Actually, it's AI Suite that was monitoring the VDimm, I just assumed that PC probe also reported the VDimm. Sorry for the confusion.Originally Posted by Moonrakerâ„¢
Mark
Actually, it's AI Suite that was monitoring the VDimm, I just assumed that PC probe also reported the VDimm. Sorry for the confusion.Originally Posted by Moonrakerâ„¢
Mark
Bench/Crunch Rig
i7-2600k
MSI P67A-GD65
ATI 6950x2
8 GB G.Skill Pi DDR3-1600
Xigmatech CPU cooler
Sparkle Gold 1250w PSU
Crunching Rig #2
Q-6600
Asus P5K-Deluxe WiFi
4 GB G.Skill DDR-2
ATI 4850
Tuniq Tower
24/7 rig
i-7 930
ASUS REII
ATI HD5850
Noctua CPU cooler
8 GB G. Skill Ripjaws DDR3-1600
Media Server Under Construction
E6750
Asus Maximus Formula
NVIDIA GT9500
4GB G.Skill Pi DDR2
Stock cooler
2xHitachi Deskstar 2TB HDD
hey moonraker, have you ever tried shooting for 402mhz FSB, the NB strap loosens there and you could gain alot more mhz, your NB might just be craping out between 390-400, and thats whats holding you back.
Im not 100% on that, but it may be worth a shot.
haha, ygpm buddy.Originally Posted by mhorgel
| Intel 2500K @ 5GHz | Noctua NH-D14 | Asus P67 Sabertooth | Samsung 2x4GB DDR3 @ 2133 MHz | Crucial M4 256GB | Asus GTX 770 OC | OCZ Fatal1ty 750W | Qnix QX2710
History: AXP-2400M, AXP-2500M, Core2 E6600 - all minimum 50% overclock
nice work.. keep it up
Core Quad Q9300
ASUS P5Q-PRO
4GB RAM
Ati Radeon 4890
Enermax Liberty 620w
is the new revision out? any improvements?
You guys that are getting temps in the high 30s and low 40s??? What kind of cooling are you using? I havent been able to get less than 50 c using stock or aftermarket. Right now I am using a Coolermaster Vortex TX and I still get 50s at idle. I am using artic silver 5 too. is there a better HS/Fan out there I should be using?
Man, this guide has helped loads. I have got past my 400FSB gremlin
Last edited by Moonrakerâ„¢; 09-23-2006 at 01:10 PM.
It was a long road and one that is now over. Behold the updatedrig:
NEC MultiSync LCD20WGX2 20.1" Widescreen // Antec P182 GunMetal // OCZ StealthXstream 700w // Gigabyte EP45-UD3P //
Q9550 @ 3.44Ghz // Tuniq Tower 120 // Gainward GTX260 (896MB) @ 580/900 // 8GB OCZ PC2-8500C5 (OCZ2P10664GK) //
60GB OCZ Vertex 2 // 600GB WD VelociRaptor (WD6000HLHX)// 1TB Samsung Spinpoint F1 (HD103UJ) // RED Saitek Eclipse //
3x Sanyo-Denki 102.5cfm 120x38mm fan // 1x Delta 80cfm 80mm fan in modified 5.25" bay "Flipped" Sunbeam Rheobus //
1x Antec Tricool 120mm fan // 1x RED Akasa System Exhaust fan // RED Sunbeam Meteor lights // RED Razer Diamondback //
OK. Here's my first posted overclock. I have most of my BIOS settings as in the op. I haven't figured out yet how to have multiple instsnces of CPU-Z running at the same time, I suspect you just have to have multiple copies in different folders. I'm covering up a mid 14's SPi 1M, everything else of interest is visible, except the fact that it's an E6600. I have 3.51 GHz stable (I have run Orthos for up to 3 hours, not 100% proof positive of stability I realize, but a good start), 3.6 GHz either flunked Orthos or had random restarts at all VCores up to 1.525. I'll get a better ss and post it later.
Mark
Bench/Crunch Rig
i7-2600k
MSI P67A-GD65
ATI 6950x2
8 GB G.Skill Pi DDR3-1600
Xigmatech CPU cooler
Sparkle Gold 1250w PSU
Crunching Rig #2
Q-6600
Asus P5K-Deluxe WiFi
4 GB G.Skill DDR-2
ATI 4850
Tuniq Tower
24/7 rig
i-7 930
ASUS REII
ATI HD5850
Noctua CPU cooler
8 GB G. Skill Ripjaws DDR3-1600
Media Server Under Construction
E6750
Asus Maximus Formula
NVIDIA GT9500
4GB G.Skill Pi DDR2
Stock cooler
2xHitachi Deskstar 2TB HDD
No need for copies/folders etc, just open cpuz again..
