super SUBZERO Aircooling THREAD

[sirheck]

By sirheck


By sirheck

This is with the ambient temps around 25c.

[zillaoc]

Here's a shot of my freeze box...

Yes thats a cooking thermometer pushed though the side lol...

[pentium777]

Here's a shot of my freeze box...

Yes thats a cooking thermometer pushed though the side lol...

heres more shots > http://bittforums.com/f18/my-freeze-box-5776/

Here's some shots of the rad that blew up after freezing solid "last two pics"
http://bittforums.com/f18/my-new-radiator-5471/

CRT monitors LOL

[zillaoc]

CRT monitors LOL

That shot is 3 years old lol. I have a hannsG 22 wide currently and an NEC 2nd crt

I have been looking into buying a widescreen crt actually, but their really expensive

[sammurai]

My old E6600@4428mhz

[loonym]

It's still cold enough here in Maine to reap the benefits of some very nice fresh air. I'll try and post numbers tomorrow night. Simple setup, 6" flex duct and the 6x12 universal flange, 2-12cm side fans draw in lots of air. I may add a 6" duct fan to push later.

[erickwok]

It's still cold enough here in Maine to reap the benefits of some very nice fresh air. I'll try and post numbers tomorrow night. Simple setup, 6" flex duct and the 6x12 universal flange, 2-12cm side fans draw in lots of air. I may add a 6" duct fan to push later.

wow! air duct cooling

[rgkpt]

wow! air duct cooling

i agree

[Franco_64bits]

Cool

[ben rogers]

when i first moved here this E2200 clocked at 3000MHz with 1.392v was at 9c and 10c on each core....now it has gotten hotter however but it was at the aforementioned temperatures for a good five hours - the 120mm fan on the ninja was facing and very close to a pretty cold wall and sucked very cold air in from it.

[Rom Hacker]

In Portugal it´s impossible to get temps. near -5º in Winter,but at 0ºit´s(Common temp. in WInter) possible to get pretty clocks (Or NoT)

[imapwnu]

i'll be doing some crazy aircooling this weekend with some older hardware, but it sure as hell wont be subzero cause its 90+ F out

[maneta]

In Portugal it´s impossible to get temps. near -5º in Winter,but at 0ºit´s(Common temp. in WInter) possible to get pretty clocks (Or NoT)

If you go to covilhã in a good winter U can get -3º

[JameCa]

ok wait untill januari

i'll be overclocking in the winter here in sweden -15c

[hitek420]

Almost subzero temps here in Ontario, Canada
1.5°C is the lowest temperature my indoor/outdoor thermometer has registered so far.
It will soon be time to drag the box out into the garage and see what she will do with some cold air.

[catawalks]

What program is that?


EDIT: Nvm, I found it. If anyone else was wondering its 8rdavcore.

[Slovnaft]

YES winter is here and i get to benefit from living in New England for ONCE!!

But on another note, i just started using the supercold HFCs in compressed air cans for occasional spot-cooling while benching, and it seems to work great. Anyone done this slash know any potential problems with this? I spray it all over vreg circuits and heatpipes and whatnot.

[charlie]

It's just about that time of year again...

I'd like to see a pic of someone benching outside in some parking lot in Norway or something... with a thermometer @ -40C

[fragmasterMax]

Here in Boston, my room was basically a side thought of the contractor, and is surrounded on three sides by windows. It should make for some nice benching once i get my i7 setup.

[James_8970]

I can't wait for -45/-50 in January. I live in winnipeg (aka Winterpeg, if you live in canada), should prove for some interesting results when I toss my RAD outside and crank up the volts on my i7.
James

[Evil_AnAnAs]

This is my air OC . Going to buy some delta fans and one more TRUE and go for the WR .
Some one might see that the hold down for the cooler come from one of kingpins LN2 pots .

[Cluster]

I can't wait for -45/-50 in January. I live in winnipeg (aka Winterpeg, if you live in canada), should prove for some interesting results when I toss my RAD outside and crank up the volts on my i7.
James

I know what ya mean, im in calgary and no stranger to -40 and under.

I'm actually in the process of rigging up my air duct, currently my ambient case temp is 16c, incoming air is 9c. Can't wait for January

[mongoled]

This is my air OC . Going to buy some delta fans and one more TRUE and go for the WR .
Some one might see that the hold down for the cooler come from one of kingpins LN2 pots .

Now thats xtreme welcome dude

[Indignity]

At what point do you guys worry about condensation? I realize that things work differently when you introduce cold to a cold environment, but I was under the assumption you still has risk of condensation.

If all is cool, I might just throw one of my rigs in my window well of the basement

[zillaoc]

I've never had any condensation what so ever, so long as the box I use stays closed.

If its open and the aimb air temp goes up then the waterblock gets a little moist.
I usually shut the whole thing down and let it sit for a while before opening. Then when starting up from a warm state I run the water pump and fans until the inside of the box and water temps are the same and at their coolest.

Been running like this with various mobos/setups for a few years now. Never had a issue. "other than cleaning and replacing the intake filters once and a while"