damn! what kinda temps u gettin with that? im gettin 20c at 2.62 with 1.85v
damn! what kinda temps u gettin with that? im gettin 20c at 2.62 with 1.85v
In the works... P5wdh | E6600 | G-skill 6400 hz | Ocz Gamextreme 700w | 2x Wd 250 raid-0 | 7600gs until i get my x1950pro
Main Rig: - Ic7-g 2.4c @3.3 1.6v| 2x 256mb corsahair 3500 2-3-3-5 | 9700128mb | Antec430 truepower | mcw478uht cpu @ 10c full load
Server:- Epox 8rda+ 2100 @ 2.4 1.85v | 2x 256 corshair 3200 twinx | msi5200 | TTGI520 | slk800 40c full load soon to be watercooled.....
What is the temp of your water after the pump before the tec at that 20c CPU reading?
well right now im at -6c!!!!
In the works... P5wdh | E6600 | G-skill 6400 hz | Ocz Gamextreme 700w | 2x Wd 250 raid-0 | 7600gs until i get my x1950pro
Main Rig: - Ic7-g 2.4c @3.3 1.6v| 2x 256mb corsahair 3500 2-3-3-5 | 9700128mb | Antec430 truepower | mcw478uht cpu @ 10c full load
Server:- Epox 8rda+ 2100 @ 2.4 1.85v | 2x 256 corshair 3200 twinx | msi5200 | TTGI520 | slk800 40c full load soon to be watercooled.....
In the works... P5wdh | E6600 | G-skill 6400 hz | Ocz Gamextreme 700w | 2x Wd 250 raid-0 | 7600gs until i get my x1950pro
Main Rig: - Ic7-g 2.4c @3.3 1.6v| 2x 256mb corsahair 3500 2-3-3-5 | 9700128mb | Antec430 truepower | mcw478uht cpu @ 10c full load
Server:- Epox 8rda+ 2100 @ 2.4 1.85v | 2x 256 corshair 3200 twinx | msi5200 | TTGI520 | slk800 40c full load soon to be watercooled.....
You were at 20C, now -6 (congrads pimpman!). :-) What did you change to get the better temp, or is that at startup?
Do you still get up to 20C under load?
And do you know what your water temp is as it hits the hot side of the pelt under full load?
Also, your running the 8rda? Does your CPU temp diplay on your digital readout on the MB?
Thanks!
Zippyc
well i upgraded the cooling a lil bit and slapped in a chiller AKA ยงยงยงยง load of ice! basically 0cwater hittin the hot side of the tec! i hit -10 with stock settins i was at like 2c at full load at 2.8
In the works... P5wdh | E6600 | G-skill 6400 hz | Ocz Gamextreme 700w | 2x Wd 250 raid-0 | 7600gs until i get my x1950pro
Main Rig: - Ic7-g 2.4c @3.3 1.6v| 2x 256mb corsahair 3500 2-3-3-5 | 9700128mb | Antec430 truepower | mcw478uht cpu @ 10c full load
Server:- Epox 8rda+ 2100 @ 2.4 1.85v | 2x 256 corshair 3200 twinx | msi5200 | TTGI520 | slk800 40c full load soon to be watercooled.....
That explains it. Too bad we can't always use ice, but you can use it to get stable for you high-frequency mad onion runs.
I'm liking chong345s freezer/pelt combo better and better, but I can't afford the bigger house with enough extra space in it to make the wife say "OK". Maybe I'll hit the lotto...
I saw a posting where a dude was getting 17C wtih a single radiator and that 462 Swifty/pelt combo. I think he was in NY, and it is 55F there now...
It is here for you to compare temps to...
http://www.xtremesystems.org/forums/...threadid=14877
thx col...when you gonna give that thing a 'home'???? lol
pimp, if you were asking me on temps, stock temps are -4c idle and 2c load on the cpu, and 0c idle/11c load on the gpu. overclocked to 2600mhz w/ 2v on the cpu its 15c/25c and the gpu @ 610 core 12/26c.
i need to cool the mem on the 5800 U better as it runs damn hot with just the tweak sinks on there... or just put the 9700 pro back in, but i have to rig up the probe to take core temps for that...
how do u have such good temps is that chilled water?Originally posted by cygnus_x_1
thx col...when you gonna give that thing a 'home'???? lol
pimp, if you were asking me on temps, stock temps are -4c idle and 2c load on the cpu, and 0c idle/11c load on the gpu. overclocked to 2600mhz w/ 2v on the cpu its 15c/25c and the gpu @ 610 core 12/26c.
i need to cool the mem on the 5800 U better as it runs damn hot with just the tweak sinks on there... or just put the 9700 pro back in, but i have to rig up the probe to take core temps for that...