Hmmmmm...seems that when I've tried this, it returns a message saying that cpu-z is already running. I'll have to try it!Originally Posted by loc.o
Mark
Bench/Crunch Rig
i7-2600k
MSI P67A-GD65
ATI 6950x2
8 GB G.Skill Pi DDR3-1600
Xigmatech CPU cooler
Sparkle Gold 1250w PSU
Crunching Rig #2
Q-6600
Asus P5K-Deluxe WiFi
4 GB G.Skill DDR-2
ATI 4850
Tuniq Tower
24/7 rig
i-7 930
ASUS REII
ATI HD5850
Noctua CPU cooler
8 GB G. Skill Ripjaws DDR3-1600
Media Server Under Construction
E6750
Asus Maximus Formula
NVIDIA GT9500
4GB G.Skill Pi DDR2
Stock cooler
2xHitachi Deskstar 2TB HDD
Here's my best 100% stable oc for the time being. I am pretty much a noob at this, and I can probably do better with more time and learning more, but I am pretty happy with this as a first attempt. Most BIOS settings are as in the op, the NB, SB, and FSB voltages are all 1 step above default.
I tried 3.6 GHz at vcore up to 1.525, memory at 4:5 4-4-4-12, 4:5 5-5-5-15, and 1:1 4-4-4-12 and either flunked orthos or had random restarts. I may try to break the 3.6 GHz barrier again if I get brave enough to use more volts.
Mark
Bench/Crunch Rig
i7-2600k
MSI P67A-GD65
ATI 6950x2
8 GB G.Skill Pi DDR3-1600
Xigmatech CPU cooler
Sparkle Gold 1250w PSU
Crunching Rig #2
Q-6600
Asus P5K-Deluxe WiFi
4 GB G.Skill DDR-2
ATI 4850
Tuniq Tower
24/7 rig
i-7 930
ASUS REII
ATI HD5850
Noctua CPU cooler
8 GB G. Skill Ripjaws DDR3-1600
Media Server Under Construction
E6750
Asus Maximus Formula
NVIDIA GT9500
4GB G.Skill Pi DDR2
Stock cooler
2xHitachi Deskstar 2TB HDD
SWEEET!
I hit the *9 sweet spot yesterday! This is what I said to myself I'd be over the moon about and I am! - I think there may be room for some more too! (BEAR IN MIND I'M USING AIR THOUGH!)
http://valid.x86-secret.com/show_oc?id=125528
VCore: 1.4875
VDimm: 2.1v
FSB Term: 1.4v
NB: 1.45v
SB: 1.60v
Temps are 40°c CPU and 31°c MOBO.
It was a long road and one that is now over. Behold the updatedrig:
NEC MultiSync LCD20WGX2 20.1" Widescreen // Antec P182 GunMetal // OCZ StealthXstream 700w // Gigabyte EP45-UD3P //
Q9550 @ 3.44Ghz // Tuniq Tower 120 // Gainward GTX260 (896MB) @ 580/900 // 8GB OCZ PC2-8500C5 (OCZ2P10664GK) //
60GB OCZ Vertex 2 // 600GB WD VelociRaptor (WD6000HLHX)// 1TB Samsung Spinpoint F1 (HD103UJ) // RED Saitek Eclipse //
3x Sanyo-Denki 102.5cfm 120x38mm fan // 1x Delta 80cfm 80mm fan in modified 5.25" bay "Flipped" Sunbeam Rheobus //
1x Antec Tricool 120mm fan // 1x RED Akasa System Exhaust fan // RED Sunbeam Meteor lights // RED Razer Diamondback //
having C1E enabled during 400FSB and overvolting the CPU may cause instability (for example sudden restarts and so on)?
Intel C2D E8400 @ 4000MHz ~1,192V
Thermaltake Big Typhoon 120
MSI P35 NEO2-FIR (bios v1.8)
ADATA 2*2GB DDR2 800+ EE
ASUS Geforce 8800GT 512MB + Accelero S1
Seasonic S12-600
Originally Posted by Moonraker™
good job man....can you post the rest of your BIOS settings?
Funny thing is - I just checked my E6400 with the Asus AI Suite, and it shows my CPU voltage in the 1.5 range. in the BIOS its set to AUTO.Originally Posted by heikis
I didn't install AI Suite until after I hit the 400FSB mark, and CPUZ shows the voltage at 1.213 now. So somewhere along the lines, the board is raising the voltage all on its own.
I have no other items (ie: MCH) overvolted. Memory is running at 2.1 volts.
It's all the usual. Vanderpool / C1E etc. Disabled.Originally Posted by ssabripo
But I have PCI-E running at 105 and all extra perhipials disabled. i.e. Wireless card (which I have unscrewed and taken off), firewire and floppy. <- gives a slightly faster boot too.
