do anyone know the 3dmark wr on a gf2 card?
i clocked my gf2 from 175 to 320mhz (-60c phase cooled)but i have not run any 3dmark yet.
what driver is the best fo my card btw?
do anyone know the 3dmark wr on a gf2 card?
i clocked my gf2 from 175 to 320mhz (-60c phase cooled)but i have not run any 3dmark yet.
what driver is the best fo my card btw?
celeron!!
Are you talking about '01? I think one of the older 2x.xx or 3x.xx drivers.. I forgot the exact numbers it's been so long.
You should be more concerned with memory clocks, not core clocks. GF2 was very bandwidth-starved.
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60Originally Posted by CompGeek
My old Geforce 2 GTS Pro did 310 core on stock cooling, and 433 on the ram, so you've got a long way to go :P
Did you check the ORB?
I guess me and a friend have the current WR in the Geforce2 Class
We scored 8605 with a GF2 Ultra
compare link
AMD Opteron 146 @ 2706MHz(300x9) | MSI K8N Neo2-54G w/vcore mod | 2x256MB G.Skill PC4800LA @ DDR600 CL2.5-3-3-8 1T | Geforce 2 Ultra w/vGPU + vDDQ + booster wire mod @ 410/545Mhz | CPU cooled by Zalman CNPS7000-CU | GPU cooled by custom phase-change (-40c load) WouterAerts / Syngrow Team Boxmèr
I still feel sorry for that GF2 and my old FX5700
My Rig:
Intel Core 2 Duo E6400
2x512mb Micron PC3200 OEM D9DQW "Fatbody"
Biostar TForce P965 Deluxe
MSI/Medion GeForce 6700XL (Cheap )
Chieftec 360W (in search for someting better)
WD 160GB S-ATA
i guess i have a pretty bad card then :P
it´s only bad sdram who wont go over like 180mhz.
o dont think my vmod worked so well i tryed from 2v on core till 5v but it probebly don´t worked :P
nice 3dmark result you got SynGroW what mods and what is the stock klocks on your card?
celeron!!
I dont think any GF2's came with SDRAM. Only GF1's.
All along the watchtower the watchmen watch the eternal return.
stock was 250/400 I believe
here are the vmods. However for the wr run I made the mem feed directly from the 3.3v line
http://www.xtremesystems.org/forums/...ad.php?t=75585
San diego @ 3.2Ghz 1.5v(mcw6002)
DFI NF4 SLI-DR Expert
ASUS 7600GT SLI
2x256mb bh6 @ 266mhz 2-2-2-5
antec 430w
i have a geforce2 mx200 but i think its sdrams on it but i´m not 100% sure.
its 32mb anyway and i got tv out on the card
some pics:
gefoce2(-60) GF2(175mhz@323mhz)
celeron!!
how much volt is your vgpu at? mx200 is probably sdram
San diego @ 3.2Ghz 1.5v(mcw6002)
DFI NF4 SLI-DR Expert
ASUS 7600GT SLI
2x256mb bh6 @ 266mhz 2-2-2-5
antec 430w
OFFTOPICOriginally Posted by STEvil
Do you still have the pics of the voltmods you did on your GF1 DDR ?
OFFTOPIC
Where courage, motivation and ignorance meet, a persistent idiot awakens.
http://www.madshrimps.be/gotofaqlink.php?linkid=1795
i tryed this mod whit a trimpot @0,5 ohms,and it vill give 5,5v what i´ve understand...
i don´t understan the forumula totally but i can messure the v core if i take one probe to ground ande one to the middle pin (vout 3) ?
or can i else feed the core direct from my psu 3,3v rail?
Last edited by Gebba; 11-08-2006 at 08:08 AM.
celeron!!
pm me if you are interested
San diego @ 3.2Ghz 1.5v(mcw6002)
DFI NF4 SLI-DR Expert
ASUS 7600GT SLI
2x256mb bh6 @ 266mhz 2-2-2-5
antec 430w
lol... that GF2 didn't know what hit it!
frankenstein gf2 :P
San diego @ 3.2Ghz 1.5v(mcw6002)
DFI NF4 SLI-DR Expert
ASUS 7600GT SLI
2x256mb bh6 @ 266mhz 2-2-2-5
antec 430w
Bookmarks