Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
good job man!
well i hope the dfi is a nice board when the kinks are worked out!
LOL!
hehe I am looking forward to the 4x4 progress!!!
AMD X2 3800+
DFi LANPARTY UT NF590 SLI-M2R/G
2 x 1Gb Crucial PC8500 [Anniversary Heatspreaders ]
Custom Watercooling on the way
Thermalright XP-90 right now
27" 1080p HDTV for monitor
Originally Posted by The Inq
thank you
with the dfi board theres a bug with getting over 300htt with the 800mhz mem div.. you have to boot @ like 296 but in windows you can use clockgen to get the rest also it sets the mem timings too tight so use systool to relax things. i usually run winmemtest to test settings in real time
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
AMD X2 3800+
DFi LANPARTY UT NF590 SLI-M2R/G
2 x 1Gb Crucial PC8500 [Anniversary Heatspreaders ]
Custom Watercooling on the way
Thermalright XP-90 right now
27" 1080p HDTV for monitor
Originally Posted by The Inq
they're some timings only systool can get to and thats the problem im having with the 4x4 setup. there are no tools except memset and ntune that work with 4x4 but i need control like systool till i can do anything mem clocking wise the highest i creep to is 1100mhz this board subtimings and drive strengths are wrong and to tight for high clocking d9s. or maybe asus will make a bios with the timings or a mod bios will come along
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
got my 2nd cpu installed but old betsy cant hang on every time i pushed 3ghz it would shut down this thing sucks juice so to get proper benches im gonna have to get a new psu. my pcpower 510 put up a good fight all these years but ima have to let her go.
i got a eye for that 1600w ultra psu this should be good till 16cores rolls around
i did find a work around though i dropped the cpu volts to 1.35v htt to 1.2v and shut of any onboard things i dont use,so im inching towards 3.1 maybe.post screens later
btw i got 17538mbs with this sucker in sandra
Last edited by msimax; 08-25-2007 at 02:51 PM.
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
gotta love numa
Asus Crosshair III
Phenom X2 550@X4
Cooler Master V10
2x2gb G-SKILL DDR3
ASUS HD 4890 Top
Antec 850w
WD 500gb
WD 80gb
8 cores is gonna be nasty
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
Last edited by msimax; 08-25-2007 at 04:49 PM.
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
they have my next baby
http://enthusiast.hardocp.com/articl...50aHVzaWFzdA==
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
so if people wanted a 24/7 setup, is it possible to set these apps on startup values?
and lets see some benches with those babies
btw i look forward to abusing your dfi as soon as i get my WC setup Just searchin around for the deals. also how did you read temps on it? core temp restarts the pc and smart guardian isnt on the driver cd? is ntune accurate?
Last edited by EvlUndrWareNome; 08-25-2007 at 05:34 PM.
AMD X2 3800+
DFi LANPARTY UT NF590 SLI-M2R/G
2 x 1Gb Crucial PC8500 [Anniversary Heatspreaders ]
Custom Watercooling on the way
Thermalright XP-90 right now
27" 1080p HDTV for monitor
Originally Posted by The Inq
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
AMD X2 3800+
DFi LANPARTY UT NF590 SLI-M2R/G
2 x 1Gb Crucial PC8500 [Anniversary Heatspreaders ]
Custom Watercooling on the way
Thermalright XP-90 right now
27" 1080p HDTV for monitor
Originally Posted by The Inq
smart guardian and coretemp are good ones SG IS on the disk
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
i just noticed thats 4.2billion% efficiency on the ram
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
AMD X2 3800+
DFi LANPARTY UT NF590 SLI-M2R/G
2 x 1Gb Crucial PC8500 [Anniversary Heatspreaders ]
Custom Watercooling on the way
Thermalright XP-90 right now
27" 1080p HDTV for monitor
Originally Posted by The Inq
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
I love this thread!!
msimax how much more you think can be squeezed from that QuadFX setup?
