12.500 sec 1M on air cooling

[Extera]

Not the fastest, but a nice result on air.

Setup:
Asus P5B deluxe unmodded
E6600 W28B + Tuniq tower 120
OCZ Platinum XTC PC8000 2x 512mb
Tagan 480watt
Ati X1600pro

Ambient was +-18*C


4100Mhz on multi 8 fsb 513mhz mem 1:1 @ 4-4-4-4
Vcore 1,65v set in bios (+- 1,6v real)

more info/short story on my website --> project --> E6600 under tuniq


Single stage and LN2 results coming later

[Saiyan[CHW]]

Exelent for air, congrats.
What's your time on 2M?

Regards.

[DAK1640]

Wow....very, very nice indeed...

[Turrican]

very nice results, congratz

[Extera]

Thanks.

Only tried 1M
maby i'll try max screenshot tomorrow.

after that it's back to sub-zero

[Cordovader]

Congrats

Is your limit on air? Mine (same step) tops out at 4100mhz too:



I have an almost identical config (P5B Dlx w/o mods, Tuniq...).

I can do 4200mhz max screenshot (see sig) so you should do almost the same if not more

Tell us how is it going subzero, i´m planning to put it on SS in a few days & i´m curious to see how much can scale

[Extera]

I will try 4:5 divider and multi 9 to.
my mem can do that speed 4-4-4-4 didn't think about that (you memspeed is very nice, aswell as your cpu )

4100mhz is my absolute limit, not a single mhz (fsb) higher.

off course I will post single stage and LN2 results here.
this will be my first time useing LN2.

[DeToNaToR.cl]

Try Switching the theme for Windows XP Luna, is faster than classic mode.

My score also in air with a similar configuration.. ~20ºC ambient

[TaPaKaH]

12.5s on air is but some guys (like me) were able to sub12s on air

[dinos22]

12.5s on air is but some guys (like me) were able to sub12s on air

sub is key

to SUB-zero air temps

[Revv23]

a race then eh?

*open's window*

Who wants to have a race for best aircooled pi on 8x multi?

[dinos22]

a race then eh?

*open's window*

Who wants to have a race for best aircooled pi on 8x multi?

where are you from?

Alaska?

[TaPaKaH]

Who wants to have a race for best aircooled pi on 8x multi?

Will think about it...
it`s not that cold here ATM

[dinos22]

Will think about it...
it`s not that cold here ATM

what are you complaining about

you want some of Sydney weather your way

[xlink]

what are you complaining about

you want some of Sydney weather your way

but you're only a quick hop from antarctica...

[dinos22]

but you're only a quick hop from antarctica...

LOL

[Extera]

I opened the window this morning, I will be home in about 12 hours, I'm happy when its 15*C with this weather in Holland.

Maby mem @ 570mhz 4-4-4-4 timings using 4:5 divider like posted about can bring me sub 12s.
I hope my mem can do that without mods. Thinks its on the edge of its limits @ 2,45v in bios.

Else I will grab my solder irion and mod the mod.

[dinos22]

15C.........even in Sydney we'll have 15C nights every now and then lol

[Martijn]

I opened the window this morning, I will be home in about 12 hours, I'm happy when its 15*C with this weather in Holland.

Maby mem @ 570mhz 4-4-4-4 timings using 4:5 divider like posted about can bring me sub 12s.
I hope my mem can do that without mods. Thinks its on the edge of its limits @ 2,45v in bios.

Else I will grab my solder irion and mod the mod.

It's too hot over here to have some real benching going on... Nice overclock!!

[Dumo]

Congrats Xtera Awesome clock there..

Heres comparo with N680 board...

[Extera]

looks like 965 (with crappy fsb straps booting at 500mhz) is quite good compared with 680i, your busspeed is a slower, but your memspeed is awesome (thats one of 680i stongest points for spi now I think) is 2,5vdimm real? or missread from software?

maby i'll put vdimm and vcore mod on the board tonight. I need to go to my girlfriend first. Outside temp are way above "normal" here in holland, last it was arround 0*C outside, now its +10*C!

[Dumo]

Yep, 2.5 Vcore in bios.
Sorry, I'm not trying to hijack your thread, but this N680 board with FSB >1700 actualy ran slower...

[DStealth]

I have flat 12.000 sec.

air cooled - ambient temps /opened window/ ~10-13*
1.55v set in bios Tt BT and weak 120mm fan.I have now better one and these days will try to go unter 12 seconds.

[kiwi]

dinos22:
Believe me you don't want -30C It is only good for benching. Even your nasal mucus/snivel or how do you call it freezes in your nose

DStealth:

Does you B chip get too hot at 1.5V+? I wish I could run 1.525 3.8ghz stable but temps get above 85C and cpu starts throttling. Running 3.7Ghz 1.45V now

Here is my max at 10-15C ambient

[tiborrr]

Moonman's first run on his new e6600... Crappy ram is holding him back.