Commando again! E66 ->100% OC ,88GTS ->Aqua03 @ 226k,3d01 @ 70k+,pics

[PcCI2iminal]

100% OC

http://valid.x86-secret.com/show_oc?id=171855

3d01 boot @ 475fsb

http://service.futuremark.com/compare?2k1=9155316

strap 1066
aqua03

3d03

http://service.futuremark.com/compare?2k3=5229536
3d05(20150 3dmarks)
http://service.futuremark.com/compare?3dm05=2724280
3d06(11533 3dmarks)
http://service.futuremark.com/compare?3dm06=1307812

Cinebench

Nuclearus

Superpi


Pics


MB->Commando no mods
Bios->0803
Bios1->vcore 1.75v,vddr->2.5v,vFSB->1.45v,vNB->2.0v,sb vcore->1.15v,vSB->1.7v,PCIEx->124mhz
CPU->Conroe E66 ES
Cooling->Dice + Propanol
VGA->Leadtek 88GTS 320mb 670/1040mhz
RAM->Crucial 6400
HDD->Hitachi 40GB
PSU->Giga-EZ 1000w

[blossa]

:thumbsup:

One question just to make it clear: Is this still with ONE 8800GTS?

[before]

Nice stuff Very sweet pics!

Didn't you try with more Vcore?

[italian soldier]

Very great boy!!!

[hausner]

Some serious clocks

[TiduZ]

Looking sweet! Keep going!

[HermS]

Good work there PCCrim, I especially like how you've rigged up some ghetto mod on the GPU for better cooling, how much of an increase did that give you? and was that 1.75v vcore for the 4.9GHz cpu-z?

We have quite similar setups; E6600, 8800 320 apart from I'm on a mach II, and our scores and clocks are so alike it is scary, even the voltages we use are almost identical.. hehe I wish my 8800 was as strong as yours though! I'd be willing to bet you could easily break 36k in 03.

Good job all round sir.

Maff

[momomo6789]

gj very nice o/c

[PcCI2iminal]

:thumbsup:

One question just to make it clear: Is this still with ONE 8800GTS?

its not possible 88GTS @ SLI on Intel chipset

[PcCI2iminal]

Nice stuff Very sweet pics!

Didn't you try with more Vcore?

yep,i tried 1.8v withou any gain ,the best for that run was 1.75v

[mr_knowitall15]

GOOD GRAVY!!! Those are sweet scores! Except for 03, it seems low. AT around 3.6GHz, with my vid card as in sig, i get 27k. Seems like your score should be a bit higher than that, based on your almost 20k higher in 01, and like 60k higher in AM3, but i suppose thats because theyre more spu dependant... Anyway, Nice freakin CPU clocks :thumbsup:

[PcCI2iminal]

Good work there PCCrim, I especially like how you've rigged up some ghetto mod on the GPU for better cooling, how much of an increase did that give you? and was that 1.75v vcore for the 4.9GHz cpu-z?

no gains , at this time the room temp did not help me -->23C and i just did the mod cz with the original 88GTS cooling i can`t fit the Zalman Sink on SB
and i used 1.75v for 4938mhz

We have quite similar setups; E6600, 8800 320 apart from I'm on a mach II, and our scores and clocks are so alike it is scary, even the voltages we use are almost identical.. hehe I wish my 8800 was as strong as yours though! I'd be willing to bet you could easily break 36k in 03.

very similar my friend and i like very much that new combo

with 8800gtx i can easily get 40k+ in 3d03 and "only" 33.5k seems very low for the clock

[HermS]

with 8800gtx i can easily get 40k+ in 3d03 and "only" 33.5k seems very low for the clock

Yeah I think maybe the 320's are not as strong in some benches (03 and 06 especially) as one might expect. So many variables and not enough data (yet) to see any kind of trend developing, I was thinking that perhaps it's driver related being as it's a new card and all, but thats just speculation.


I too have a Zalman on the Southbridge and like you I found it was in the way of the GPU heatsink... but it was nothing a hacksaw couldn't cure



Anyways, enough about my setup, good luck with your next bench session PCCrim, I'm looking forward to your next results... as usual

Maff

[over@locker886]

... Is this another Commando?

[K.J.]

good jobs and good results !

[PcCI2iminal]

here a 3d03 score on P5WDG2 WS Pro ,88GTS @ 660/1040)



and 88GTX (670/1000) on P5WDG2 WS Pro + Conroe 4ghz


GTX beats GTS 320mb by 6000 3dmarks :S

I too have a Zalman on the Southbridge and like you I found it was in the way of the GPU heatsink... but it was nothing a hacksaw couldn't cure

very nice HermS ,i will do the same with my Zalman

[PcCI2iminal]

... Is this another Commando?

no, it`s the same Commando-> my second

[erwinz]

congratz mate.. very nice results!!



tnxs for sharing..

[nikolas61]

great scores

[Athens[2004]]

PcCI2iminal @ Νιce setup , pics , results .

Now switch off this 6600 with your quad on commando for a second round