how does it clock? theres a shop here in germany that sells pre tested 9500 cards that can be modded to 9700 cards. they have infinion 3.0ns bga memory, does anybody know how it clocks?
how does it clock? theres a shop here in germany that sells pre tested 9500 cards that can be modded to 9700 cards. they have infinion 3.0ns bga memory, does anybody know how it clocks?
My Infineon 3ns mem on my 9800 NP will only do about 330 max. But that's pretty damn good for a 9500.
Epox 8RDA v1.1 | Athlon XP 2100+ AIUHB 0301 @ 2205 mhz (200x11) @ 1.8v | Radeon 9800 NP @ 378/324 | 2x256 MB of Corsair XMS PC3200 CAS2 | Maxtor 80gig 5400 HD | Linksys LNE100TX | SLK-800 w/42.5 cfm Sunon 80mm fan | Antec SX830 w/Antec SL400 PSU
http://service.futuremark.com/compare?2k3=150558
Take a look at the memory speed... Not bad for a 9500Pro w/3nS Infineons.
nice jeff, any cooling on those? vmod?
its a 9500np btw
Jeff, how much voltage are you putting to the memory with the mod? And you did the vmod to the GPU also? What were you getting before the vmods on each?
Epox 8RDA v1.1 | Athlon XP 2100+ AIUHB 0301 @ 2205 mhz (200x11) @ 1.8v | Radeon 9800 NP @ 378/324 | 2x256 MB of Corsair XMS PC3200 CAS2 | Maxtor 80gig 5400 HD | Linksys LNE100TX | SLK-800 w/42.5 cfm Sunon 80mm fan | Antec SX830 w/Antec SL400 PSU
Hmmmm....seems like alot on the mem. How long do you think it will last? And you never checked it out before vmodding?Originally posted by Jeff
Vgpu getting around 1.85v and the memory around 3.2v to 3.3v. And I never ran this card stock so I'm not sure what it would have done unmod'd.
I can't stand doing mods w/o a baseline to see if/how much it really helped (although I sometime end up disappointed that way).
Epox 8RDA v1.1 | Athlon XP 2100+ AIUHB 0301 @ 2205 mhz (200x11) @ 1.8v | Radeon 9800 NP @ 378/324 | 2x256 MB of Corsair XMS PC3200 CAS2 | Maxtor 80gig 5400 HD | Linksys LNE100TX | SLK-800 w/42.5 cfm Sunon 80mm fan | Antec SX830 w/Antec SL400 PSU
a lot on the mem??? dunno if theres SUCH a big difference between bga nad tsop... i know a bunch of people who were running 4V through their tsop memory without any probs... def voltage of most tsop memory chips is 3.3 or even 3.5(etrontech)
Bookmarks