I'm using P35-DS3L. Which BIOS version should i use for overclocking?
Sorted out my cycle ON/OFF/ON/OFF problem.
It was the webcam. When it was connected it caused that behaviour.
Weird huh?
#1 Core i5 2500K cooled by Corsair H100 / Gigabyte GA-Z77X-D3H / Corsair Vengeance LP 2x4GB DDR3 1600 / Gigabyte HD5850
#2 Pentium G850 / Intel DH61BE / Corsair XMS3 2GB DDR3 1333
hey i got a p35 ds3r, was there ever a fix for the "bios resetting on reboot" problem?
I had a 965 S3 before this one and got this one free months ago and switched to it.. for a few months it was ok cuz i was running default but now its really annoying when booting up. I shoulda kept teh 965 S3 as there was no problems/differences in performance..
Would a pencil volt mod help with the rebooting issue?
GA-P35-DQ6-F8
GA-P35T-DQ6-F6
GA-P35-DS4-F13
GA-P35-DS3P-F11
Easy Tune6 B8.0708.2
INFO
Last edited by stasio; 07-23-2008 at 02:12 AM.
Need a Gigabyte latest BIOS?
Z370 AORUS Gaming 7,
GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
Evga GTS 450 SC, Gigabyte Superb 720W
XSPC RayStorm D5 EX240 (Liquid Ultra)
NZXT Phantom 630 Ultra Tower
Win 7 SP1 x64;Win 10 x64
What's the range for the FSB wall on a P35-DS3R?
And is there any point in getting the new BIOS?
Now is official and on the Gigabyte site
Need a Gigabyte latest BIOS?
Z370 AORUS Gaming 7,
GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
Evga GTS 450 SC, Gigabyte Superb 720W
XSPC RayStorm D5 EX240 (Liquid Ultra)
NZXT Phantom 630 Ultra Tower
Win 7 SP1 x64;Win 10 x64
Any reason to get the new BIOS?
As per info:
1.Update CPU microcode(Wolfdale/Yorkfield) new E0-stepping
2.Fix S3 resume fail
3.Fix audio latency
Btw,waiting for new E8600 with E0 stepping
Need a Gigabyte latest BIOS?
Z370 AORUS Gaming 7,
GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
Evga GTS 450 SC, Gigabyte Superb 720W
XSPC RayStorm D5 EX240 (Liquid Ultra)
NZXT Phantom 630 Ultra Tower
Win 7 SP1 x64;Win 10 x64
im using a ds3r and wondering if anyone is using a gtx260 and notice any problems. Just wondering since the board is pcix 1.0 while the card is a pcix 2.0.
Buy my 74 Beetle.
http://www.thesamba.com/vw/classifie....php?id=895061
They just released a New f11 bios *final* for p35c-ds3r. has anybody tried it out? reviews? new features? comments? overclock any better? ram voltage any better? did they fix the automatic fan control mode selection? did they fix anything? stability?
Last edited by fausto412; 07-28-2008 at 05:35 PM. Reason: speeling
I'm not sure if this is the right thread, but I didn't see a more appropriate one.
The GA-EP35-DS3L just had the F5 bios released this month. It comes with a utility to flash from Windows, but it doesn't work on Vista 64-bit, so how would I flash to the new bios? I don't have a floppy drive. I want to do this because the F4 bios has a glitch with the voltages not sticking to any settings you pick.
CPU: E8400 @ 3.33GHz (Q815A077) 9x370MHz - 1.225V Bios / 1.184V CPU-Z
RAM: Mushkin HP2 4GB (2x2GB) DDR2 800MHz 5-4-4-12
GPU: VisionTek HD4870 512MB @ 790/1050
MOBO: GA-EP35-DS3L BIOS v.F4
Case: Antec 900
PSU: Antec EA-500D 500W
HDD: Seagate Barricuda 500GB 7200RPM SATA 32MB Cache
OS: Vista Ultimate SP1
is that the ga-p35-ds3r rev1.0??? i had that one and had to RMA it cause it wouldnt work with the E8400 cpu. i have the 2.0rev now and it works fine. temps are a little higher than others. i dont think these gigabyte boards are truely set up for the wolfdales...the P45 chipsets are out and i think they(gigabyte) has done a good job with them for the wolfdales.
