Asus P5W DH with GSKILL ram setup instructions and discussion thread

[QuietRiot]

I see that in F2-6400CL5D-2GBNQ BIOS screenshots Hyper Path is disabled. How come?

Is it better to run this RAM without Hyper Path?

[Lt_JWS]

F2-6400CL4D-2GBHK (1GB x 2)

@ G.S. tech

Would this ram possibly do 500mhz + @ 4-4-4-12 ?

Thanks G.S. tech...........................

[ondine]

hello,

it was my first overlock
i've got e6600 with Noctua NH-U12F and gskill HK and a PW DH DELUX

if i do fsb to 333

What i do for timing for this memory

thanks for avance

Ondine

[GSKILL TECH]

hello,

it was my first overlock
i've got e6600 with Noctua NH-U12F and gskill HK and a PW DH DELUX

if i do fsb to 333

What i do for timing for this memory

thanks for avance

Ondine

using
5-5-5-15-4-d-d-d

[ondine]

thank very much GS technician i test this week

best regards

ondine

[SOYLINDA]

Hello, I am new, I have a P5WDH and F2-6400CL5D - 4GBPQ:

It is possible to raise to me neither 400x8 nor 356x9

Like to have that to put the latencies to form and voltages?

Mch, Vmem, Vcore...

Thanks

My language is very poor

[GSKILL TECH]

Hello, I am new, I have a P5WDH and F2-6400CL5D - 4GBPQ:

It is possible to raise to me neither 400x8 nor 356x9

Like to have that to put the latencies to form and voltages?

Mch, Vmem, Vcore...

Thanks

My language is very poor

FSB400 1:1 is DDR2 800
FSB356 ?:? is DDR2 800 as well??
what voltage do you use.

[SOYLINDA]

1,9 v. In both cases. I have Vista home premium 64 bits.

Thanks

[SOYLINDA]

It seems that we are not understood.

I wanted to know if it is possible to do something with these memories
or if he is better to then give back them by RMA nonbonds, are fake

Thanks

[Pitbull]

My hz chip gave out on me after about a year :/
One of the 2 chips died but it had a great run entire time it did 475 4-4-4-12 @2.1 with no hickups untill one day it gave me some issues and 2 days later it died. Do you have any info on 4gb sets 2x 2gb, as i'm looking for upgrade now.

[MINIz guy]

Are there any updates with 2x2GB sets for the P5W DH Deluxe? I emailed G.Skill but I got no reply.

[kernelOfTruth]

Hi guys,

my cousin has the board too (like I) and wants to know if

F2-8000CL5D-4GBPQ

are supported (just the same like soylinda) either 4 GB or 8 GB

the should run at least with 800 MHz (6400) or 1000 / 1066 MHz if possible

thanks

[GSKILL TECH]

we don't have this motherboard on hand. but for sure DDR2 1000 F2-8000CL5D-4GBPQ is not going to run on p5wdh.

[kernelOfTruth]

thanks, G.S Technician

[ZeZ]

Hello

I would like to see the F2-6400PHU2-2GBHZ ---DDR2 800 4-4-4-12 2V
BIOS SETTING pictures.That's in the first post but the link is broken
Thank you in advance