E6300 Retail Box Max Overclock

[OPPAINTER]

What is the common max overclock for the Core2 Duo E6300 chip?

I'm talking stock cooling, straight out of the box?

Thanks.

OPP

[Dumo]

Heres...Probly not maxed yet



Edit: With TT Big Typhoon.

[OPPAINTER]

Nice clock, I saw that thread

I'm testing a 6300 at work with an Asus P5W DH.
The 6300 seems to want to do more but it is stuck on stupid around 430x7 1:1. I get memory problems going past 430. Is the Asus just the problem? Looks like Dumos Gigabyte does 500 fsb with ease.

OPP

[Dumo]

Same here

This is rig for work with 6300 and Giga S3 (with new C2 chipset)...Got it from CompUS..

[OPPAINTER]

Same here

This is rig for work with 6300 and Giga S3 (with new C2 chipset)...Got it from CompUS..

Would you recommend the board? What don't you like about it?

OPP

[Dumo]

Would you recommend the board? What don't you like about it?

OPP

Yes, for the price from Newegg etc....Not from CompUS.

Its ok for daily rig.

[OPPAINTER]

Yes, for the price from Newegg etc....Not from CompUS.

Its ok for daily rig.

If I go over to Frys and pick up the S3, what are the chances I will get the C2 chipset? If it's another chipset, will the board suck?

http://shop2.outpost.com/product/492...H:MAIN_RSLT_PG

OPP

[Dumo]

Heres C1...http://www.xtremesystems.org/forums/...highlight=dumo

Heres C2 ser#0636...Came with F3 bios and I flashed to F5....

[OPPAINTER]

Thanks, this helps a lot

So I need to find a box that has the 0636 in the serial#.
Then I need to flash to F5.

Correct?

OPP

[Dumo]

Thanks, this helps a lot

So I need to find a box that has the 0636 in the serial#.
Then I need to flash to F5.

Correct?

OPP

Yes

[OPPAINTER]

OK then, the hunt is on.

I'm out of here

Thanks,

OPP

[AgonxOC]

Where can I get the board with the S3, DS3, with the C2?


Alex

[OPPAINTER]

Where can I get the board with the S3, DS3, with the C2?


Alex

Good question.

I just bought an S3 at PCClub, only to find out it was a C1 version.

OPP

[taemun]

Christ my E6600 isn't capable of those clocks

t

[BulldogPO]

My E6300 with Asus P5W DH:
http://kotisivu.dnainternet.net/bull..._3m34.125s.png

[Marvin_The_Martian]

My e6300 with watercooling on ds3 c1.

With stock boxed cooler did 3.5 1.35v but temps were to high to my liking
Might need some off your experienced people to help me max it out when I get phase

Edit: small difrence in mhz due to ram crapping out quicker then cpu.

[ssabripo]

Heres...Probly not maxed yet



Edit: With TT Big Typhoon.

Dayum Dumo!! Nice job, specially on stock air cool!

can you bost your BIOS settings? (Vcore, Vdimm, NB, SB, etc, etc).

thanks!

[ssabripo]

My E6300 with Asus P5W DH:
http://kotisivu.dnainternet.net/bull..._3m34.125s.png

geezus...all you guys getting some nice numbers!

what was your BIOS settings? Also, what did you use for your memory? 1:1 or 4:5? did you use ddr2-800 or ddr2-1000 or what?

[GoriLLakoS]

@dumo I had an S3 0636 and with the F5 bios i can't pass 440 fsb....i can boot at 440...but no go after..

[BulldogPO]

My memory was 3:4

[itznfb]

my S3 does 500FSB with +.2NB +.1FSB, increasing voltage i made it to 570FSB. stability issues due to passive cooling and crappy active cpu cooling

[ssabripo]

My memory was 3:4

did you use the following?

PCI f = 100
Vdimm = 2.1
Vcore = 1.48
FSB core = 1.4
NB core = 1.55
SB core = 1.7


if not, could you post what you used? that's what I'm shooting for (3.1ghz) and I dont wanna mess up a 3rd board

[GoriLLakoS]

The Vcore and the Vdimm , depends to your stuff..!

Try PCI-F over 115 to achieve bigger FSB!

@itznfb your mobo has the c2?

[ssabripo]

I have similar stuff to Bulldog: P5B deluxe wifi, 2x1gb Crucial Baliistix PC6400, Scythe Infinity + fan, e6300, etc.

that's Why I asked, to compare my last settings (before the board went bad) to his and see where the differences lie.

[itznfb]

@itznfb your mobo has the c2?

i'm honestly not sure, i'll check when i get home