New OCZ PC2-6400 Flex XLC CAS 3

[RyderOCZ]

I just received my new 6400 Flex CAS 3 sticks, thought I would show them off a little bit

With the move to more and more ram, I figured I would start out with a 4GB config and move on from there.

EVGA 680i with P24 Bios.
Core 2 Duo E6400
OCZ EVOStream 600W
BBATI X1900XT
4GB of OCZ PC2-6400 Flex XLC CAS 3

Shots of the ram installed




Nothing fancy here just stock ram speed and timings, I will post some quick and dirty overclocking before I retire.



Bios shots:

[erwinz]

very nice rams.. any oc reports..

thanks for sharing..

[nn_step]

ooh, so when are the 3-3-3 sticks coming out?

[Revv23]

sexy, need to get you some WC now.

[Omastar]

No fan over the RAM? And that 15 tRAS is kinda depressing. Can you not go any lower with 4x1GB?

[RyderOCZ]

No fan over the RAM? And that 15 tRAS is kinda depressing. Can you not go any lower with 4x1GB?

Not while I am trying to show pictures of the ram. When its running? Yes there is a fan over it.

Stock speeds, mate, stock speeds I will get to the overclocked part.

ooh, so when are the 3-3-3 sticks coming out?

At the same time



2.4V is rated for CAS 3 operation, the above was done with 2.3V set in the bios.

[RyderOCZ]

Last one before bed, top speed so far with 2.15V set in bios, yes I know...I covered up the checksum, its not a WR

Trfc is not available in the bios, so that huge number is what the board picks. It got late on me tonight, so no time to tweak everything down, but I did manage to get the subtimings a lot tighter than what the board wanted to set.

Defaults were:
Trc = 26
Twr = 6
Twtr = 11
Trrd = 5

[erwinz]

very nice for a 4gig setup.. push it more please..

[nn_step]

Not while I am trying to show pictures of the ram. When its running? Yes there is a fan over it.

Stock speeds, mate, stock speeds I will get to the overclocked part.



At the same time



2.4V is rated for CAS 3 operation, the above was done with 2.3V set in the bios.

ooh god yes

[RyderOCZ]

Update to post 7, started Orthos before I went to bed, just adding that those settings are pretty stable.



BIOS Shots:

[Shaolin3a]

Wow, nice ram! 490mhz @ 4-4-4-x and only 2.15v?!

[Scyth3]

[fhpchris]

I assume these will be affordable? For 200-300$ they would not be bad

[kemo]

I assume these will be affordable? For 200-300$ they would not be bad

i am guessing between 320-350$

[californian7856]

cool but ur 8500 SLI EPP can do this:

http://i121.photobucket.com/albums/o...2/Shot0054.jpg

DDR2 830 3-3-3-2 1T 2.35v... with 2 sticks though, im sure its harder to OC at 4 sticks

sub timing can be lowered to 1-20-2-6-2-3.9 for benching 3dmark, pi 32m, but i just use 1-44-3-6-3 for 24/7


is it this one:
http://www.ocztechnology.com/product...lexxlc_edition

3-4-4-15 stock

[RyderOCZ]

Yes, a lot of Micron can do that....but this is not Micron

[californian7856]

ahh, but the heatsink looks cool though,

hey btw can u OC higher with watercooling than air?? how much higher??

[kemo]

Yes, a lot of Micron can do that....but this is not Micron

Can you tell us what is it ? , Cheaper or more expensive than Micron ? , ,single or double sided ?

[Shaolin3a]

Yes, a lot of Micron can do that....but this is not Micron

Now this one is interesting! Something we've never seen before?

[ZoLKoRn]

it cool ! for 4 sticks and i like heat spreader

ps. what is u power supply ?

[erwinz]

Yes, a lot of Micron can do that....but this is not Micron

this is interesting..

mm.. my guess.. promos??

very nice rams..

[RyderOCZ]

Small update, wanted to show a little more stability at DDR2-1000 at 4-4-4 timings, my last post was at 491 4-4-4, just a touch more voltage and we have 500 at 4-4-4 timings.

EDIT: Vid cards are 7800GT in SLI, btw.

2.2V set in bios:

[zitmatt]

compliment...
which has been the maximum stable reached frequency to SP since 1mb???

[skate2snow]

Hey Ryder,

What are their Reaction to voltage? And Temperature? And is your pair hand-picked? (I suppose not though)

Thanks

[metro.cl]

Can you tell us what is it ? , Cheaper or more expensive than Micron ? , ,single or double sided ?

hynix is my bet