Conroe Overclock Database

[Timbosan]

Username: Timbosan
Stability: Orthos 5+ hours, 50 Passes Memtest

CPU name: Core 2 Duo e6300
OC: 3400 Mhz
Stepping: 6 B2
Week: L627
Code: A838
Vcore: 1.384 Vcore (stable)

Cooling: Air
Cooler brand/model: Asus Silent Square + AS5

Motherboard: Asus P5B Vanilla Rev 1.03G | Vdimm & Vdroop modded|
Bios Version: 1405
Operating System: XP PRO SP1

RAM brand: Kingston Value
RAM rated speed: DDR2-533
RAM actual speed: 972 (1:1 FSB 486)
Latency: 5-5-5-15

[vocch]

[laragirl83]

http://valid.x86-secret.com/show_oc.php?id=219590

[road-runner]

CPU: E6850
OC: 3969
Stepping: G0
Week: L718
Code: A190
Vcore: 1.55 volts

Cooling: Water/Fuzion

Motherboard: GA P35 DQ6
Bios Version: F5H
Operating System: XP Pro 32 bit

RAM brand: G Skill HZ
RAM rated speed: PC6400
RAM actual speed: 441
Latency: 5-5-5-15

[chavalcito]

CPU: E6600
OC: 3600MHz
Stepping: 6 B2
Week: L637
Code: A853
vCore: 1.5

Cooling: Air
Cooler: Zalman 9500

Motherboard: EVGA 680i SLI
BIOS: P30
OS: Win XP Pro 32-bit

RAM: g.skill
Rated Speed: PC6400
Actual Speed: 800MHz
Latency: 5-5-5-15

[NLight95]

User Name: NLight95
Stability: Orthos 14+ hours Small FFT, priority 3

CPU name: C2D E6600
OC: 3510 MHz
Stepping: 6, Rev B2
Week: L629
Code: A437
Vcore: 1.504

Cooling: Air
Cooler brand/model: Sunbeam Tuniq Tower 120 (MX-1 thermal paste)

Motherboard: Asus Commando
Bios Version: 1404 (07-13-07)
Operating System: XP 32

RAM brand: Crucial Ballistix Tracer
RAM rated speed: PC8500 (1066)
RAM actual speed: 975
Latency: 5-5-5-15

[TheMysticWizard]

User Name: TheMysticWizard
Stability: Orthos 48 Hours

CPU name : E6600
OC: : 3440MHz
Stepping: : 6 B2
Week: : L646
Code: G508
Vcore: 1.55

Cooling: Water
Cooler brand/model: Zalman Waterblock, Swiftech Radiator
Motherboard: Asus P5B Deluxe
Bios Version: 1101
Operating System: XP 32, Vista 32

RAM brand: Corsair
RAM rated speed: DDR2-800
RAM actual speed: 860
Latency: 4-4-4-12

[karateo]

why do i need only 1.34 vcore to be stable where others use more than 1.4
i am not posting yet for the first page's table
i will, when i finetune my memory

e6300
p5b dlx vdrop mod
ballistix 6400

[chavalcito]

When do we get added to the OCDB?

[max_87]

Username: max_87
Stability: Orthos 12+ hours, Large FFT test

CPU: Core 2 Duo E6850
OC: 3906MHz
Stepping: G0
Week: L720
Code: A745
Vcore: 1.45v

Cooling: Air
Cooler brand/model: Scythe Infinity + Dual 1200RPM fans

Motherboard: Abit IP35 Pro
Bios Version: 10
Operating System: Windows XP Pro SP2

RAM brand: G.Skill
RAM rated speed: DDR2-800
RAM actual speed: 868MHz
Latency: 5-5-5-15

[billdavis]

nice man

welcome back

[max_87]

nice man

welcome back

Thanks

I always lurk around in XS forums, but didn't log in

[r4st4m4n]

User Name: r4st4m4n
Stability: Orthos Blend 8h 30min
CPU name E4300
OC: 3000 Ghz
Stepping: 2 L2
Week: Q649
Code: A224
Vcore: 1.38125V Bios - 1.328V real idle

Cooling: Air
Cooler brand/model: Thermaltake Big Typhoon VX

Motherboard: Gigabyte P35-DS3
Bios Version: F2
Operating System: XP 32

RAM brand: Kingston Value RAM
RAM rated speed: DDR2-667
RAM actual speed: DDR2-667
Latency: 5-5-5-15

