GSKILL F2-6400CL5D-4GBPQ info

[GSKILL TECH]

i tested while ago and now is realy to sell.
now i am doing motherboard compatible testing
with P5N-E 650i i can easy DDR2 800 CL5-4-3-5 2T with 1.95v (lowest v-dimm by P5N-E)
however overclocking for 4GB is really hard....
other testing pic will be up soon


GST

[Okda]

will be waiting for ur results, some friends here in Egypt are asking me for those rams

[GSKILL TECH]

it is like this

[dinos22]

you just need a 64-bit system now hehehe

[GSKILL TECH]

you just need a 64-bit system now hehehe

i know
i want to try 8GB all together!!

[lee63]

I'm getting BSODs with this ram in Vista ultimate 64 bit when Windows starts, I have tried 1x2GB stick and it works fine, I have tested both sticks and they are ok. any help will be appreciated.

Thanx in advance

[CyberDruid]

I'm getting BSODs with this ram in Vista ultimate 64 bit when Windows starts, I have tried 1x2GB stick and it works fine, I have tested both sticks and they are ok. any help will be appreciated.

Thanx in advance

I am afraid this is is a driver error related to the GFX...

I too had this exact same issue with GeIL Black Dragon 8GB kit and despite a number of tests was only able to get 8GB to run in Vista 64bit Ultimate in SAFE mode or after a fresh install of GFX drivers --however upon reboot there would still be the BSOD--it is not Voltage dependent/timing dependent--it is related directly to having GFX drivers installed. 2 GB or 4GB will work but not 6 GB or 8 GB--no matter which slots are used or which sticks are used...I spent 12 hours in one stretch trying to work through the problem.

My Vista 64 bit Ultimate is fully updated/patched/hotfixed.

I do not think it is related to the G Skill or the GeIL in particular--I think it is a bug in how 64bit uses more than 4GB pf RAM once GFX drivers are installed...a real shame.

If I thought it would be different with a different MFR I would try any brand to see how 8GB performs...I aslo tried a number of GFX drivers to see if it was a DX 10 issue.

A non HW issue like this may be hard to resolve without getting MS off their butts to make some efforts and likely would involve the GFX drivers or some sort of patch there. Simply working with the RAM mfrs to resolve this is probably futile--as it seems to be a SW/OS/Driver issue peculiar to Vista 64 bit.

Seems like more MS BS to me--making an operating system that claims to use more than 4GB of RAM--but can't.

[GSKILL TECH]

please give me more spec of your pc

[lee63]

please give me more spec of your pc

Here ya go

eVGA nForce 680i SLi, OCZ XTC Ram Cooler
Intel Core 2 Extreme QX6700 @ 3.3GHz, Tuniq Tower
2 X eVGA 8800 GTX, Silverstone Zeus ST85ZF 850w
4 GB G.Skill DDR2 800 , Plextor PX-716SA
WD 74 GB Raptor , Dell 2405 FPW, 1920x1200
Microsoft Habu, Saitek Eclipse II, CM Stacker 830 Black
Windows Vista Ultimate 64bit , Sennheiser HD555s.

680i bios = P24
GPU Drivers = 100.59
Windows Vista Ultimate 64 bit with all updates

if theres anything else you need let me know.

[GSKILL TECH]

Here ya go

eVGA nForce 680i SLi, OCZ XTC Ram Cooler
Intel Core 2 Extreme QX6700 @ 3.3GHz, Tuniq Tower
2 X eVGA 8800 GTX, Silverstone Zeus ST85ZF 850w
4 GB G.Skill DDR2 800 , Plextor PX-716SA
WD 74 GB Raptor , Dell 2405 FPW, 1920x1200
Microsoft Habu, Saitek Eclipse II, CM Stacker 830 Black
Windows Vista Ultimate 64bit , Sennheiser HD555s.

680i bios = P24
GPU Drivers = 100.59
Windows Vista Ultimate 64 bit with all updates

if theres anything else you need let me know.

bsod with EVGA 680i motherboard... hummm that is weird.
with 680i mobo there is no issue tho
maybe just rma the ram. have you test one by one?
using all auto seting

[lee63]

Yes I have tested each one and they work fine, all 4GB worked fine in XP64 bit also, I did not test them on auto, I had my voltage @1.9, 800Mhz and timings @ 5-5-5-15, the BSODs are random, its really weird, I think its the OS.