In the works... P5wdh | E6600 | G-skill 6400 hz | Ocz Gamextreme 700w | 2x Wd 250 raid-0 | 7600gs until i get my x1950pro
Main Rig: - Ic7-g 2.4c @3.3 1.6v| 2x 256mb corsahair 3500 2-3-3-5 | 9700128mb | Antec430 truepower | mcw478uht cpu @ 10c full load
Server:- Epox 8rda+ 2100 @ 2.4 1.85v | 2x 256 corshair 3200 twinx | msi5200 | TTGI520 | slk800 40c full load soon to be watercooled.....
not chilled yet...still trying to decide which way im gonna chill the h20. i was really trying to have it semi-portable, but i do want to chill the water since it heats up pretty good...
i am betting its my ambient temps...even tho im in jersey, it hasnt gotten to hot yet, but im sure as the ambient temps go up, so will my system temps...
whats the ambient temps then? like 10c jesus
In the works... P5wdh | E6600 | G-skill 6400 hz | Ocz Gamextreme 700w | 2x Wd 250 raid-0 | 7600gs until i get my x1950pro
Main Rig: - Ic7-g 2.4c @3.3 1.6v| 2x 256mb corsahair 3500 2-3-3-5 | 9700128mb | Antec430 truepower | mcw478uht cpu @ 10c full load
Server:- Epox 8rda+ 2100 @ 2.4 1.85v | 2x 256 corshair 3200 twinx | msi5200 | TTGI520 | slk800 40c full load soon to be watercooled.....
Not got any pics of my setups, but i do have a home made direct hotside cooling block i made a fair few months back. Its a 172watt tec and some copper, it averaged 9degrees unloaded cpu temps with ambient water @ 1.9v on a 2500mhz tbred 'b'
Its got insulation on it now ill post some more pics once i get setup in my new house.... Its going to relegated to gpu once my direct die phase change is setup...
]JR[
Got rid of TEC setup. Got this
Antec TruBlue 480W - Epox 8RDA - XP2100 'B'@12x220mhz=2652mhz@1.85V Max: 2800mhz@2.125V
2x256mb PC3200 Twinmos 3-2-2-2 -
WD 120gig/80gig 8MB Cache Maxtor 30/20gig 7200rpm
Radeon 9500 Pro & 9700 Pro
3dMark2001:15756
MCW50-T, 2xD-Tek Procore Combos, Hydro L30, 2xYS-Tech 120x38mm, Nexus Fan Controller, 10ft Clearflex60 1/2in, Swiftech 1/2in F&B kit, Pump Relay Switch V2
Where did you get your hands on that?!?!
Last edited by Method Man; 07-06-2003 at 07:17 PM.
Abit IC7 @300FSB Bios 28
P4 2.4C@3.6Ghz
ATI 9700 Pro @ 445/710 Vgpu modded
Corsair XMS PC 3500 256mb x2
Liteon 52x24x52 CDRW
WD 40GB 7200RPM x2
Enermax EG465P-VE(FCA)
Chevy Chevette Heater Core
MCW50-T
Eheim 1048
Prometeia Mach I
Lian Li PC65B
wow gtcrispy that is gorgeous
electrical engineering lab rat
As always, there are three important questions involved:
What is the heat load?
How cold do you want it?
Will that be Visa, MC, or Discover Card?
