Wanna see EVEREST 37.9ns RAM delay with 2GB DDR2....???

**camouflage** · 10-20-2006, 02:43 PM

Here we go - CPU is on water (not chilled !!!) - board is P5W64-WS PRO with 0301 BIOS and the RAM is the one and only CELLSHOCK 1000 at 2.71 Vdimm:

This is my personal record !

**ozzimark** · 10-20-2006, 02:47 PM

heh, not bad. keep in mind that conroe has awesome prefetching that greatly reduces latency.. i'll see what i can do on my AM2 in a bit if you'd like to have a competition

**camouflage** · 10-20-2006, 02:53 PM

Originally Posted by ozzimark

heh, not bad. keep in mind that conroe has awesome prefetching that greatly reduces latency.. i'll see what i can do on my AM2 in a bit if you'd like to have a competition

You are the winner of the bandwidth competition on AM2.......

**ozzimark** · 10-20-2006, 03:04 PM

Originally Posted by camouflage

You are the winner of the bandwidth competition on AM2.......

not with a single core. bandwidth sucks without dual, interestingly enough

**camouflage** · 10-20-2006, 03:08 PM

Oh - You're still on single core. Did not recognize this fact, sry.

So You are right mate - but on AM2 I could bet You are soon on quad core......

**ozzimark** · 10-21-2006, 11:41 AM

heh, here's a relatively modest run. you should be able to beat me by cranking the mhz on that ram some

**SMa** · 10-21-2006, 12:01 PM

So we're going to see some competition?

I'll try too if I find some time!

**ozzimark** · 10-21-2006, 12:29 PM

looking forward to seeing it

my ultimate goal is to break 30ns. i need some crazy cold temps to get my cpu that fast though

**nn_step** · 10-21-2006, 12:34 PM

why not drop your CPU multi, since you have that option with AMD without a hit in latency

**ozzimark** · 10-21-2006, 12:39 PM

Originally Posted by nn_step

why not drop your CPU multi, since you have that option with AMD without a hit in latency

what exactly would that do for me? it's not like i can get lower than cpu/5 for the memory ratio..

**nn_step** · 10-21-2006, 12:51 PM

Originally Posted by ozzimark

what exactly would that do for me? it's not like i can get lower than cpu/5 for the memory ratio..

meh, true. But that isn't going to be a problem for K8L

**camouflage** · 10-21-2006, 01:40 PM

Originally Posted by ozzimark

heh, here's a relatively modest run. you should be able to beat me by cranking the mhz on that ram some

But You have 2x512.............

**ozzimark** · 10-21-2006, 01:45 PM

Originally Posted by camouflage

But You have 2x512.............

if size matters, i'll run 2x1gb or even 4x1gb for you

all right. same mhz with 2x1gb. tightened up a few other timings to get a slightly better score

**fhpchris** · 10-21-2006, 04:01 PM

Originally Posted by ozzimark

what exactly would that do for me? it's not like i can get lower than cpu/5 for the memory ratio..

LOL got ya there NN_Step! Have you been using conroe that long

**Kasparz** · 10-21-2006, 05:48 PM

My lowest was about 32.6ns on s939 in winter. That was with CH5 UTT.
But i guess DDR pwn DDRII in latency tests

**ozzimark** · 10-21-2006, 05:54 PM

Originally Posted by Kasparz

But i guess DDR pwn DDRII in latency tests

i'm nowhere near maxing out these sticks, i'm at a cpu limitation

lowest i can do is 30.5ns

**Zardokk** · 10-21-2006, 05:54 PM

Lol. The best I'm getting right now is 50.4ns with my plain old DDR 500. DDR2 does have bandwidth/latency advantage to some extent just because it clocks higher. I'll see how fast I can get this RAM. I've done 290MHz before, which should provide a nice score.

**erwinz** · 10-21-2006, 06:36 PM

WOW great latency..

when will intel use a MC.. mm..

Thread: Wanna see EVEREST 37.9ns RAM delay with 2GB DDR2....???

Thread Tools

Search Thread

Rate This Thread

Display

Wanna see EVEREST 37.9ns RAM delay with 2GB DDR2....???

Bookmarks

Bookmarks

Posting Permissions