GSKILL F2-6400CL5D-4GBPQ info

[GSKILL TECH]

i tested while ago and now is realy to sell.
now i am doing motherboard compatible testing
with P5N-E 650i i can easy DDR2 800 CL5-4-3-5 2T with 1.95v (lowest v-dimm by P5N-E)
however overclocking for 4GB is really hard....
other testing pic will be up soon


GST

[Okda]

will be waiting for ur results, some friends here in Egypt are asking me for those rams

[GSKILL TECH]

it is like this

[dinos22]

you just need a 64-bit system now hehehe

[GSKILL TECH]

you just need a 64-bit system now hehehe

i know
i want to try 8GB all together!!

[lee63]

I'm getting BSODs with this ram in Vista ultimate 64 bit when Windows starts, I have tried 1x2GB stick and it works fine, I have tested both sticks and they are ok. any help will be appreciated.

Thanx in advance

[GSKILL TECH]

please give me more spec of your pc

[ZoLKoRn]

i tested while ago and now is realy to sell.
now i am doing motherboard compatible testing
with P5N-E 650i i can easy DDR2 800 CL5-4-3-5 2T with 1.95v (lowest v-dimm by P5N-E)
however overclocking for 4GB is really hard....
other testing pic will be up soon


GST

So if i use on P965 chip, How the CL on 800MHz ?

ps. i'll waiting for sample is send to overclockzone

best regards
ZoLKoRn.

[GSKILL TECH]

So if i use on P965 chip, How the CL on 800MHz ?

ps. i'll waiting for sample is send to overclockzone

best regards
ZoLKoRn.

i think 5-4-4-x should be ok

[lee63]

please give me more spec of your pc

Here ya go

eVGA nForce 680i SLi, OCZ XTC Ram Cooler
Intel Core 2 Extreme QX6700 @ 3.3GHz, Tuniq Tower
2 X eVGA 8800 GTX, Silverstone Zeus ST85ZF 850w
4 GB G.Skill DDR2 800 , Plextor PX-716SA
WD 74 GB Raptor , Dell 2405 FPW, 1920x1200
Microsoft Habu, Saitek Eclipse II, CM Stacker 830 Black
Windows Vista Ultimate 64bit , Sennheiser HD555s.

680i bios = P24
GPU Drivers = 100.59
Windows Vista Ultimate 64 bit with all updates

if theres anything else you need let me know.

[ZoLKoRn]

Thank you sir.

[lee63]

Well ??? Mr G.Skill.

[GSKILL TECH]

Here ya go

eVGA nForce 680i SLi, OCZ XTC Ram Cooler
Intel Core 2 Extreme QX6700 @ 3.3GHz, Tuniq Tower
2 X eVGA 8800 GTX, Silverstone Zeus ST85ZF 850w
4 GB G.Skill DDR2 800 , Plextor PX-716SA
WD 74 GB Raptor , Dell 2405 FPW, 1920x1200
Microsoft Habu, Saitek Eclipse II, CM Stacker 830 Black
Windows Vista Ultimate 64bit , Sennheiser HD555s.

680i bios = P24
GPU Drivers = 100.59
Windows Vista Ultimate 64 bit with all updates

if theres anything else you need let me know.

bsod with EVGA 680i motherboard... hummm that is weird.
with 680i mobo there is no issue tho
maybe just rma the ram. have you test one by one?
using all auto seting

[lee63]

Yes I have tested each one and they work fine, all 4GB worked fine in XP64 bit also, I did not test them on auto, I had my voltage @1.9, 800Mhz and timings @ 5-5-5-15, the BSODs are random, its really weird, I think its the OS.

[GSKILL TECH]

test it with XP64bit again. i am sure mobo and ram is good to run together.

[Space_Man]

Hey anyone got any links of some benching done with this ram? Just wondering what everyone is able to get out of them. I have 2kits in my Asus Crosshair AM2 5000. Running it at 757.2MHz right now with Cas 5-4-4-10-16-30-2-4-2 with 2Volts going to it. Has ran memtest+ 1.7 for 24+hours so far with no errors. Hope I will be trying to up the MHz back to 801MHz some time later this week when I oc my cpu alittle more. I had them running at 807MHz before with a smaller cpu overclock with those timing and it also did memtest+ 1.7 for 24+hours with no errors. Great ram so far. Also my ram temps are usually in the mid 80's with the little thermo sensor I put inside the heatspreader.

