Heres a screenie of CPUZ showing that my dualy is only running on single. Its at stock speeds since i recently reformatted and i reset bios too. I installed every relevent update on the AMD site but i cant figure out what else to do. Any ideas?
Heres a screenie of CPUZ showing that my dualy is only running on single. Its at stock speeds since i recently reformatted and i reset bios too. I installed every relevent update on the AMD site but i cant figure out what else to do. Any ideas?
ThermalTake Matrix case
Thermaltake TR-2 430 Watts
Abit KN8 Motherboard
AMD 4200 X2 2.2ghz @2.4ghz
2GB Mushkin Extremeline DDR PC3200
1x 80GB Maxtor EIDE(boot Drive)
1x 80GB Western Digital SATA
ATI X850XT PE
The Prices are right, its because im canadian.
Not too familiar with your motherboard, but sometimes you have to get a newer bios that allows for dual core, and in the bios you may have to enable dual core (kind of like enabling hyperthreading).
i7-2600k L041C108 4.8ghz 1.32v PLL off Venomous-X Push/Pull http://www.xtremesystems.org/forums/...postcount=1063
Asus P8P67 Vanilla
Samsung 30nm MV-3V4G3D/US 2x4GB @ 9-10-10-28 1T DDR3 2133 1.6v http://www.techpowerup.com/forums/sh...d.php?t=159320
Diamond HD 7970
WD 600GB Velociraptor
Corsair TX750W
CM 690 II Advanced
Q822A549 E8500 @ 4.5ghz air TRUE @ http://www.xtremesystems.org/forums/...d.php?t=203762
G.Skill F3-12800CL6D-4GBXH @ 7-10-8-27 1T DDR3 2133 1.6v http://www.xtremesystems.org/forums/...d.php?t=266839
thats odd because when i first got it i poped it in without a reformat or anything from my A64 3000 and it worked, once i was in windows i installed the AMD optimization and the dual core drivers and it worked and showed as dual core. Now no matter what i do it shows and single which sucks because now im not getting what i paid for
ThermalTake Matrix case
Thermaltake TR-2 430 Watts
Abit KN8 Motherboard
AMD 4200 X2 2.2ghz @2.4ghz
2GB Mushkin Extremeline DDR PC3200
1x 80GB Maxtor EIDE(boot Drive)
1x 80GB Western Digital SATA
ATI X850XT PE
The Prices are right, its because im canadian.
Are you using the newest version of Cpuz,Your Bios, If you look under divice manager under teh computer tab what does ti say is installed the multiprocessor our the uniprocessor ?
E6420 @ 8x499 (Clock Gen After That)
P5K Deluxe (Looking for mods to get me over 530 FSB)
2x1gig Ballistix 600Mhz @ 5-5-5-10 2T
Corsair 620hx
Evga 8800gts 320mb @ 676/1050 Vgpu@ 1.45v Vmem @ 1.9v
it says -Processors
|_AMD Athlon 64 X2 Dual Core Processor 4200+
and also says -Computer
|_ACPI Multiprocessor PC
ThermalTake Matrix case
Thermaltake TR-2 430 Watts
Abit KN8 Motherboard
AMD 4200 X2 2.2ghz @2.4ghz
2GB Mushkin Extremeline DDR PC3200
1x 80GB Maxtor EIDE(boot Drive)
1x 80GB Western Digital SATA
ATI X850XT PE
The Prices are right, its because im canadian.
Yet it still performs like a Single core and shows as single core in Task Manager
ThermalTake Matrix case
Thermaltake TR-2 430 Watts
Abit KN8 Motherboard
AMD 4200 X2 2.2ghz @2.4ghz
2GB Mushkin Extremeline DDR PC3200
1x 80GB Maxtor EIDE(boot Drive)
1x 80GB Western Digital SATA
ATI X850XT PE
The Prices are right, its because im canadian.
go to your device manage , expand computer and tell us what you see there ?
is this winxp home version ?
-Computer
|_ACPI Multiprocessor PC is what it shows me in device manager as i stated before.
Its Windows XP Professional
ThermalTake Matrix case
Thermaltake TR-2 430 Watts
Abit KN8 Motherboard
AMD 4200 X2 2.2ghz @2.4ghz
2GB Mushkin Extremeline DDR PC3200
1x 80GB Maxtor EIDE(boot Drive)
1x 80GB Western Digital SATA
ATI X850XT PE
The Prices are right, its because im canadian.
sorry about that , i overlooked your follow up posts
did you try this thread ?
http://www.xtremesystems.org/forums/...ad.php?t=81429
i just tried using that tutorial and none of it did anything.
ThermalTake Matrix case
Thermaltake TR-2 430 Watts
Abit KN8 Motherboard
AMD 4200 X2 2.2ghz @2.4ghz
2GB Mushkin Extremeline DDR PC3200
1x 80GB Maxtor EIDE(boot Drive)
1x 80GB Western Digital SATA
ATI X850XT PE
The Prices are right, its because im canadian.
Bookmarks