That's a topic I wait the whole year for to be revived again!
Some nice stuff and some major ghetto mod!
That's a topic I wait the whole year for to be revived again!
Some nice stuff and some major ghetto mod!
MalkbookII Asus G1S Notebook | C2D T7500 rev. G0 @ 2.2GHz 1.000v (undervolt) | 2Gb DDR2 667 5-5-5 | GeForce 8600M GT 256Mb @ 500/800 | 15" LCD @ 1680x1050
EeePC EeePC1000HA | 2Gb Ram | 160Gb HD | 10.2"
Malkserver ECS 650I SLI mobo (crappy, crappy mobo) | E2160 @ 2.250 1.2v | 2Gb DDR2 800 @ 1000 5-5-5 | Asus 8400GS @ 800/1800/435
hi everybody...this is my first post...but not my first OC I love ari cooling at low temperature.... this is my last winter OC of d945 on my balcony at 2°....very very beatiful sensation...this is the rig
http://img209.imageshack.us/img209/8...estajb4al0.jpg
http://img143.imageshack.us/img143/4...cinosz7dk9.jpg
http://img444.imageshack.us/img444/5...cataqx5vk7.jpg
http://img514.imageshack.us/img514/5...neonts1ii9.jpg
and this the result
http://valid.x86-secret.com/show_oc.php?id=163076
Looking at weatherchannel.com it looks like we should have some good results v.2007 coming soon
I love this time of year also. Great Getto window rigs are born yet again.
Temperatures are going to to falling into low 30's high 20's this winter in the bay area
For super SUBZERO I'm use — http://forums.topmods.net/viewtopic.php?t=1664
of course nothing of "superb" or "extreme", i just wanted to share it.
Although it was pretty warm outside (+8 when i did benching) today, i decided finally to put the rig near the open window and to look for what good it will give me.
Boxed cooler managed to maintain my presscot's hot behavior very well :o
http://valid.x86-secret.com/show_oc.php?id=280490
it wasn't the limit, i reached even 200 fsb(4600), but it BSODed then in a few secs. 1M could be run on up to 4450+ mhz.
Voltage is set to 1.7, mobo's maximum. If sensors on it are correct, it's actually 1.62v or about that... i should do a Vdroop at last.
Ain't too bad for a boxed cooler coupled with one of the hottest intel's cores ever made, isn't it?
where? in the center of the photo? it's a BMW i guessWTF! LADA???
damn thats serious stuff there.. dont you worry about condensation messing up your hardware or its too cold on top to even worry about that?
ps i dit a couple of runs with my opty last week at around -20celsius and the temps wont go bellow 18c under load.. crappy heatsinkfan + the fact that the heatpipe dont work properly under cold..
Here it goes some subzero aircooling bench (about -4ºC):
(bios didn't read under 30ºC I don't know why. Actually it was 12ºC using core temp at 4Ghz 1.26V and mobo temp was 3ºC).
|| Core 2 Quad QX6850 ES @ 3.5Ghz 1.35V || Thermalright Ultra 120 || Asus P5K3 Deluxe || Gskill F3-12800CL7D-2GBHZ
|| XFX 8800GTX || Dell 2005FPW 20" || Ultra X-Pro 750W LE || 3 x WD 320GB SD + 1 x Hitachi 500GB
I haven't done a sub-zero aircooling bench in a long time Maybe I'll try it again this year.
Dear Members,
Can you expane what is ''super SUBZERO Aircooling''....
what is differt with general AIR Cooling?
when system is OUT-OFF-CASE? am i right?
Team Xtreem DARK - F.A.Q. - 8 vs 6 Layer
The thread is mainly about overclocking in environments where ambient temp is below 0C.
Was about -10C here yesterday but I don't dare to try or I'm too lazy (+ my balcony is so ing small it's just a pain in the ass).
Last edited by RPGWiZaRD; 01-06-2008 at 04:16 PM.
