super SUBZERO Aircooling THREAD

[esdee]

This is on Tforce, default vcore, TT BT. Nomally temp showing around 30 idle, 40 full load. Everything was placed near window just to test if I can get sub zero cpu temps on air It was like -20C outside. Max oc was +100-200Mhz but temps went up to around 10C idle because of higher vcore

your temp reading is very weird, 127*C is -128*C on the DFI!!

[Fr3ak]

Thats an error. I get the same value when I try to use smartguardian with boards, it doesnt support.
He used it to display voltages I guess.

[kiwi]

It is biostar Tforce not DFI, and it only supports cpu temperature and some voltages

[charlie]

lol... this is great.

Anyone who catches pneumonia benching outside gets special props.

[zakelwe]

lol... this is great.

Anyone who catches pneumonia benching outside gets special props.

That is actually closer to the truth than you think. This is my record from last year, 1.4C ambient

http://www.aocb77.dsl.pipex.com/cold.JPG

When you bench all night actually in low temps the cold really sinks into your bones.

Regards

Andy

[Sume4]

That is actually closer to the truth than you think. This is my record from last year, 1.4C ambient

http://www.aocb77.dsl.pipex.com/cold.JPG

When you bench all night actually in low temps the cold really sinks into your bones.

Regards

Andy

You have to drink A LOT of rhum and make a bonnfire on your room/balcony/whatsoever. I hope(or not) we get some -30 celcius on next winter here in the southern finland so i could try some aircooling again or place the watercooling radiators on to the open window. C2D gets beating after that.

[bazx]

i built this for benching a year ago it has a 1200 btu aircon unit which pushes the air throw the upper chamber in a closed loop the oc chamber gets down to around -10

http://www.net7.info/1/beer/03.jpg
http://www.net7.info/1/beer/02.jpg

[CaNNibaL]

Nice job man :O
Awesome !

[gianni-gt]

wow... top!!!

[flesheatinvirus]

Im currently using a 6" round high CFM blower with a flexible 90 degree elbow to pump cold air when its avalible through my main rad on the water system which works excellent and provides cold air for everything else in the system as well. I got in the Thermalright HR03 sink for my X1900XTX so this weekend its going on for testing, hopefully the temp here will drop down a little as its been in the low 70s the last few days. Once we get some colder weather I will throw some pics up.

[camouflage]

Being that it's ALREADY getting cold in a lot of places...

Let's assemble pics and screenies of some super COLD Aircooling OC'ing.

If you can... please include a pic of a thermometer showing ambient.

According to Your SIG all the chips I killed in the past 5 years have been shouting out loud:

TE MORITURITAE SALUTANT !!!

[camouflage]

This is on Tforce, default vcore, TT BT. Nomally temp showing around 30 idle, 40 full load. Everything was placed near window just to test if I can get sub zero cpu temps on air It was like -20C outside. Max oc was +100-200Mhz but temps went up to around 10C idle because of higher vcore

-20°C in October........... - where do You live, Northpole....

[Turrican]

@ bazx
That looks awsome

[charlie]

lol... I'd like to see some of our Russian members in the freekin' tundra with snow blowing by the rig at about 45mph and -40C

C

[Supertim0r]

wait a month or two and ill give you -30/-40c outside bench

[charlie]

wait a month or two and ill give you -30/-40c outside bench

we need a snowman smilie

[TaPaKaH]

-20°C in October........... - where do You live, Northpole....

Nope, that was last winter. In January , I guess. All local overclockers enjoyed that winter because it was very very cold (me too - look @ 1st page )

[funkflix]

Hope for a few days with around -10 to -15°C here too! Then i will go outside with my rig immediately!

With my Opteron 146 it was no fun.. i tested it ones, close to the open window, with about -5°C outside, but this CPU had a really horrible coldbug.. +14°C @ 305MHz HT..

[camouflage]

Hope for a few days with around -10 to -15°C here too! Then i will go outside with my rig immediately!

Yeah - on the Zugspitze or in the higher Alpes. I'm in Germany, too and weatherforecast says 19°C - but in the positives......

Think You have to wait a bit longer than "a few days".........

But romours say if we have such a mild October here there will be a lousy cold & dry Jan & Feb...., good ambient for outdoor experiments.

[funkflix]

Yeah - on the Zugspitze or in the higher Alpes. I'm in Germany, too and weatherforecast says 19°C - but in the positives......

Think You have to wait a bit longer than "a few days".........

But romours say if we have such a mild October here there will be a lousy cold & dry Jan & Feb...., good ambient for outdoor experiments.

U interpreted it wrong..

I mean a few days in upcoming winter, with this kind of ambient temps.

[SMa]

But romours say if we have such a mild October here there will be a lousy cold & dry Jan & Feb...., good ambient for outdoor experiments.

Let's hope so!
My rig can use some cold

[camouflage]

Yeah - I always love to see my case fans stop spinning frozen to its frames....

[Sume4]

Youd just need for example zalman 7700 for your subzero experiments because the heatpipes doesnt work that well on those conditions.

[camouflage]

Youd just need for example zalman 7700 for your subzero experiments because the heatpipes doesnt work that well on those conditions.

No - watercooling mixed up with enough Vodka in the circuit.....

[EZClock]

I had a bench session with 9c ambients were blown into a case using a box fan . Here's a picture from the daytime, I have the 9c shot somewhere, I will try to find it. Here's my best result I could pump out of my E6700;