revision 3.3? ive heard of 2.1 but not that one. night have to look into it
this is all assumeing you are talking about the DS3R board...lol
GA-EP45-UD3P 1.6rev
Q9550 @ 3.77ghz SLB8V
1.325vcore in bios
Batch #L846B715
Kingston HyperX KHX8500D2K2/4G @1066
OCZ Vendetta 2 with 120mm fan
Corsair HX650w PSU with a 120mm fan
PNY 8800GTS
HAF 922 2 200mm red led fans 1 200mm black fan 1 120mm rear fan
Q6600@3.6 GHz / GA-X48-DQ6
2x2GB Kingston HyperX DDR2-800
Asus HD 5870
Corsair TX-850
WD Velociraptor 150GB / WD Green power 500GB
Water Cooling: EK res 250 > Swiftec MCP655 > Swiftec MCR320 > EK-FC5870 > HeatKiller 3.0 LT
I guess I finally have to get myself a USB drive, I've managed to avoid it for years because I never really "needed" one. Any good guides on how to do the Qflash? I downloaded the .exe from Gigabyte that extracts an ep35ds3l.f5 file, as well as an autoexec.bat and FLASHPI.exe, but FLASHPI won't work in Vista 64.
What do I put on the USB key? the ep35ds3l.f5 file I assume.
Last edited by HamTard; 07-29-2008 at 08:41 AM.
CPU: E8400 @ 3.33GHz (Q815A077) 9x370MHz - 1.225V Bios / 1.184V CPU-Z
RAM: Mushkin HP2 4GB (2x2GB) DDR2 800MHz 5-4-4-12
GPU: VisionTek HD4870 512MB @ 790/1050
MOBO: GA-EP35-DS3L BIOS v.F4
Case: Antec 900
PSU: Antec EA-500D 500W
HDD: Seagate Barricuda 500GB 7200RPM SATA 32MB Cache
OS: Vista Ultimate SP1
Use the guide from Gigabyte....Search is your friend....
http://www.gigabyte.com.tw/FileList/...ios_qflash.pdf
save the exe file you downloaded from Gigabyte on to your usb thumb drive. restart your pc and go into your mobo bios. follow that link I gave you on how to flash with QFlash. It's not difficult.
p.s. after you're done flashing the bios restart the pc and then go back into the bios and load fail safe settings and reboot pc.
CM ELITE 310 w/Yate Loon, Scythe & Antec Tricool Fans
AMD 630 Propus Quad @ 3.50ghz
Gigabyte GA-770TA-UD3 Motherboard
Mushkin 4gb (2x2gb) DDR3-1600 Ram
CM Hyper 212 PLus Cpu cooler w/Scythe S-Flex "G" &"G" fans
CM 590 w/Yate Loons, Antec Tricool & Scythe Fans
Q9550 @3.66ghz
Gigabyte UD3P Motherboard
Mushkin 4gb (2x2gb) DDR2-1066 Ram
CM Hyper 212 Cpu cooler w/stock fan & Scythe S-Flex "F" fan
Anybody have any experience with the overclocking/control software that Gigabyte uses if the temps are accurate or the overclocking feature works or not.
Just got my GA-P35-S3G going and wondering if i should monkey with it or not.
Intel C2D E8500 - Gigabyte EP35-DS3R - Xigmatek HDT-S1283 - 2GB Crucial Ballistix PC2-8500 - XFX 8800GTS Extreme 640 - Audigy XFi Extreme Gamer
1 x Seagate SATA 320GB 1 x Western Digital SATA 200GB - Thermaltake Toughpower 750W - Antec 900
Here is a good link to a "Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide" from Tweaktown: http://forums.tweaktown.com/f69/giga...g-guide-26112/
I got a pile of good information when I bought my EP35-DS3R. Coming from ASUS, the Gigabyte BIOS was a bit confusing.
Intel C2D E8500 - Gigabyte EP35-DS3R - Xigmatek HDT-S1283 - 2GB Crucial Ballistix PC2-8500 - XFX 8800GTS Extreme 640 - Audigy XFi Extreme Gamer
1 x Seagate SATA 320GB 1 x Western Digital SATA 200GB - Thermaltake Toughpower 750W - Antec 900
The bios seems pretty straightforward but i did try the auto settings and noticed my voltages set way too high i guess i wont be using that anymore.
Also i had problems with the bios resetting itself during bootup maybe there another bios i can use ?
Everything else seems to be working ok just too bad i could not afford a little better model im worried about the lack of heatsinks on this thing.
Gigabyte @BIOS v2.02
HERE
Need a Gigabyte latest BIOS?
Z370 AORUS Gaming 7,
GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
Evga GTS 450 SC, Gigabyte Superb 720W
XSPC RayStorm D5 EX240 (Liquid Ultra)
NZXT Phantom 630 Ultra Tower
Win 7 SP1 x64;Win 10 x64
Bookmarks