Got this board today. Any links to the vcore mod, if available?
Thank you
Got this board today. Any links to the vcore mod, if available?
Thank you
Everyone PM hipro
hehehe i did that a while ago.Originally Posted by G H Z
he said they'd be released soon enough!
FB is pin4
NO SHI(f)T...........NOT AGAIN for God's shake!.......DON'T UPLOAD something that you HAVEN'T EVEN tested......You have burned some people's AOpen mobos like this in the past PLUS mine that I've spent $450 and now it is sitting here burned......SO PLEASE NOT AGAIN......Originally Posted by hicookie
OK.......I'll upload the VCore mod in a few minutes (to picture it first).....I don't want to see any burned down mobos......
Last edited by hipro5; 10-12-2006 at 04:37 AM.
INTEL PWA FOR EVER
Dr. Who my arss...
.........
OK...........Here you go......
Locate this IC......
......AND this spot.....one side of the capacitor......
Solder on this side of the capacitor to GROUND an 100KOhms 25 turns trimmer and trimm it to it's MAX resistance (100KOhms)....
INTEL PWA FOR EVER
Dr. Who my arss...
.........
Would penciling this IC increase the vCore too?Originally Posted by hipro5
It might yes or no......I haven't tested with pensil mod.....As a matter of fact, I never had to do a pensil mod.....Originally Posted by SLi_dog
INTEL PWA FOR EVER
Dr. Who my arss...
.........
lol, sorry , masterOriginally Posted by hipro5
yup , i have not tested yet, sorry for this, i won't ever do that again, and 2th sorry for last time on aopen.
btw,i think everyone expect ur ultimated mods,things like u did last time on ic7max3, and ct479.lol
Hicookie, what resistor value should be used?
woot woot!
any more mods that you've published hipro?
Thanks hipro, I will try this shortly
vdimm and vmch / chipset mods for AW9:
vdimm:
vmch: (to the right of the upper PCI-E 16x port)
Both mods will give approx. +0.1V when soldered in.
I have tried them both myself
"In mild doses, ethylene produces states of euphoria, associated with stimulus
to the pleasure centres of the human brain."
Intel benching: 3DMark Vantage: E69642, P37253, H30363, X22138
Swedish Overclocking Champion 2006 - Celeron Mobile 1400 @ 4243MHz - 203%
Nice pics, thanks for the mods crotale
I can verify that the vcore mod is working.
Here is also a read out for the vmch, along with a vmch booster mod. (either ends of the thick wire)
The booster mod is engineered by Hipro, all credit goes to him!
"In mild doses, ethylene produces states of euphoria, associated with stimulus
to the pleasure centres of the human brain."
Intel benching: 3DMark Vantage: E69642, P37253, H30363, X22138
Swedish Overclocking Champion 2006 - Celeron Mobile 1400 @ 4243MHz - 203%
I assume the smaller wire is going to something you have setup so you can read the vmch voltage w/o having to flip over the board. Am I correct?Originally Posted by crotale
I'm new to the modding scene. I'm just wondering what kind of wire that is, I've decided to finally put my soldering iron to good work but I'm still in awe of all the info out there.Originally Posted by crotale
That specific one is just a wire from an MOLEX -> SATA power cable, but any one will do... The thicker the better.Originally Posted by Digerati
"In mild doses, ethylene produces states of euphoria, associated with stimulus
to the pleasure centres of the human brain."
Intel benching: 3DMark Vantage: E69642, P37253, H30363, X22138
Swedish Overclocking Champion 2006 - Celeron Mobile 1400 @ 4243MHz - 203%
Success! Booster mod and Vfsb mod. This was my first time modding a board. Booster was very simple. Its been a while since I soldered but I think they came out OK. There is a little too much bare wire showing but it should be ok. Vfsb mod was a little scary but after reading Thrilla's awesome guide I was a little more confident. Now I just need to find the sweet spot and finally let this e6700 run wild
If anyone was wondering, not only can you use the read point for voltage, but GURU also has Vfsb labeled as "CPU VTT 1.2 Voltage"
And a few pics
Anyone know the safe range for voltage? GURU starts buzzing at 1.45v which is like 1.39-1.4 actual. Thanks for the guides great work!
Last edited by SilveradoJ442; 01-06-2007 at 03:22 PM.
Originally Posted by crotale
guys,
I would have need to arrive to 3V max on the vdimm, it's possible with this mod or could be of the problems?....which is the max sure voltage that i can set with this mod?
thanks and sorry for English
[Moderator on memoryeXtreme] :thumbsup:
Wohoo! Thanks for the great MODs! How much does the MCH Booster mod increase the voltage? Is the booster Mod just the thick wire and no other modification?
Seems very simple to do for me!
Offtopic: Does the mainboard undervolt the mch? Now I'm at 425 MHz FSB with 1,9V MCH. 430 MHz --> blackscreen --> increased voltage to 2V --> still blackscreen. Does the MCH mod helps here or should I wait for another BIOS?
Bookmarks