Trying to get some serious cooling going here, got a few questions.

[m0tion]

Ok, lemme just break it down for you. Here is the setup I'm going to be using:

2 Dtek Heatercores
Eheim 1250
Custom Res
Undecided block for CPU
226W peltier powered by Meanwell S-350-13.5

Ok, so here are my questions. First off, is this a good order to have the system flow?

Res -> Heater Cores -> Block -> Pump -> Res

Second questions is, should I run the rads in series or parallel?

Third questions is, if I add a GPU block with an 80W peltier to the mix, is this a good order to have the system flow?

Res -> Heater Cores -> Block -> GPU -> Pump -> Res



Thanks! =)

[gone_fishin]

You posted Res -> Heater Cores -> Block -> Pump -> Res


either pump > block > res > rad > pump

or pump > rad > block > res > pump

Don't pump directly into the res first and don't put the pump suction to the block (which is usually the most restrictive part in the loop).