Need help on settings for Crucial PC2-5300

[bdrex28]

I'm looking for the best timings for my ram.

I have the Crucial Ballistix BL2KIT12864AA663 (2x1024) DDR2667

MOBO: Asus P5B-Deluxe/WiFi
CPU: E6600 (running stock settings)

Right now it's at 2.2v

it's coming out at 333.3mhz 4:5 3-3-3-12

Current settings in bios are as follows:

Memory Remap: Disabled
Configure DRAM by SPD: Disabled
DRAM CAS# Latency : 3
DRRAM RAS to CAS# Delay: 3
DRAM RAS# Precharge: 3
DRAM RAS# Activate to Precharge: 12
DRAM Write Recovery Time: 4
DRAM TRFC: 35
DRAM TRRD: 10
Rank Write to REad Delay: 10
Write to Precharge Delay: 10


Any advice would be helpful and much appreciated.

Thank you in advance!

[GoriLLakoS]

What chips exactly ?D9DQT?

I yes try 2,7V

and via memset
3
2
2
1
15.6
0T
5
23
9
9
6
4
4
that's the tightest you can achieve if the chips can handle the volts and have fatbody chips

if you can't give more than 2.2V try to puchase a DDR Maximizer..:P

[bdrex28]

How can I tell what chips?

Here's the link to them:

http://www.crucial.com/store/partspe...2864AA663#info

[GoriLLakoS]

Υοy got to remove the HS

[bdrex28]

ok, I'll try that a little later.

[LordofDoom]

Be careful when doing it...

[bdrex28]

Yea, I'm really not wanting to take off the HS's . I was hoping someone would have the RAM and recommmend some timings, etc.