-gary
Bought the upper reciever on the internet the lower reciever locally. Anyone can buy the upper. The lower you must be 18 and go through a background check at the gun dealer to actually purchase it. Method because you live in CA you can't OWN one
Antec TruBlue 480W - Epox 8RDA - XP2100 'B'@12x220mhz=2652mhz@1.85V Max: 2800mhz@2.125V
2x256mb PC3200 Twinmos 3-2-2-2 -
WD 120gig/80gig 8MB Cache Maxtor 30/20gig 7200rpm
Radeon 9500 Pro & 9700 Pro
3dMark2001:15756
MCW50-T, 2xD-Tek Procore Combos, Hydro L30, 2xYS-Tech 120x38mm, Nexus Fan Controller, 10ft Clearflex60 1/2in, Swiftech 1/2in F&B kit, Pump Relay Switch V2
haha in texas you can own any kind of gun it seems. i know many people with extensive gun collections. its a little scary sometimes when someone shows you their collection, you hope that they are all together mentally becasue you are standing in a pile of THEIR guns. i am always nice to people with guns like that. i have 3 guns, an over-under 12 gauge, a pump 12gauge, and a semi auto 22 cal rifle. i would like to look into a pistol someday, maybe a glock 20 or a .357 magnum.
electrical engineering lab rat
As always, there are three important questions involved:
What is the heat load?
How cold do you want it?
Will that be Visa, MC, or Discover Card?
-gary
I can own one just not legaly I have a mexican friend that has m16's, ak47's and so onOriginally posted by gtcrispy
Bought the upper reciever on the internet the lower reciever locally. Anyone can buy the upper. The lower you must be 18 and go through a background check at the gun dealer to actually purchase it. Method because you live in CA you can't OWN one
ellsworth you shuld look into a Desert Eagle 50AE awsome handgun
Abit IC7 @300FSB Bios 28
P4 2.4C@3.6Ghz
ATI 9700 Pro @ 445/710 Vgpu modded
Corsair XMS PC 3500 256mb x2
Liteon 52x24x52 CDRW
WD 40GB 7200RPM x2
Enermax EG465P-VE(FCA)
Chevy Chevette Heater Core
MCW50-T
Eheim 1048
Prometeia Mach I
Lian Li PC65B
ak-47 are not illegal in us....if there not automatic....but thats fixed easily...
In the works... P5wdh | E6600 | G-skill 6400 hz | Ocz Gamextreme 700w | 2x Wd 250 raid-0 | 7600gs until i get my x1950pro
Main Rig: - Ic7-g 2.4c @3.3 1.6v| 2x 256mb corsahair 3500 2-3-3-5 | 9700128mb | Antec430 truepower | mcw478uht cpu @ 10c full load
Server:- Epox 8rda+ 2100 @ 2.4 1.85v | 2x 256 corshair 3200 twinx | msi5200 | TTGI520 | slk800 40c full load soon to be watercooled.....
probably the same place that I got these:Originally posted by Method Man
Where did you get your hands on that?!?!
http://www.villagephotos.com/viewpub...asp?id_=227917
http://www.villagephotos.com/viewpub...asp?id_=249003
if you are in the right state and you have the right permits, the full auto version is perfectly legal -- as are silenced or suppressed weapons. I have been looking at the mp5s lately... I need one of those in the collection and soon.ak-47 are not illegal in us....if there not automatic....but thats fixed easily...
the $10,000 price tag stings a bit though:
http://www.gunsamerica.com/guns/976348072.htm
Last edited by Weapon; 07-11-2003 at 09:18 AM.
Counting bodies like sheep to the rhythm of the war drums.
go to sleep
go to sleep
go back to sleep.
carpe noctem.
Yea if you want full-auto you need to go through a bunch of paper work. Pay the $200 tax stamp. Buy the gun. Wait months just so you can go pick up your Class 3 Firearm. Once its all done..thats when the fun starts
Antec TruBlue 480W - Epox 8RDA - XP2100 'B'@12x220mhz=2652mhz@1.85V Max: 2800mhz@2.125V
2x256mb PC3200 Twinmos 3-2-2-2 -
WD 120gig/80gig 8MB Cache Maxtor 30/20gig 7200rpm
Radeon 9500 Pro & 9700 Pro
3dMark2001:15756
MCW50-T, 2xD-Tek Procore Combos, Hydro L30, 2xYS-Tech 120x38mm, Nexus Fan Controller, 10ft Clearflex60 1/2in, Swiftech 1/2in F&B kit, Pump Relay Switch V2
Bookmarks