check what i found in my mail box
done by epox
thnkz for the pic AP.Versteeg
check what i found in my mail box
done by epox
thnkz for the pic AP.Versteeg
[
Hey Peter, long time no talk
Looks nice!
Dinosaurs are chortling.
Lian Li PC1200B, Custom Water Cooling, Lamptron FC5 Fan Controller w/ 4x 120mmx38 Deltas
i7 930 @ 3.8ghz, Rampage III Extreme, 12GB G.Skill PC2000, BFG 260GTXOC, PNY Quadro 380FX
(1) HP LP2475w 24", (2) Dell 2007WFP 20", Corsair AX1200 1200w, 3Ware 9650SE Raid
(2) 500gb Hybrid Seagate Raid 1, (2) 2TB WD Red NAS 64mb Raid 1, (5) 1TB Hitachi 32mb Raid 5
Originally posted by sysfailur
Hey Peter, long time no talk
sorry m8 busy
we must have a chat again
Looks nice!
[
This screenshot is made by Epox Taiwan and is done with a Canterwood mainboard 4PCA3+ and a unlocked P4 2.8GHz 800fsb cpu @ 1200fsb , cooled with normal watercooling.Originally posted by petervandamned
check what i found in my mail box
done by epox
thnkz for the pic AP.Versteeg
Prometeia-Li-Pro > sold
PrometeiAopen > sold
P4 2.8/800 Unlocked / EP 4PCA3+ / 4x256mb Corsair PC3500C2 / 2x WD Raptor / PC71 WC cooled. And Mach2-Lian-Li PC61
http://home.wanadoo.nl/a.p.versteeg/...ometeia-Li.htm
http://home.wanadoo.nl/a.p.versteeg/prom-li-pro
http://home.wanadoo.nl/a.p.versteeg/PrometeiAopen
Any specs on that Mobo? Its between that and the abit depending on voltage range! hopefully I can get 3.2v for my mem on the epox
Let the OC'ing begin!
I did a bit of searching and came up with this
http://www.thegoom.com/artikel/artikel.pl?artikel=91
shows some boards from cebit, The epox board has a VERY CLEAN layout around the socket however ive never seen a P4 socket turned that way and was wonder if my Prommy would mount the Epox board correctly?
Let the OC'ing begin!
yes the prommie will fitt, I have had a Aopen AX4R Plus granite bay with the same position of the P4 socket.Originally posted by WildKard
I did a bit of searching and came up with this
http://www.thegoom.com/artikel/artikel.pl?artikel=91
shows some boards from cebit, The epox board has a VERY CLEAN layout around the socket however ive never seen a P4 socket turned that way and was wonder if my Prommy would mount the Epox board correctly?
Prometeia-Li-Pro > sold
PrometeiAopen > sold
P4 2.8/800 Unlocked / EP 4PCA3+ / 4x256mb Corsair PC3500C2 / 2x WD Raptor / PC71 WC cooled. And Mach2-Lian-Li PC61
http://home.wanadoo.nl/a.p.versteeg/...ometeia-Li.htm
http://home.wanadoo.nl/a.p.versteeg/prom-li-pro
http://home.wanadoo.nl/a.p.versteeg/PrometeiAopen
do you know when the epox comes out?Originally posted by a.p.versteeg
yes the prommie will fitt, I have had a Aopen AX4R Plus granite bay with the same position of the P4 socket.
Damn I'm gonna have to look out for that board this summer
That's an unlocked processor running at 12x, so it's still impressive, but not as much as it would be at 15x.
BTW, a review is out at VR-Zone. Doesn't really shine considering it's the last one to get a review. Plus there are some issues with the use of CSA for the Broadcom GbE and oversaturation of the PCI bus with the four channel RAID. Doesn't take the world by storm in my book.
I havent seen an Abit review yet maybe i live under a rock or something i have the Abit tommorowOriginally posted by Dog_One
That's an unlocked processor running at 12x, so it's still impressive, but not as much as it would be at 15x.
BTW, a review is out at VR-Zone. Doesn't really shine considering it's the last one to get a review. Plus there are some issues with the use of CSA for the Broadcom GbE and oversaturation of the PCI bus with the four channel RAID. Doesn't take the world by storm in my book.
It wasn't the normal review. Prom did it in the Asusboards forum.Originally posted by toofast
I havent seen an Abit review yet maybe i live under a rock or something i have the Abit tommorow
Here's the link:
http://www.asusboards.com/forums/sho...threadid=42761
Bookmarks