? Does anyone know the exact specifications of the shim area?
Project:
[sigpic][/sigpic]
Bookmarks