2GB OCZ PC2-8000 Titanium Alpha VX2 @560mhz 4-3-3-4 / @600mhz 5-3-3-3

[Blknoel]

Then I must have missed it =P

In that case, congrats on the pi times that is very fast for non 975x, try to pull sub 13m with sub 3.6Ghz, 2:3 with Ram at 600, multi 9. ^^

[dinos22]

Then I must have missed it =P

In that case, congrats on the pi times that is very fast for non 975x, try to pull sub 13m with sub 3.6Ghz, 2:3 with Ram at 600, multi 9. ^^

it will never happen unless he can run 700MHz 5-3-3

[Blknoel]

Actually K|ngP|n has done 12min57 with 3603Mhz on P5B-Dx 1066 strap, Corsair 6400C3 GKX at 600 4-4-4-5

I think its worth a try on 680i, too bad I don't have a board.

And eva: 5-3-3 is an interesting pickup, I didn't know it is this fast until I saw your tests

[eva2000]

for now 680i is still a bit behind from 965p at least ... but who knows

[erwinz]

waaaaa... I like these memory..

you can push to 2.5 volts and your still inside the OVP warranty.. OCZ is great..

[clon22]

he's on 680i you do realise that

completely different beast to intel chipsets

As usual, i"m always impressed by eva's
super detailed testings...

[dinos22]

As usual, i"m always impressed by eva's
super detailed testings...

that's one of the main reasons why i am such a loyal member of his own forum and all teams related to the forum................really good to bounce ideas with and doesn't think he's too big for his shoes unlike a lot of suckers i've come across routinely here and everyone else

btw his site is www.i4memory.com

just in case people didn't know

[sbin]

Great deal on newegg on ocz OCZ EL DDR2 PC2-8800 / 1100MHz / Gold Edition $194 after mir.
Thinking about buying but wonder if the timing will run anywhere near that VX2

[kemo]

Great deal on newegg on ocz OCZ EL DDR2 PC2-8800 / 1100MHz / Gold Edition $194 after mir.
Thinking about buying but wonder if the timing will run anywhere near that VX2

off topic but you got more than 90% chance to hit DDR1100 Cas4 (you got warranty up to 2.52V) but hitting same trimmings like eva , you wont be able to do it even with an identical kit

[sbin]

Great thread.
Definately interesting to see how people are pushing the performance on the 680i chipset.

Sorry about going off topic, thanks for the link!

[Phil The Greek]

eva this is the time I got at 4Ghz with my Supertalent's PC6400C5

[erwinz]

very nice results indeed.. what is the voltage you use??

[eva2000]

eva this is the time I got at 4Ghz with my Supertalent's PC6400C5

congrats man what cpu cooling/vcore used ?

[Phil The Greek]

congrats man what cpu cooling/vcore used ?

Thanks.This was made with watercooling and 1.5 real vcore adjusted with vcore mod.Also 1.55v on Supertalents cooled by a pair of Tornados 90.

[Phil The Greek]

And this is a deferent aproach,booted @424fsb(1696/memory unlinked and set @1180Mhz) and clockgened trying to benefit from higher fsb and memory speed.Unfortunately I don't have a better screenshot with more details because I was hopping for a 4Ghz run.My chipset had other oppinion
The timmings are the same.I'll try again when I'll have some time.

[eva2000]

And this is a deferent aproach,booted @424fsb(1696/memory unlinked and set @1180Mhz) and clockgened trying to benefit from higher fsb and memory speed.Unfortunately I don't have a better screenshot with more details because I was hopping for a 4Ghz run.My chipset had other oppinion
The timmings are the same.I'll try again when I'll have some time.

still very nice though

[Quentin]

Who makes the news SPD ?

[mele]

I have these in a P5B-Dlx, I gave up on my GSkill HZ's after a third stick died.

Anyway, Anyone have a Idea as to what subtimmings to use?

Mel

[Phil The Greek]

still very nice though

Thanks.Just noticed I got offtopic with my Supertalents.Sorry about that.I will post any updates on the 680i thread

[SLi_dog]

that's one of the main reasons why i am such a loyal member of his own forum and all teams related to the forum................really good to bounce ideas with and doesn't think he's too big for his shoes

btw his site is www.i4memory.com

just in case people didn't know

Yeah, I second that. Top bloke, top site


BTW, the OCZ Ti Alpha VX PC8000s are covered by EVP warranty up to 2.52v but that voltage can kill them!!!!! I had a set die from running 2.5v, they were replace by OCZ of course but it was still annoying and costly for freight.


Here's what they did with 2.5v though. No doubt I could have tightened up the sub timmings alot more but was just going for max clocks.

[eva2000]

Yeah voltage may kill even if it's within warranty terms. I try to keep benching vdimm to 2.5v vdimm max and usually stay below 2.3-2.35v.

Touch wood that my modules seem to get better with age.. or probably I've had more time tweaking them i.e. http://www.xtremesystems.org/forums/...d.php?t=136258

[shaolin95]

Bringing this back from the grave....Eva, would you still prefer the VX2 over the OCZ Reaper HPC PC2 9200? I havent figure out yet if I will go with the Striker or a DFI mobo (I like DFI a lot) so I am trying to solve the memory dilema first.

Regards

[shaolin95]

Bringing this back from the grave....Eva, would you still prefer the VX2 over the OCZ Reaper HPC PC2 9200? I havent figure out yet if I will go with the Striker or a DFI mobo (I like DFI a lot) so I am trying to solve the memory dilema first.

Regards

[eva2000]

Bringing this back from the grave....Eva, would you still prefer the VX2 over the OCZ Reaper HPC PC2 9200? I havent figure out yet if I will go with the Striker or a DFI mobo (I like DFI a lot) so I am trying to solve the memory dilema first.

Regards

Yes prefer my OCZ 8000 VX2 over 9200 FlexXLC. my 8000VX2 handle 600mhz 5-3-3-3 tight sub timings but 9200 FlexXLC tightest i can go is 5-5-4-5 ...

[shaolin95]

Awesome! No cold boot issues here right? I used to have the other OCZ VX Gold and while I loved its performance (250 @ 2-2-2) the cold boot was driving me nuts.

Thanks again for this