[holwill]

User Name: Holwill
Stability: Orthos Small ffts 12hrs+
CPU name E6600
OC: 3604 Ghz
Stepping: 6
Week: L644
Code: G380
Vcore: 1.4875V Bios - 1.46-8 load measured with Everest Ultimate, with Vdroop Pencil mod

Cooling: Water
Water Block Swiftech Storm G4 Rev2

Motherboard: Asus P5W-DH
Bios Version: 2004
Operating System: XP 32

RAM brand: Corsair Xms2 Pc6400v1.2 Micron
RAM rated speed: DDR2-Pc6400
RAM actual speed: DDR2-800
Latency: 4-4-4-12-4

CpuZ http://valid.x86-secret.com/show_oc?id=199584

Room Temps were 28c when run,with a 8800gtx oc in the loop on a PA120.2!

[safan80]

Username: Timbosan
Stability: Orthos 5+ hours, 50 Passes Memtest

CPU name: Core 2 Duo e6300
OC: 3400 Mhz
Stepping: 6 B2
Week: L627
Code: A838
Vcore: 1.384 Vcore (stable)

nice oc you got there with the ram your using. have you tried 7x500?
But you must have at least 8 hours of Orthos, (small FFTs or Blend) or Prime. I wouldn't worry about it though this hasn't been updated since april.

[kenofstephen]

oh, just saw this thread.....I done it October, last year .....

Blend......12 hrs

User Name: kenofstephen
Stability: Blend 12hrs+
CPU name E6600
OC: 3,710 Mhz
Stepping: 5
Week: ES
Code: ES
Vcore: 1.45v BIOS

Cooling: Air, Tower 120 with fan mod.

Motherboard: ABIT AW9D-MAX
BIOS Version: should be 1.0
Operating System: XP 32

RAM : Supertalent DDR2 800
RAM actual speed: DDR2-824
Latency: 4-4-3-8 @ 2.1v

[laragirl83]

E6400 @ 1.376V under load (BIOS 1.450V 'cuz of VDrop)

[Seolfor]

oh, just saw this thread.....I done it October, last year .....

Blend......12 hrs

User Name: kenofstephen
Stability: Blend 12hrs+
CPU name E6600
OC: 3,710 Mhz
Stepping: 5
Week: ES
Code: ES
Vcore: 1.45v BIOS

Cooling: Air, Tower 120 with fan mod.

Motherboard: ABIT AW9D-MAX
BIOS Version: should be 1.0
Operating System: XP 32

RAM : Supertalent DDR2 800
RAM actual speed: DDR2-824
Latency: 4-4-3-8 @ 2.1v

Kenofstephen, I hate to be the bearer of bad news, but the OC is not 3,710 Mhz. It's true that Orthos is reporting that number, but Orthos isn't taking into account that your multiplier is now set to 6 rather than 9. Your actual OC is what's reported by CPU-Z. In this case, it's 2,472(6 x 412) Mhz. What you have is a good FSB overclock, and it's definitely something to be proud of.

As for Core Temp Beta....that's just confusing. Probably why they referred to it as "Beta."

[Taffer]

Kenofstephen, I hate to be the bearer of bad news, but the OC is not 3,710 Mhz. It's true that Orthos is reporting that number, but Orthos isn't taking into account that your multiplier is now set to 6 rather than 9. Your actual OC is what's reported by CPU-Z. In this case, it's 2,472(6 x 412) Mhz. What you have is a good FSB overclock, and it's definitely something to be proud of.

As for Core Temp Beta....that's just confusing. Probably why they referred to it as "Beta."

I think his 3,710 was correct. I'm a little new to this, but it looks to me like his computer is still set to shift to a lower multiplier to conserve energy when it's not required to run balls to the wall. His Ortho is idle and multiplier is at 6 reading 2.473. If you add another 50% (shifting the multiplier from 6 to 9 for a full load), then you end up at the 3,710 mark. I have not disabled that feature in BIOS yet either so I see it often.

