Is this normal? I added UV liquid to a loop just to test it and aftger 10 days the water does not glow anymore? I am also using silver in the loop could this be the cause? Anyone had this happened to him?
Is this normal? I added UV liquid to a loop just to test it and aftger 10 days the water does not glow anymore? I am also using silver in the loop could this be the cause? Anyone had this happened to him?
Hardware :Asus Rampage Extreme, 4870X2 (Crossfire X) EK FC Blocks, CPU Q9550@490FSB/4,180Ghz, RAM 4GB DDR3, Auzentech Prelude X-fi,PSU - Thermaltake Toughpower 1200 Watt,
3 Loops with TFCs360 and a PA.120.2/DDCs.
If I were a bettin' man, I bet that you were using Fluid XP...Am I right?
http://www.xtremesystems.org/forums/...ighlight=fluid
I'm using the blue Pentosin G11 from Petra's and it's not UV reactive so I added the following...
http://www.performance-pcs.com/catal...oducts_id=2740
I'm still getting the UV reaction even after nearly a month of use...
Last edited by BigBlueBoy; 02-15-2007 at 06:55 AM.
Well I am not using Fluid XP - Only pharmaceutical water (WFI - water for injection) and silver wire for algae. That is all no other additive!
Hardware :Asus Rampage Extreme, 4870X2 (Crossfire X) EK FC Blocks, CPU Q9550@490FSB/4,180Ghz, RAM 4GB DDR3, Auzentech Prelude X-fi,PSU - Thermaltake Toughpower 1200 Watt,
3 Loops with TFCs360 and a PA.120.2/DDCs.
what UV additive are you using?
My New Rig My OLD Rig
Case: Mountain Mods - U2-UFO Horizon Black Powder Coat - Original Top
Power Supply: Enermax Galaxy Gaming Edition 1000W Power Supply EGA1000EWL-DXX
Motherboard: EVGA NVIDIA nForce 680i SLI ATX
CPU: Intel Core 2 Extreme QX6700 Kentsfield 2.66GHz
Ram: Dominator 4GB (4 x 1GB) DDR2 1066 (PC2 8500)
CD / DVD burner: Plextor PX-755SA internal Serial ATA
Hard Drives: SeaGate HD 250Gig 7K 8M SATA2 ST3250824AS / SeaGate HD 500Gig 7K 16M SATA2 ST3500630AS
Water Cooling: Swiftech H20-220 Apex Ultra CPU Liquid Cooling Kit / EK NF4 On the SB / DD-680i Chipset Block / 2 - Danger Den Delrin Fillport / DD-D5 Pump / 7/16" ID (5/8" OD) Masterkleer / PA120.3 with shroud
Fan Controller: Sunbeam 5.25" Chromatic Windmill Full Function Fan Controller – Black
Fans: 2-120MM Aerocool XtremeTurbine – Silver / 2-Thermaltake A2018 120mm Blue LED / 4-SCYTHE S-FLEX™ 120mm
Misc: 4” Cathode Tube UV / 5-12” Cathode Tube UV
It just says UV additive blue on the bottle and I bought it from Alphacool online store.
But really could it be the silver wire I use in the loop?
Hardware :Asus Rampage Extreme, 4870X2 (Crossfire X) EK FC Blocks, CPU Q9550@490FSB/4,180Ghz, RAM 4GB DDR3, Auzentech Prelude X-fi,PSU - Thermaltake Toughpower 1200 Watt,
3 Loops with TFCs360 and a PA.120.2/DDCs.
Posting Permissions
Reply With Quote