New E6600 batches, post your Overclock

[sreedx2]

anyone with a newer Conroe batch please post your Overclock, voltage under load and batch please

[GAR]

newer batches have been bad for me, other people have had good ones, but most are bad.

[keldererik]

So, from when is it called a new batch? a little more specific plz

[sreedx2]

Well I don`t know anything over 35 maybe .. my brother`s 32 is good but I do not know when they started getting worse

[largon]

E6600 L636A229:

3.5GHz @ 1.413V ORTHOS 10h+ @ 52ºC.
3.6GHz @ 1.47V ORTHOS 8h+ @ 58ºC.
Watercooling.

vCore measured with DMM.

[Infa]

E6600 L644G280

3.8ghz @ 1.60 (Vdroop) 51c
4.0ghz @ 1.70 (vdroop) not stable at all

think maximum is somewhere between 3.8 - 3.9 ghz

all is on watercooling, i will by a Striker board soon and will see how it works on that, with some more vcore!

[largon]

Infa,
I assume that 51ºC @ 3.8ghz 1.6v is an idle temp?

[Infa]

Infa,
I assume that 51ºC @ 3.8ghz 1.6v is an idle temp?

Nope, thats under hours of Orthos , iam Idleing around 20c

regards

[XenatR]

my new E6300 is pretty bad. cant really get more than 2.91

[largon]

That's very impressive temps you got there.
What's your ambient?

You using Coretemp or what for the temp readings?

[RealTelstar]

The "G" batches seem to be very good

[[XC] 4X4N]

You must be running in 10c ambient and have ice water in your loop for those temps with 1.6 vcore.

[largon]

[XC] 4X4N,
OR he's using an inaccurate temp monitor software.

[Getttosmurf]

nah 1.6v 50c load seems right on the spot with good watercooling gear.
Im running 1.655v and idle around 36/40 core1/core2 (coretemp or intel tat)
with load @ 55-58c this with fairly low ambients though 19-20c running dual sp2004 blend prio 9 or 100% load with intel tat for 12hours+
wc gear in sig

[mascaras]

nah 1.6v 50c load seems right on the spot with good watercooling gear.
Im running 1.655v and idle around 36/40 core1/core2 (coretemp or intel tat)
with load @ 55-58c this with fairly low ambients though 19-20c running dual sp2004 blend prio 9 or 100% load with intel tat for 12hours+
wc gear in sig

yep , my E6600 L628B (B = HOT) with 130€uros watercooling Kit


E6600@ 3600mhz --- Temps FULL







Ontopic: anyone already tested a L639F ????



regards

[Getttosmurf]

largon vcore.dk has the d-tek fuzion a little closer to where you live = ) about 100$ though

[redrol]

L64F040 SL9ZL Malay from newegg about 2 weeks old

about 3.2ghz max with 1.5v vcore (ty)

[|2ed |ey]

L64F040 SL9ZL Malay from newegg about 2 weeks old

about 3.2ghz max with 1.5v vcore (ty)

Yah, got a L629F which I purchased 2weeks ago will only do 3.45ghz at bios vcore 1.55v. This is the oldest batch that I can find and it still turns out bad.
The rest are batches starting with 7.

Think the 'F' are really FFFFFF

[sreedx2]

Yah, got a L629F which I purchased 2weeks ago will only do 3.45ghz at bios vcore 1.55v. This is the oldest batch that I can find and it still turns out bad.
The rest are batches starting with 7.

Think the 'F' are really FFFFFF

well my 29B is not that great 3.2ghz 1.41v loaded

Yeah it is going to be a crapshoot for me ... just randomly buy a cpu and hope it clocks well lol

[pss75]

I broke the good e6600 in my sig while removing the IHS, just got this, 7638A760 and it does 3600 at 1.46vcore (bios). temps are good, idles 25 deg and 40 load

[CrimInalA]

I recently bought a xeon 3060 . The batch number if i recall right is 7640A .
I really had a hard time finding a stable OC . and with stable i mean stable .
Lots of times i've seen orthos small fft crash after 12 -16h or more .
I can post at very high frequencies (3.9ghz) with a 'passive' cooled scythe ninja . The cpu never reboots or blue screens and almost always posts . but to get it orthos stable is just not possible and requires crazy voltages .
I'm now at 3290mhz (470x7) with 1.4 in bios . (1.329 load)
the board is a DS3 rev 3.3 .
anyway , to get like lets say 100-200mhz more out of it , i have to up voltage to 1.5 in bios . and even then it will error after 15+ hours orthos .
really hard to find a stable freq .

my E6300 L629B was alot easier and did 3430 mhz with 1.475 in bios (1.39 load). when it wasn't stable it would just blue screen/reboot or not post at all .

[Infa]

yeeep, iam having good gear, look at my sign.
and no , not faulty monitoring programs, iam using Coretemp 0.95 (latest)
and TAT and everest, tat is showing a TAD bit higher temps, but also lower LOAD temps, soo iam just trusting coretemp. and idle is at TOTAL idle 20c, and surfing and usual use its about 25.

my ambient is 20c soo .. and its lapped, dont think it did so much..but anyway cant hurt

but i want to get higher, can boot and load windows at 4ghz, but it needs more vcore! and p5b is not giving any more than 1.7....soo striker is coming up!

Regards

[elsupremo]

Wow, very nice temps and overclock Infa. It would be amazing if you could hit over 4.0 on the Striker with your setup.

[Tuppen^^]

Hmm.. I got a week 32 chip, so I don't know.. :P
Hasn't Intel made any in 2007? If they have made E6600 chips will the stepping then be L7xxx?

[cblguy]

Hmm.. I got a week 32 chip, so I don't know.. :P
Hasn't Intel made any in 2007? If they have made E6600 chips will the stepping then be L7xxx?

There are some of us with L707A e6600 chips. I have one. I'm at 3.013 GHz, 1.41 volts. I had to start upping voltage from stock to be stable at 2.8 GHz. I'm not going for big overclocks though, just a stable "daily driver".