[GOZ]

Yes I have tested each one and they work fine, all 4GB worked fine in XP64 bit also, I did not test them on auto, I had my voltage @1.9, 800Mhz and timings @ 5-5-5-15, the BSODs are random, its really weird, I think its the OS.

There is a patch out from M$, boot useing 1 stick find the patch, install, shutdown install next stick and bam your fixed

[ZoLKoRn]

i tested while ago and now is realy to sell.
now i am doing motherboard compatible testing
with P5N-E 650i i can easy DDR2 800 CL5-4-3-5 2T with 1.95v (lowest v-dimm by P5N-E)
however overclocking for 4GB is really hard....
other testing pic will be up soon


GST

So if i use on P965 chip, How the CL on 800MHz ?

ps. i'll waiting for sample is send to overclockzone

best regards
ZoLKoRn.

[GSKILL TECH]

So if i use on P965 chip, How the CL on 800MHz ?

ps. i'll waiting for sample is send to overclockzone

best regards
ZoLKoRn.

i think 5-4-4-x should be ok

[ZoLKoRn]

Thank you sir.

[lee63]

Well ??? Mr G.Skill.

[GSKILL TECH]

test it with XP64bit again. i am sure mobo and ram is good to run together.

[Space_Man]

Hey anyone got any links of some benching done with this ram? Just wondering what everyone is able to get out of them. I have 2kits in my Asus Crosshair AM2 5000. Running it at 757.2MHz right now with Cas 5-4-4-10-16-30-2-4-2 with 2Volts going to it. Has ran memtest+ 1.7 for 24+hours so far with no errors. Hope I will be trying to up the MHz back to 801MHz some time later this week when I oc my cpu alittle more. I had them running at 807MHz before with a smaller cpu overclock with those timing and it also did memtest+ 1.7 for 24+hours with no errors. Great ram so far. Also my ram temps are usually in the mid 80's with the little thermo sensor I put inside the heatspreader.

[GSKILL TECH]

Hey anyone got any links of some benching done with this ram? Just wondering what everyone is able to get out of them. I have 2kits in my Asus Crosshair AM2 5000. Running it at 757.2MHz right now with Cas 5-4-4-10-16-30-2-4-2 with 2Volts going to it. Has ran memtest+ 1.7 for 24+hours so far with no errors. Hope I will be trying to up the MHz back to 801MHz some time later this week when I oc my cpu alittle more. I had them running at 807MHz before with a smaller cpu overclock with those timing and it also did memtest+ 1.7 for 24+hours with no errors. Great ram so far. Also my ram temps are usually in the mid 80's with the little thermo sensor I put inside the heatspreader.

should not need 2.v to run, 1.8v is good enough

[Triz08]

Anyone have any luck with overclocking this set to around ddr-900 speeds?

[andyddr]

Anyone overclocked with lower latencies at higher speeds please post your results!!!! I'm hoping my set will see at least DDR900 speeds...

Edit: You guys thought about entering the market in Africa yet? Please PM me if you are interested as I'd like to be a supplier of your products here

[ludeboy12]

damn I'm trying to get these down to 4-4-4-12 @450 on my IP-35 pro and its just not happening. not sure if its the kit or this board but i just cant seem to get things going here.

run up to 500 @ 5-5-5-15 though. so at least thats good.

any help w/ some suggested timings would be great.

[Fuzzy_3D]

run up to 500 @ 5-5-5-15 though. so at least thats good.

What did you do to get such an oc on those? And what voltage is that at?
Curious since I have this kit arriving next week for my P53-DS3P.

[impar]

Greetings!

run up to 500 @ 5-5-5-15 though. so at least thats good.

With the 2x2GB kit?

[ludeboy12]

Greetings!With the 2x2GB kit?

oh you're right. my bad i posted this on the wrong thread. got the nq 2gb kit here. sorry guys.