in this post http://www.xtremesystems.org/forums/...d.php?t=126027I have modified the vcore of the striker the voltage regulator is indentical adp3189
with striker enough a trimmer 100/50k regulated to 21k… as the resistance on the striker to pin the 4 is here 822ohm with 21k you have 790ohm
with mod now you setting in the bios 1,9volt yuo have 1,91v
the vdroop is not neccesary is on 0,01-0,02v fully load with conroe 6800
Bookmarks