[Seolfor]

You know what? I think you're absolutely right!
Thanks for correcting me on that. I have that feature disabled in bios, so I've never seen that before. The reason that I thought the readings were off is because I have my FSB set to 1.6ghz and my multiplier is 8 instead of 9. So, CPU-Z will report 3.2ghz while Orthos is reporting 3.6ghz.

Kenofstephen, I apologize for misinterpreting your screenie, and I want to congratulate you on having an excellent overclock. Good job!

[Nazu]

User Name: Nazu
Stability: Orthos 13h small fft's

CPU name: E6600
OC: 3600MHz
Stepping: 6 B2
Week: L629
Code: A530
Vcore: 1.47v

Cooling: air
Cooler brand/model: Sunbeam Tuniq Tower

Motherboard: DFI P965-S Dark
Bios Version: 6.00PG
Operating System: XP 32

RAM brand: G-Skill
RAM rated speed: PC6400
RAM actual speed: 800MHz
Latency: 4-4-4-12

[Taffer]

You know what? I think you're absolutely right!
Thanks for correcting me on that. I have that feature disabled in bios, so I've never seen that before. The reason that I thought the readings were off is because I have my FSB set to 1.6ghz and my multiplier is 8 instead of 9. So, CPU-Z will report 3.2ghz while Orthos is reporting 3.6ghz.

Kenofstephen, I apologize for misinterpreting your screenie, and I want to congratulate you on having an excellent overclock. Good job!

Wow...someone said I was write (ok, I meant right, but that was how I originally typed it...i'm leaving it, that's just funny!) and it's in print even! Where's the screenshot button at?

I have not turned off that feature yet, and I'm not sure I will. I usually leave my computer turned on so the power saver may be a good option. Besides a command or two when your computer is idle, or while fully active, how much of a difference does it really make? Does it improve performance enough to really make it worth running full speed 24/7? Either i'm not being as anal about every clock cycle as others are, or I'm missing something obvious?!?

Screw it...if all else fails, i'll just sit here staring at my avatar again. That's always a good passtime.

[NLight95]

User Name: NLight95
Stability: Orthos 17+ hours Small FFT, priority 3

CPU name: C2D E6600
OC: 3645 MHz
Stepping: 6, Rev B2
Week: L629
Code: A437
Vcore: 1.57v (@idle from uGuru)

Cooling: Air
Cooler brand/model: Tuniq Tower 120 (MX-1 thermal paste)

Motherboard: Abit IP35 Pro
Bios Version: m629b11 (07-09-07)
Operating System: XP 32

RAM brand: Crucial Ballistix Tracer
RAM rated speed: PC8500 (1066)
RAM actual speed: 1013
Latency: 4-4-4-12


ORTHOS:




OCCT 1 hour: http://i61.photobucket.com/albums/h5...ystemtest2.jpg

AquaMark3 200,030: http://i61.photobucket.com/albums/h5...Aquamark-1.jpg

[PsYkHoTiK]

User Name: PsYkHoTiK
Stability: Prime95 Small FFTs

CPU name: C2D E6850
OC: 3950 MHz
Stepping: G0
Week: L723
Code: A057
Vcore: 1.50v load no vdroop

Cooling: Water
Cooler brand/model: Dtek FuZion CPU

Motherboard: Asus P5K Premium
Bios Version: 0204
Operating System: Vista Ultimate 32bit

RAM brand: OCZ Reaper HTC
RAM rated speed: PC8500 (1066)
RAM actual speed: 1054
Latency: 5-5-5-15

http://valid.x86-secret.com/show_oc.php?id=227164

Prime95 28 hours (small FFTs):



Reapers died shortly after. Will try to push some more when I get em back from RMA.

[r4st4m4n]

Wow...someone said I was write (ok, I meant right, but that was how I originally typed it...i'm leaving it, that's just funny!) and it's in print even! Where's the screenshot button at?

I have not turned off that feature yet, and I'm not sure I will. I usually leave my computer turned on so the power saver may be a good option. Besides a command or two when your computer is idle, or while fully active, how much of a difference does it really make? Does it improve performance enough to really make it worth running full speed 24/7? Either i'm not being as anal about every clock cycle as others are, or I'm missing something obvious?!?

Screw it...if all else fails, i'll just sit here staring at my avatar again. That's always a good passtime.

Generally, people turn it off to make sure it doesn't make the system unstable. But if it is stable with it, better leave it