Is 20GB/s possible when new PSU will arrive?
Good work !
RiG1: Ryzen 7 1700 @4.0GHz 1.39V, Asus X370 Prime, G.Skill RipJaws 2x8GB 3200MHz CL14 Samsung B-die, TuL Vega 56 Stock, Samsung SS805 100GB SLC SDD (OS Drive) + 512GB Evo 850 SSD (2nd OS Drive) + 3TB Seagate + 1TB Seagate, BeQuiet PowerZone 1000W
RiG2: HTPC AMD A10-7850K APU, 2x8GB Kingstone HyperX 2400C12, AsRock FM2A88M Extreme4+, 128GB SSD + 640GB Samsung 7200, LG Blu-ray Recorder, Thermaltake BACH, Hiper 4M880 880W PSU
SmartPhone Samsung Galaxy S7 EDGE
XBONE paired with 55'' Samsung LED 3D TV
ran my new cooling and trying out winxp64,man i wish i had a new psu now i wonder how many are going to make the switch on the 10th
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
Where is your K10?
Last edited by tictac; 08-29-2007 at 10:50 PM.
Last edited by msimax; 08-30-2007 at 12:07 AM.
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
im making a request to anybody who knows how to make small programs to adjust memory settings for amd setups to pretty please make one for dual socket setups.
i use memset and ntune but recently found out it only changes timings for cpu 0
while cpu 1 remains unchanged.
and if any knows of a way to edit ami bios stock memory timings to relax them and set the drive strengths to weak would be very helpful
these timings would be good for the app.. and if you need any info dumps just let me know
PHP Code:
DRAM Configuration Settings:
Memclock Tri-Stating............. - Disabled
Memory Hole Remapping............ - Enabled
Auto Optimize Bottom IO.......... - Enabled
DRAM Drive Strength.............. - Level 12
RAM Drive Weak/Normal Mode....... - Auto
CLK Enable Drive Strength........ - Auto
Chip Select Drive Strength....... - Auto
MEM Address Drive Strength....... - Auto
MEM Clock Drive Strength......... - Auto
Memory Data Drive Strength....... - Auto
Data Strobe Drive Strength....... - Auto
CS/ODT Pin Fine Delay............ - Auto
SLI-Ready Memory................. - Disable
Timing Mode...................... - Manual
Memory Clock Value/Limit......... - 400Mhz
Command Per Clock (1/2T)......... - Enable
CAS Latency Control (Tcl)........ - 003 CLK
Min RAS Active Time (Tras)....... - 005 CLK
RAS to CAS Delay................. - 004 CLK
Row Precharge Time (Trp)......... - 003 CLK
RAS to RAS Delay (Trrd).......... - 003 CLK
Row Cycle Time (Trc)............. - 011 CLK
DIMM 1 Row Refresh (Trfc0)....... - Auto
DIMM 2 Row Refresh (Trfc1)....... - 105 ns
DIMM 3 Row Refresh (Trfc2)....... - Auto
DIMM 4 Row Refresh (Trfc3)....... - 075 ns
Read Precharge Time (Trtp)....... - 003 CLK
Write Recovery Time (Twr)........ - 005 CLK
Read to Write Delay (Trwt)....... - 004 CLK
Write to Read Delay (Twtr) ...... - 003 CLK
Refresh Period (Tref)............ - 03.9 us
Max Asynch Latency............... - 006 ns
Bank Interleave.................. - Enabled
DRAM On-Die Termination.......... - 075 ohm
Read Delay From Rx FIFO.......... - 2.5 CLK
Read/Write Queue bypass.......... - 08 time
Bypass Maximum................... - 04 time
32 Byte Granularity.............. - Auto
Idle Cycle Limit................. - 04
Dynamic Counter.................. - Enable
Read DQS Skew.................... - Auto
Last edited by msimax; 09-02-2007 at 05:08 PM.
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
Bookmarks