What voltage 2200 T-bred without overheating?

**xgman** · 06-26-2002 06:59 AM

With only a swiftech mx462 air, what is the highest voltage that you guys would reccommend using for the 2200 without making too much heat the probem?

**Mentaly** · 06-26-2002 07:10 AM

Hi Xg

Well try it out some different voltages, and use a software prog to monitor your temps in Windoze, that way U can see when your temps are beginning to be at max. Hope this helps U some

**MrIcee** · 06-26-2002 10:34 AM

Boy...I tell ya...the small surface area on these thoroughbreds radiates some intense heat...even my -35c chiller can only get my cpu to -5c or so..as compared to my AGOIA 1700+ which at the same 1.95V was running -10c at idle. I'd guess probably 1.8 to 1.85v would be tops on air and not jeopardizing anything....but please play it by ear..adjust it up only as needed and monitor your temps closely with Motherboard Monitor or an equivilant.

Randi

**xgman** · 06-26-2002 11:17 AM

thanks, I think I only have it at 1.7 or 1.75 and it is a s hot as my 2100 at 1.85 or 1.9 so maybe for us air guys something like this http://www.hardwarezone.com/articles...aid=446&page=6 - will eventually help.

**Blood666** · 08-01-2002 07:05 AM

My 2200+ with volcano9 and Artic Silver 3 without oc is already at 71Â°C at idle

**Keeper** · 08-01-2002 07:51 AM

That's cooking, I have a Swiftech MX462 and under heavy load have not topped 48C, and I am OC @ 1930. I ordered a Tornado 84CFM fan to see if I can drop those temps to get some more clock speed and still be able to sleep. What kind of case temps do you have, 71 sounds unhealthy to me.

**Blood666** · 08-01-2002 07:56 AM

My mobo is at 40Â°C it's a gigabyte GA-7VRXP.
I also touched the fan on heavy load it didn't seem very hot in my opinion. On the other hand i know that my mobo sensor are ok.
I'll soon receive a new termalright vx7 with a 80mm on it .. wait and see.

**Blood666** · 08-02-2002 12:46 AM

Problem solved ... How stupid i am

Hardass · 08-02-2002 02:31 AM

Share what you found, for the next guy!

**Blood666** · 08-02-2002 03:18 AM

I was sure you'll ask and shame on me : problem was that i plugged my fan in the wrong side.
Curiously i could plug it without any "visible" difference, but after plugging it in the correct side i lost 20Â°C so now i'm really at 1800Mhz and my temp is around 49Â°C at idle and around 53 fully loaded.

**xgman** · 08-03-2002 02:49 PM

I seem to hover bewteen 50-60 degrees, (and that is wit the SLK-800 and Delta80) but all is stable, so I guess the 200 can take more heat than the XP.

**majormav** · 08-04-2002 11:43 AM

they sure do pump some heat ... mine is at 22 idle and 24.5 stressed at 2100mhz 1.775v thats with 156w pelt and 18deg C water only got it yesterday so it aint burned in yet gonna ease it up with some colder water in next few days

**Blood666** · 08-04-2002 10:14 PM

I'm now at 35Â°C on my CPU and 37Â° on mobo with the Thermalright ax 7 ...

**TheCreator** · 08-08-2002 05:12 PM

what do you mean you pluged it in on the wrong side? my 2200 with the thermaltake v7+ and Actic silver 3 is running at 51 normal and 56 under load seems to hot to me .

majormav how much was your water cooling setup

Thread: What voltage 2200 T-bred without overheating?

Thread Tools

Search Thread

Rate This Thread

Display

What voltage 2200 T-bred without overheating?

Posting Permissions