New E6600 batches, post your Overclock

[Xfree_[ITA]]

L702C486, how it is this batch?
I'd never seen anyone like this..
Oh..it's an E6600..

[japgar]

Anyone think my temps are to much for stock cooler?

[nealh]

L702C486, how it is this batch?
I'd never seen anyone like this..
Oh..it's an E6600..

where did you get the chip from

I have seen several nice L7xx OCs

[Xfree_[ITA]]

where did you get the chip from

I have seen several nice L7xx OCs

I didn't bought yet..but from a friend of mine.
My question is :
It overclocks well?
Max stable frequency with vcore?
Tell me your experience with these batch.
I'm interested to daily use, not kill shot.

[nealh]

I didn't bought yet..but from a friend of mine.
My question is :
It overclocks well?
Max stable frequency with vcore?
Tell me your experience with these batch.
I'm interested to daily use, not kill shot.

I saw it posted here all I got is avg..L628A in my sig

[sreedx2]

I didn't bought yet..but from a friend of mine.
My question is :
It overclocks well?
Max stable frequency with vcore?
Tell me your experience with these batch.
I'm interested to daily use, not kill shot.

If you get this CPU please post results, my L709A442 is at 3.5ghz with 1.42v loaded

I have have not seen any C results ?

[sreedx2]

what voltage does 3.6 take you sreed? have you tried for more?

Well if you read my earlier post I was stable at 3.6ghz with 1.48v loaded but for some reason I am not now, I have proof did you see my screenie

Pisses me off I am not stable at that speed, I tried upping the Vcore couple notches but nothing so now I am at 3.5ghz

[sreedx2]

Here are some new screen shots of my OC

Superpi at 390 FSB

My stable OC at 389 FSB, forgot to take a pic of superpi at 389

How can I get 13m ?

[Xfree_[ITA]]

If you get this CPU please post results, my L709A442 is at 3.5ghz with 1.42v loaded

I have have not seen any C results ?

The temps are high? I've seen some L702 E4300 that gets insane temps...
You have also liquid cooling, instead i have a Scythe Infinity..

[Kristoferr]

I ran my friends new CPU yesterday... its really sucks.
3600mhz with 1,6V stable
Only 3200mhz with stock volts.

Cpu was week44 B2

Even my 2times cheaper E4300 does better.

3250mhz with stock volts and 1,55V to get 3600mhz
Max on my E4300 is 3900mhz with 1,7V

[demenion]

Do these temps seem right to you?

1.43-1.45V 400x9

32C idle / 65C full load?

do you think its just bad contact or does it seem normal to have it jump that high?

I am using air cooling w/ a scythe infinity.

[dnottis]

I've just recently had 2 x 6420s and now a 6600 and none of them will run 3.6 Ghz Orthos stable. These latest chips are a disappointment to say the least. Even water cooled and up to 1.65v - 3.6 is a no go, it's stable and will run super pi but it's not stable enough for orthos.

[dnottis]

when i get my E6600 soon, you think i should take a chance on the Egg, or just ask a shotload of questions about batch # on ebay?

I would buy one that has been overclocked and tested here on the forums.

[nealh]

well crap..I think I needed 2 e6600 so I figure one from newegg and one from ZZF

Newegg is shipping it to FL from thr dreaded TN warehouse...NOOOOOOOOOO..that means a 44G???

[dnottis]

well crap..I think I needed 2 e6600 so I figure one from newegg and one from ZZF

Newegg is shipping it to FL from thr dreaded TN warehouse...NOOOOOOOOOO..that means a 44G???

mine was 47g, who knows.

[nealh]

mine was 47g, who knows.

was your from TN or NJ warehouse

[dnottis]

was your from TN or NJ warehouse

It might have been my first 6420 that was from TN, in any case neither of the 2 6420's nor the 6600 can run 6600 orthos stable.

[Sinnerman49]

Wow, this thread is really making my decision about a E6600 or a lower model hard.

[P§I]

when i get my E6600 soon, you think i should take a chance on the Egg, or just ask a shotload of questions about batch # on ebay?

I myself have been asking alot of retailers on ebay, most have the F series i believe their was a few that had some of the L7xxC batches. Half of them dont know what the number is, then 1/4 of them dropship them and have no clue. Your best thing is to get on that is know to be a good chip.I hear tank guys going to get some of the older chips like l628b or something along the lines of that. But not sure what the price will be. It will be more then $230 though. Good luck

[dnottis]

I myself have been asking alot of retailers on ebay, most have the F series i believe their was a few that had some of the L7xxC batches. Half of them dont know what the number is, then 1/4 of them dropship them and have no clue. Your best thing is to get on that is know to be a good chip.I hear tank guys going to get some of the older chips like l628b or something along the lines of that. But not sure what the price will be. It will be more then $230 though. Good luck

tankguys had L629F - but they are sold out, waiting on the next batch, no idea what it might be...

[nugzo]

tankguys had L629F - but they are sold out, waiting on the next batch, no idea what it might be...

I would definately go with L629F if you can find one. Mine does 3800 @ 1.46 Loaded. It does run a little warm though 60-66 while priming. Most of the others i've seen do atleast 3800. A few are @ 4ghz. http://www.xtremesystems.org/forums/...ighlight=l629f

[Xfree_[ITA]]

So definitively, does L70X batch overclocks well?

[nealh]

Ok.
I live in FL
Newegg shipped from TN
ZZF shipped from CA(according to Fedex)
I will have ZZF on Fri and possible Newegg's as well

[sofarfrome]

I would definately go with L629F if you can find one. Mine does 3800 @ 1.46 Loaded. It does run a little warm though 60-66 while priming. Most of the others i've seen do atleast 3800. A few are @ 4ghz. http://www.xtremesystems.org/forums/...ighlight=l629f

I got the last one tankguys had and should be here tomorrow. I am hoping to get one of the L629Bs that they have coming in also tomorrow.

[sofarfrome]

might be worth a try for those that are fed up with what is shipping right now

http://www.ocxtreme.org/forumenus/showthread.php?t=629