New E6600 batches, post your Overclock

[andressergio]

Hi all !!

I made 3,6Ghz / 800 4-4-4-12 stable OCCT + ORTHOS 30 min both running at same time and 8 hours ORTHOS

400x9
vcore 1,4875
vdimm 2V
mch 1,65

http://www.subirimagenes.com/imagen-de-3-1306424.html

Best regards for all !!
Sergio

[sreedx2]

Hi all !!

I made 3,6Ghz / 800 4-4-4-12 stable OCCT + ORTHOS 30 min both running at same time and 8 hours ORTHOS

400x9
vcore 1,4875
vdimm 2V
mch 1,65

http://www.subirimagenes.com/imagen-de-3-1306424.html

Best regards for all !!
Sergio

ah good info, I have same CPU #

btw I added you

I will be OC'ing once again, soon as my new ballistix arrive

[road-runner]

Got a L630F that was running 3825 stable on 1.55 setting in the bios with water cooling.

[Lafas1987]

I overcloced my system a little but i can't more... Could you help me?


3dmark2006






3dmark2005

[Garrett]

Seems Russian... I don't think many of us can read that

[Bei Fei]

I just recieved a new E6600 B# 3726A777. so far 3.6 @1.40V, 3.7@1.43, im gonna see what i can do with 1.55 im shooting for 4. I will post results soon.

[nugzo]

I just recieved a new E6600 B# 3726A777. so far 3.6 @1.40V, 3.7@1.43, im gonna see what i can do with 1.55 im shooting for 4. I will post results soon.

lucky 7's

[mcaff]

E6600 (9*350MHz) 3,15GHz 1,55V inbox, L701C327, wall 395MHz

[Bei Fei]

UPDATE

The chip will boot @ 3.85 1.55, since I am on air I don't want to push the voltage. I dare 1.55 because my temps only get in the high 50's sometimes 60~61 for a few seconds. I was able to get 3.7 @ 1.45 for 3 hours before I called it a night. With the right cooling this chip could have more potential.

I had to RMA my second ultra yesterday because it would artifact after 30 min of CS:S @ stock. So my GTS is back in action, hopefully both my ultras will be back within 2 weeks for some serious fun.

I will push this chip until my Q arrives...... need to get my 2 old 6600's sold first. Thank god for EBAY.

[doakh]

I don't know what my batch is. I lapped it and forgot to look. I bought it from Newegg at the end of March if thats helps. I have been able to get 3.8GHz into windows but it is not stable. I am leery of increasing the voltage any further. I cannot get 500 FSB x 7 to post. Any thoughts. Right now I am at 400 x 9 at 1.5125v (1.50v actual). In Orthos #9 my temps are ~ 65....67C.



Asus P5B Deluxe (Bios 1212) || C2D E6000@3.6Ghz || Scythe Ninja Rev. B || G.Skill 4x1GB F2-6400PHU2-2GBHZ@800Mhz 4-4-4-12 || Sapphire X1950Pro with Zalman VF900 || Samsung Spinpoint T 320GB || Antec P182 || Antec Neo HE 550W || Vista x64

[Kain XS]

Anyone with L740A batch?

[pH(x)]

I have lapped mine (L632B) from ebay to 15 micron. I will post results watercooled under a D-Tek Fuzion on a Intel X975XBX2. As soon as I can get enough money to order more Tygon 3603 (to hook up my Swiftech MCW60 and lucite reservoir as well).

[marauder16]

I got mine up to 3.7GHz 1.526V (orthos blend load), but it seems my storm isn't doing well, 63C max load with ambient around 15C is not even good, seems I'm up for a D-Tek Fusion next cause I really expect better temps know (especially after reading the first page here)

[Leeghoofd]

I don't know what my batch is. I lapped it and forgot to look. I bought it from Newegg at the end of March if thats helps. I have been able to get 3.8GHz into windows but it is not stable. I am leery of increasing the voltage any further. I cannot get 500 FSB x 7 to post. Any thoughts. Right now I am at 400 x 9 at 1.5125v (1.50v actual). In Orthos #9 my temps are ~ 65....67C.

week/Bath is also on the box mate FPO that's it

[doakh]

week/Bath is also on the box mate FPO that's it

Thanks, I found the box.......My FPO/BATCH# L644G231. Is this a good batch?

I am now running the following as my experiment continues.

Asus P5B Deluxe
E6600 @ 3.40 Ghz.....377x9
4x1GB G.Skill 6400 HZ (4:5) 471Mhz 4-4-4-12
vMem: 2.25
vCore: 1.40

This is 9% faster in Super PI 32M than 400x9 (1:1)

[doakh]

Does anyone have any idea what the maximum voltage for 24/7 use. I noticed Intel has changed their 'Thermal Specification from 1.35v to 1.5v.

http://processorfinder.intel.com/det...px?sSpec=SL9ZL

[AlphaHeX]

I'm using 1.58V set in Bios, which is 1.51V real and everything is working fine since May 2007. If the chip will fail I will RMA it and will get the new one (I have 3 years warranty) or even exchange it for Q6600 G0 Basically if you are going to use your processor for more that 3 years keep the voltage in line with Intel specification

[memory]

Anybody has oc results on E6600 L652B260?