Intel? Core i5-4670K @ 4.3 GHz | ASRock Extreme6 Z87 | G.Skill Sniper 2x8GB @ DDR4-1866 CL9 | Gigabyte GTX 970 OC Windforce 3x | Super Flower Titanium 1000W | ViewSonic VX2268wm 120Hz LCD | Phanteks PH-TC14PE | Logitech MX-518 | Win 7 x64 Professional | Samsung 850 EVO & 840 Pro SSDs
If all people would share opinions in an objective manner, the world would be a friendlier place
Well today it was like -12c in N. VA. here are some pics and my 3dmark06 benchmark...
http://service.futuremark.com/compare?3dm06=4794264
I hate the cold, so I used and air purifier and just put it outside my window with the drier vent inside, comp stayed nice and cold, and really didnt get very cold in my room. Nice alternative to water cooling for the time being, but you sure cant beat the looks of a nice setup...Hopefully coming soon!
Nice work from Krampak and v1pwred ..
Regards
Andy
Got a little bored the other night so I cracked open a window. Nothing special, sorry about the coretemp frequency, I forgot to hit refresh.
http://img204.imageshack.us/img204/8874/temp1lx6.jpg
Hmm there was a fortnight here with really low temps about a month ago (about -15c average, went to -27c once at night though..) but I guess it was too cold for me :o) Last year the temperature didn't go below 10c, now -30c... nice ^^ Screw the global warming ^^
Mobo: Gigabyte P35-DS3P Rev2.0
CPU: QX9650 @ 4ghz
Video: Sapphire HD4850
RAM: 4GB G.Skill PC8000 (2x2GB)
HDD: WD 640GB AAKS
PSU: Tagan 650W
Audio: Creative Audigy 2 + Stereo sound Yamaha
ModReactor - The Bulgarian site for PC Modding, Hardware, Overclocking, Guides, Reviews and Projects
damn its like never sub zero in Australia, maybe once or twice during winter at 3am in the morning. Gotta wait 4-5momths till winter
Nice work v1pwred!
Q6600 G0 @ 3.0Ghz (333x9)
OCZ XTC SLI 4GB 800mhz 5-5-5-5-18
Gigabyte GTX 460 OC 768mb @ 715/900/1430
Intel SSD G2 80gb
Western Digital Caviar green 500gb
Western Digital caviar black 1tb
Western Digital Caviar black 1tb
Thermalright Ultra 120 Extreme + Scythe S-Flex 1200RPM
Fractal Design Arc Midi
Gigabyte P35-DS4 rev 2.0
Corsair HX 620W.
Well, I've been reading these forums for a long time but heres my first post.
Here's my q6600 4.0@1.69v on 680i LT SLI board with 680i p30 BIOS (for more volts) ThermalRight Ultra 120 Extreme.
Kevin
Last edited by kcaverly; 02-16-2008 at 09:54 PM. Reason: reduced confusion
Wow, your feeding that Q6600 a lot of volts to get that 4.0 lol
OK
I was dailying my Q6600 at 4.0 1.75 set for a few months now. and that was on a water setup idling 60C loading 85C, and that was a huge insane loop not any sort of CPU optimized isolated loop with a big heat dump from nearly every component (CPU, 2 G80s, NB, SB, 2 HDD). it was overnight prime95 stable
I'd expect way more than 4.0ghz for -120C cooling
Do you phase daily or something? If so id run at least 4.5 or so it can take it
Last edited by imapwnu; 02-15-2008 at 11:59 PM.
E8400 @ 4.8Ghz on Vapochill LS | NVIDIA 790i Ultra SLI | BFG GTX 280 SLI | PC Power & Cooling 1200W | Bench Sled
Not true -120 C
ThermalRight Ultra Extreme heatsink with a 120mm Fan. The processor temp is actually about 35C under load.
I notice your using the XFX p31 BIOS, do you find its better? If so why?
Right now I'm use the EVGA p30 BIOS and it doesnt seem as stable as my old BIOS, but gives me more volts for a run like that.
Edit: The XFX p31 BIOS has FSB holes in bad places for me. I see you're clocked @ 3.6, and that was the highest I could go on the XFX BIOS unless I jumped right up to 4.0, The eVGA BIOS let me tweak it in that area but was garbage for any mhz at all over 4.
Kevin
Last edited by kcaverly; 02-16-2008 at 09:51 PM.
Bookmarks