What IC in crucial tenth anniversary ddr667?

[kemist]

Hey, just wondering if anyone knew what ic these use:
http://www.crucial.com/store/partspe...2KIT12864AA663

[MACMAC]

Hey, just wondering if anyone knew what ic these use:
http://www.crucial.com/store/partspe...2KIT12864AA663

It's definately D9, not sure which exactly, but they are good IC's.

In the 3DGM review, it hit 800Mhz 3-3-3-10 @ 2.4V

In the BCCHardware review, it hit 824Mhz 3-3-3-12 @ 2.35V

The only issue with this ram is the price, ungodly expensive!

[khurios2000]

D9DQT according to this site
http://forum.lowyat.net/index.php?showtopic=298646
Micron BT-3, B6-3

but again not really sure if crucial put better IC with that aniversary heatspreader

[Pyr0]

d9gmh, i have a kit
$230 doesn't seem to much
http://www.newegg.com/Product/Produc...82E16820148017

[Exedy]

Pyr0,

are this rams capable 1000 @4-4-4-5 2.3/2.4v?

[khurios2000]

d9gmh, i have a kit
$230 doesn't seem to much
http://www.newegg.com/Product/Produc...82E16820148017

does this kit also have D9GMH?
this kit

[Pyr0]

Pyr0,
are this rams capable 1000 @4-4-4-5 2.3/2.4v?

4-4-4-8 = 2.3V

does this kit also have D9GMH?
this kit

yes

[MACMAC]

d9gmh, i have a kit
$230 doesn't seem to much
http://www.newegg.com/Product/Produc...82E16820148017

I was referring to Crucial's MSRP, but Newegg's price is quite reasonable

[khurios2000]

yes

lucky me, bought a used kit last night for 200 bones

[Jodiuh]

I managed 800 3.3.3.12, but needed 2.4V for it. AFA cosmetics, it's nice to see all modules touching tape, then spreader. They're kinda purty too.

[nicepun]

Pyr0,

are this rams capable 1000 @4-4-4-5 2.3/2.4v?

Yes, they can do 1000Mhz @ those timings.

D9GMH



Newegg no longer has them and ChiefValue is OOS.

[Dredd]

Mine won't boot at cas4 but will boot and run stable at 5-4-4-12 DDR2-1000 2.3v even 2.4v didn't give me cas4 and I'm unwilling to go higher so I left well enough alone. Still hella good as it's cheaper than buying any DDR2-800 and hoping to do 1000 with similar timings.

I did also notice newegg removed the listing (they had stock earlier today though) and I just got mine so I must have ordered at the right time.

edit: Maybe my board undervolts and I should try higher than 2.4? I have no mods to it. What do you think? worth it to try 4-4-4-x DDR2-1000?

or just don't touch it? I do have a 60mm fan blowing on them

[nicepun]

Mine won't boot at cas4 but will boot and run stable at 5-4-4-12 DDR2-1000 2.3v even 2.4v didn't give me cas4 and I'm unwilling to go higher so I left well enough alone. Still hella good as it's cheaper than buying any DDR2-800 and hoping to do 1000 with similar timings.

I did also notice newegg removed the listing (they had stock earlier today though) and I just got mine so I must have ordered at the right time.

edit: Maybe my board undervolts and I should try higher than 2.4? I have no mods to it. What do you think? worth it to try 4-4-4-x DDR2-1000?

or just don't touch it? I do have a 60mm fan blowing on them

Try this:




So in order: 4-4-4-10-4-35-10-10-10-10 and the other settings exactly the same. I hope this helps.

Set vdimm @ 2.45v and see if you get it going.


Check with I did with a P5B Deluxe WiFi:

[Dredd]

Thanks but it won't post even at 2.45v and those settings. But 2.25v (in bios) boots at 5-4-4-8-4-35-10-10-10-10 But as soon as I set cas4 it won't boot at anything past 800Mhz.

[Revv23]

Thanks but it won't post even at 2.45v and those settings. But 2.25v (in bios) boots at 5-4-4-8-4-35-10-10-10-10 But as soon as I set cas4 it won't boot at anything past 800Mhz.

what bios?

[Dredd]

what bios?

0711

I know there's a newer revision. DO you think I should get it?

[Pyr0]

try 4-4-4-12-5-35-4-10-5-13
what are your voltage settings for nb, sb etc.

[Dredd]

try 4-4-4-12-5-35-4-10-5-13
what are your voltage settings for nb, sb etc.

No go even at 2.45v even 4-6-6-18 is no good *shrug* I've tried NB/Sb/iCH at max volts and it still wouldn't post at cas4 DDR2-1000. I probably have a set that just won't do it

I'm even running the latest BIOS 804 and no change. Oh well I did manage to boot at 5-4-4-4-4-35-10-10-10-10

edit: Now I got it to boot with 804 bios and 1.7v on the NB and 1.6v on the SB 2.4v on memory (tried this with 711 I think and no go)

DDR2-1000 4-4-4-8-5-35-10-10-10-10 why would I need so much voltage on the NB/SB?

[Jodiuh]

How high can you guys go @ 3?

[Dredd]

How high can you guys go @ 3?

3-3-3-12 @ DDR2-800 with 2.35v was ok here

[Rone]

D9DQT according to this site
http://forum.lowyat.net/index.php?showtopic=298646
Micron BT-3, B6-3

Crucial's Tenth Anniversary modules are not even mentioned on that page...
Besides, D9DQT is no longer in production.
They use D9GMH (B6-3) which can be found on my DDR2 RAM List.

but again not really sure if crucial put better IC with that aniversary heatspreader

They do. The ICs used on Tenth Anniversary DIMMs are handpicked by Crucial.

[Dredd]

I maxxed my voltages on the FSb termination, NB, SB, and ICH (running 2.3v on memory) to boot 4-4-4-12-5-35-10-10-10

Gonna run memtest

[SkyGod]

damn I was just about to order this stuff from newegg and all the sudden they aren't carrying it I just I'll go back to the dominator 6400c4 (same IC's) the crucial at the price was a steal.

[Dredd]

damn I was just about to order this stuff from newegg and all the sudden they aren't carrying it I just I'll go back to the dominator 6400c4 (same IC's) the crucial at the price was a steal.

Unfortunately it's probably limited edition and won't be available again. I think Crucial should consider re-releasing it under a different name as a high performance overclock friendly part. Something similar to the mushkin redline or Dominator series. If they can make sticks that do DDR2-1000 at cas4 and they're rated for 667 that's amazing results. Especially at the price they retailed for (MSRP is $311.99 at crucial.com now)

[SkyGod]

well thats to bad I'm kicking myself for not ordering the other night I had them in my cart at the egg, and I figured i would just wait (I haven't yet decided on all the components for my new rig) I thought to myself, if I wait worst thing that will happen is they will get cheaper... no dice you snooze you loose, lol

** this is not my day, the egg doesn't have the 6400c4 dominator up anymore either they had it up a few weeks ago then took it down, then put it back up earlier this week.