[GSKILL TECH]

Hey anyone got any links of some benching done with this ram? Just wondering what everyone is able to get out of them. I have 2kits in my Asus Crosshair AM2 5000. Running it at 757.2MHz right now with Cas 5-4-4-10-16-30-2-4-2 with 2Volts going to it. Has ran memtest+ 1.7 for 24+hours so far with no errors. Hope I will be trying to up the MHz back to 801MHz some time later this week when I oc my cpu alittle more. I had them running at 807MHz before with a smaller cpu overclock with those timing and it also did memtest+ 1.7 for 24+hours with no errors. Great ram so far. Also my ram temps are usually in the mid 80's with the little thermo sensor I put inside the heatspreader.

should not need 2.v to run, 1.8v is good enough

[Triz08]

Anyone have any luck with overclocking this set to around ddr-900 speeds?

[andyddr]

Anyone overclocked with lower latencies at higher speeds please post your results!!!! I'm hoping my set will see at least DDR900 speeds...

Edit: You guys thought about entering the market in Africa yet? Please PM me if you are interested as I'd like to be a supplier of your products here

[GOZ]

Yes I have tested each one and they work fine, all 4GB worked fine in XP64 bit also, I did not test them on auto, I had my voltage @1.9, 800Mhz and timings @ 5-5-5-15, the BSODs are random, its really weird, I think its the OS.

There is a patch out from M$, boot useing 1 stick find the patch, install, shutdown install next stick and bam your fixed

[GSKILL TECH]

There is a patch out from M$, boot useing 1 stick find the patch, install, shutdown install next stick and bam your fixed

possible link me to that patch?

[sesdave]

possible link me to that patch?

I have ordered this memory and am running vista x64. The BSOD boot problem seems to be a general one using any 4GB memory with vista x64. A google found this patch http://www.microsoft.com/downloads/d...displaylang=en
check this thread out for more detail on vista x64 and 4gb problem
http://forums.microsoft.com/technet/...&tf=0&pageid=4
- seems to work according to the last few posts. I will find out if it does if I get the same BSOD problems when my memory is delivered tomorrow!

[GSKILL TECH]

I have ordered this memory and am running vista x64. The BSOD boot problem seems to be a general one using any 4GB memory with vista x64. A google found this patch http://www.microsoft.com/downloads/d...displaylang=en
check this thread out for more detail on vista x64 and 4gb problem
http://forums.microsoft.com/technet/...&tf=0&pageid=4
- seems to work according to the last few posts. I will find out if it does if I get the same BSOD problems when my memory is delivered tomorrow!

nice, thx for this info

[sesdave]

nice, thx for this info

Got them ,tried them and they are going back!. My P5W DH v1.04g doesnt seem to like them. The board would only post and boot to winxp pro with SPD enabled - unable to boot with manual stock settings in BIOS . Tried with latest 2103 BIOS same result. I then found I couldn't set them to rated settings with memset without windows freezing. I tried 1.8, 1.9 and 2.0v just to be sure and swapping sticks around in orange slots. This was running with 400 FSB, DDR800 fsb=1.3,MCH=1.65,ICH=1.2v . I tried MCH =1.75 but no go.
I tried vista x64 and it hung after initial logo screen so I didnt even bother going any further - probably needs the patch but I suspect this is more of a MB compatibility problem. .I thought these would be a better choice than my original choice of 4x1GB ballistix 8500C5's as they would be less of a load on the Memory controller.

Heyho - you win some ,you lose some.! The P5W can be a bit picky due to the 975x chip.

[ludeboy12]

damn I'm trying to get these down to 4-4-4-12 @450 on my IP-35 pro and its just not happening. not sure if its the kit or this board but i just cant seem to get things going here.

run up to 500 @ 5-5-5-15 though. so at least thats good.

any help w/ some suggested timings would be great.