@eva2000...thanks for posting the bios settings and links. I was having trouble getting the board stable at your same "exact" settings with the 0505 bios and I think it was b/c of the fluctuation in Vcore. 1.525 Vcore in the bios was dropping to 1.36v in Windows with the 0505 bios. I switched back to the 0402 bios and Vcore doesn't go below 1.39v.
My "everyday" settings w/ my P5W64 were 350x11 at 1.52v (in Win). I'm priming at that speed now w/ the Striker. So far so good.
Intel Xeon 3520 | eVGA Classified E759, GTX-285 SSC Tri-SLI | Corsair Dominator GT 2000Mhz 7-8-7-20 | Auzentech X-Fi Prelude | Intel 160GB X25-MG2 x 2, WDC 1TB Green Storage | Watercool HK 3.0, GPU-X² GTX285, MO-RA 2 Pro | Mips Chipset Kühler | Dual Laing 18w DDC+ | Corsair HX1000 | murderMod TJ07 #007 | Dell 3008WFP | Windows 7 Ultimate x64 |
no probs.. updated my striker to 402 bios too since every man and his dog seems to be using it on strikerOriginally Posted by ShoNuff
@eva2000...thanks for posting the bios settings and links. I was having trouble getting the board stable at your same "exact" settings with the 0505 bios and I think it was b/c of the fluctuation in Vcore. 1.525 Vcore in the bios was dropping to 1.36v in Windows with the 0505 bios. I switched back to the 0402 bios and Vcore doesn't go below 1.39v.
My "everyday" settings w/ my P5W64 were 350x11 at 1.52v (in Win). I'm priming at that speed now w/ the Striker. So far so good.
---
Does anyone know why I keep geting a blue screen when in windows.
I get an error message saying Driver_IRQL_NOT_LESS_OR EQUAL.
Then says something about Stop: 0x000000D1
http.sys Address B43F8A50.
This is a clean install of XP, and I havent overclocked anything on the board apart from upped the voltage.
New PC Build
Intel i7 965 processor
ASUS Rampage 2 Extreme
6Gig OCZ Gold RAM PC 12800
BFG 295 Graphics card
Water Cooled, using Swifttech GTZ block
ASUS RAMPAGE 2 Extreme X58 Dual-Chip POM
ASUS RAMPAGE 2 Extreme X58 Mosfet
Western Digital 300GB SATA II VelociRaptor (OS Disk)
Samsung Spinpoint F1 1TB
Seagate 1.5TB SATA II Barracuda
Galaxy 1000Watt PSU
sounds like ram settings.. before installing winxp always memtest your memory and ensure system passes memtest
---
Ahh, now I understand. $250 P5W DH is the budget model. You have to pay $400 to get memory subtimings in the BIOS.
0402 seems to be the best for now finally getting my chip over the 4.6 wall I was hitting on my previous boards...this isnt stable just a high CPUz validation...
http://valid.x86-secret.com/show_oc?id=149488
Never empower an idiot with a response....
http://en.wikipedia.org/wiki/Troll_%28Internet%29
Seller/Buyer Reputation:
Heatware: http://www.heatware.com/eval.php?id=50905
Ebay: {Family Account} Kasyg3 http://myworld.ebay.com/kasyg3/
Ebay: {My personal Account} Sdumper http://myworld.ebay.com/sdumper/
iTrader: http://www.blazingpc.com/forum/itrader.php?u=28
Posting Permissions
Reply With Quote
Bookmarks