The 500MHz+ CAS 3 Club

[Omastar]

Here's a good question.

Is anyone brave enough 2 use these timings and voltage 24/7.

Nah, if anyone's that stupid, they deserve the day or so their sticks might last. This is suicide shots only.

[Kabauterman]

Teams with 8 layer PCB are dying So it doesn't work in every case

the Teams have 8-layers?

thats bad, how do you cool the Chips?

I use Dominator Airflox for "normal" OC and 14cm Fan with 150m³/h for more than 2,8 V

[Xtreme Addict]

In r00n's ramlist there is signature, that it is 8 layer PCB

I cooled it with either Revoltec Airguard 120MM (12v) & Titan 80MM (12v) (almost the same as DELTA ) or original (thermalright heatsinks) with Titan 80MM @ 12v

[danny_discus]

I made it to the 500MHz Club!

Hardware:
P5B Deluxe
Two Sticks of Buffalo Firestix FSX1000D2C-1G (D9GKX)

Voltages:
NB - 1.8v
RAM - 3.0v

Timings:
3-3-3-8

Validation:
http://valid.x86-secret.com/show_oc?id=202177

Screenshot:

[bachus_anonym]

hmmm, am i the only one with 500mhz cas3 on AM2?
http://valid.x86-secret.com/show_oc?id=187851

... just so you don't feel lonely there, ozzi, I dug out the result of my battle with M2N-SLI from last summer

Corsair TWIN2X2048-6400C3 @ 2.90v .:. CPU-Z Validation @ 506MHz 3-3-3-8 .:. SPi32M @ 484MHz 3-3-3-8

I definetely need to get those 965P/P35 CAS3 results going, though...

[clon22]

Can I join?
One of the local Distributors sent me a P35 board to test.
So i decided to take out my old Corsair C3s to test.
No memset to tweak the timings.
All booted from bios.

Spi1m @ 2.7v 3-4-3-9-(25-8-9-8-9)




Spi32m @ 2.9v 3-4-3-9-(25-8-9-8-9)




Validation :




3-3-3-9 couldn't run 32mil so i gave up.
I was afraid i killed my rams.
(I kill 1pair and corsair replaced me with a 8500c5 v1.3 )

[Sabuy-Sabuy]

ASUS M2N-E nForce 570
Kingston KVR800 D9GKX Vidimm Mod@2.9v
540 CL3
Bios Boot

CPU-Z Database 540 CL3

[Florent]

For the 500MHz+ CAS 3 Club


http://valid.x86-secret.com/show_oc.php?id=202600
With 3,3V

[Viss]

Very nice 552mhz is crazy Florent. This is mine, vdimm 2.525 bios:

[M.Beier]

I have some other Kits here,

Dominator 8500 CL5 and Mushkin XP2-8500 both with D9GMH
but they don't wan't to reach the Clocks of my lovly G.Skill 8000 HZ with D9GKX

@ all the Voltage lovers:

Pls don't give more than 3V on a 6-layer PCB this is the death for the Chips
on 8-layer you can go to 3,2+ with good airflow.

Hmm...
Im about to test my pair of 8000HZ this weekend, are you sure of this matter..? I've been informed with good airflow 3,2V wouldnt be the certain death, for benching ofcause..
- Gonna test 'em as soon as I get my Xeon3060... - I'm gonna curse to billy high heaven if I dont enter this club

[Hutch]

ASUS M2N-E nForce 570
Kingston KVR800 D9GKX Vidimm Mod@2.9v
540 CL3

CPU-Z Database 540 CL3

coolaler?

[fireice2]

man, there are extreme v's!

[memory]

502mhz @ 3-3-3-9 @ 3.28vdimm. Direct boot from bios and load into windows

Mobo: DFI Infinity Dark-S(Beta Bios: 5/31/07)
Memory is OCZ HRC Reaper Series 1gb x 2 kit in dual channel

[Florent]

Mobo: DFI Infinity Dark-S(Beta Bios: 5/31/07)

Are you sure ?
On the screens, it's marked 4/24/07

[oanvoanc]

hi
i got it!

500mhz cl3-3-3-9 on an asus commando i965.

memory:
2x512
kingston hyperx 9600 cl5

bios set:

divider: 9
fsb: 334
vdimm: 3,025v
fsb-voltage: auto
nb vcore: auto
ddr2 controller ref voltage: +10mv

bios: 0601 (dont know, if its good or not.... )

its just stable for cpu-z validation.
not stable for superpi

validation:
http://valid.x86-secret.com/show_oc.php?id=205236

pic:

[memory]

Are you sure ?
On the screens, it's marked 4/24/07

It is actually mod Bios dated 5/31/07 base on official 4/24/07 bios

[marcolecorse]

[Florent]

It is actually mod Bios dated 5/31/07 base on official 4/24/07 bios

Bios Mod by who ?

Link ?

Thanks

[v|aDy]

Hi guys!

Memory:
2*512 Mb SpecTek PC4300 remarked D9GCT
Biostar TForce P965 VDimm/VCore mod
VDimm DMM 3.16v
Timings: 3-4-4-9 2T
Cooling: Mobile Air Condition +16'C
530 MHz 8M Stable



CPU-Z Validation
540MHz
http://valid.x86-secret.com/show_oc?id=206198

[v|aDy]

555.4 MHz Cl3 Done!

vDimm 3.42v

http://valid.x86-secret.com/show_oc?id=206212



Sticks is dead

[luihed]

Nice Vlady.... Is that the WR? That 530fsb 8M stable is just sick dude....

Here's mine, single channel only cos the other stick is a dud..... Straight from bios, could probably gone higher but didnt wanna stay too long at this voltage (2.95v)....

Validation

[Xtreme Addict]

555.4 MHz Cl3 Done!

vDimm 3.42v

http://valid.x86-secret.com/show_oc?id=206212



Sticks is dead

I had Biostar when he came out and there was problem - when I set CAS4 in bios, everything showed me CAS3... but it was actually CAS4. Mind it And CAS=3 wasn't working at all

[v|aDy]

I had Biostar when he came out and there was problem - when I set CAS4 in bios, everything showed me CAS3... but it was actually CAS4. Mind it And CAS=3 wasn't working at all

May be, but this result was get with bios set cl to 3 I don't no 3 or 4 was actually in my result . Sticks is dead and I don't repeat this result

[Xtreme Addict]

Maybe it was old bios issue, but CL3 wasn't working at all

[v|aDy]

Yesterday I update bios to 601 and went to take max frequency with CL3