Now that the NDA is gone here is the first impression of the EVGA NForce 680i SLI Motherboard
A big thanks to EVGA Europe and to AquaPC
The board is a Nvidia 680i reference card - made by NVidia to EVGA, a preferred lunch partner
In this first part, I will show you a few pics, Bios screens and first results
I'm still using a HD that I have used with a board with Intel chipset that not allow to fully use NTune..
Setup:
- EVGA NForce 680i SLI Motherboard
- E6700 ES B1
- Tuniq Tower 120
- TeamGroup 5300
- Seasonic 600w
Board just out of the box
Mounted with Tuniq Tower
Some bios screens - a few suprises
General Menu
Now a very nice feature - the board have 2 separeted PLL's : one for CPU FSB, other for memory speed - so they can be controled and raised independently
Memory timmings :
And now some voltages :
VCore up to 1.8V - very cascade friendly
VMem up 2.5V
VCPU FSB
The board allows also to contro many more voltages.
Finally temperature monitoring (hope can read very low temps)
And now the first results - still with limitation of non clean Window with no nTune to raise FSB
4Ghz ar cooled, so easy - 1st try :
More FSB, and memory speed in "Unliked" mode - in this case at 1100Mhz 4-4-4-12
More memory bandwith with much less CPU speed ( latest version of CPU-Z still not read memory speed and timmings)
The 3 slots PCI de 16X are really asking me that I mount the 2 EVGA's 8800GTX in SLI
More results with the next few days - SLI and real cold comming
To be continued ..
This is Pedro Rocha over and out
Bookmarks