Memory timings are a bit slacker than the ones stated on first page though, although I think these GeIL's would do lower with ease.
It was a long road and one that is now over. Behold the updatedrig:
NEC MultiSync LCD20WGX2 20.1" Widescreen // Antec P182 GunMetal // OCZ StealthXstream 700w // Gigabyte EP45-UD3P //
Q9550 @ 3.44Ghz // Tuniq Tower 120 // Gainward GTX260 (896MB) @ 580/900 // 8GB OCZ PC2-8500C5 (OCZ2P10664GK) //
60GB OCZ Vertex 2 // 600GB WD VelociRaptor (WD6000HLHX)// 1TB Samsung Spinpoint F1 (HD103UJ) // RED Saitek Eclipse //
3x Sanyo-Denki 102.5cfm 120x38mm fan // 1x Delta 80cfm 80mm fan in modified 5.25" bay "Flipped" Sunbeam Rheobus //
1x Antec Tricool 120mm fan // 1x RED Akasa System Exhaust fan // RED Sunbeam Meteor lights // RED Razer Diamondback //
not recommended to keep vcore @ auto. your cpu is getting over 1,5V for sure.Originally Posted by Khaotic
Intel C2D E8400 @ 4000MHz ~1,192V
Thermaltake Big Typhoon 120
MSI P35 NEO2-FIR (bios v1.8)
ADATA 2*2GB DDR2 800+ EE
ASUS Geforce 8800GT 512MB + Accelero S1
Seasonic S12-600
Nice post,i mean post of the year OBR....get a doctor....you really need it.Originally Posted by OBR
Intel C2D 8400
Asus P5K/e wifi
GSkill 8000PQ 4GB
Corsair 620
ATI HD4850
WD 250 & 160 Hitachi SataII
AUTO means mobo will try to raise volts automatically to support your overclock and it seems to use a little more than necessary. CPUZ misreports voltage and should be ignored for that reading.
All crunching 24/7, both cores 100% loaded
e6600es @ 3.8 (423) / p5W64WSPro / Noctua120 / Gskill 6400 / NV 7950 / 3 x Rptr150 Raid 0 / OCZ GmStr 700 / X-Fi
e6700 @ 3.6 (400) / p5b Dlx / Big Typhoon / Corsair 6400 / PCP&C Silencer 750
e6300 @ 3.465 (495) / p5B Dlx / Scythe Infinity / GSkill 8500 / Mushkin 550 PSU
e6400 @ 3.2 (400) / p5b Dlx / ThermalRight SI-128 / GSkill 6400hz / SunBeamTech 550 PSU
e6300 @ 3.08 (440) / gb S3 / Intel Stock Cooler / Gskill 6400hz
Like all the xtreme HELP you find at XtremeSystems?
Please HELP Xtreme Systems HELP fight Aids and Cancer on the World Community Grid!
Join the XtremeSystems WCG Team
what should be the value of PCI latency timer? is 64 ok or should it be for example 128?
Intel C2D E8400 @ 4000MHz ~1,192V
Thermaltake Big Typhoon 120
MSI P35 NEO2-FIR (bios v1.8)
ADATA 2*2GB DDR2 800+ EE
ASUS Geforce 8800GT 512MB + Accelero S1
Seasonic S12-600
Guys....I DID IT!!!
after 2 bad/burned boards, PSU issues, yada yada yada, I finally was able to achieve this!! e6300 conroe over air:
I'm at 50C under no load, so I'm not liking that, so I think for everyday 24/7 use, I will drop down to just 3.0ghz, and drop the Vcore from 1.4875 to 1.475.
thanks to everyone for all their guidance and help!!! you guys rock!
Originally Posted by ssabripo
good job man!
750W Thermaltake Modular PSU
DFI UT X58-T3eH8
Core i7 920 @ 20 X 200 1.325V
CORSAIR XMS3 DHX 4GB (2 x 2GB) DDR3 1600
768 MB EVGA 8800GTX
1 X 36GB WD Raptor
2 X 150GB WD RAPTORS
1 X SpinPoint P Series SP2504C 250GB
1 X Maxtor 6L300S0 300GB
16 X NEC DVD Burner
7 120mm Yate Loon LED Intake Fan
4 120MM Yate Loon Exhaust Fan
28" HANNSPREE Monitor
Watercooling Loop:
1 X PA120.3
1 X PA120.2
2 X Laing DDC's w/EK-DDC Dual Turbo Top
7 X Yate Loon Blue LED Intake Fans
4 X Yate Loon Blue LED Exhaust Fans
1 X Swiftech GTZ
1 X GPU EK Fullcover Waterblock
1 X XSPC Dual Bay Reservoir 5.25" with Bubble Window
3x FX8150, 1250w Enermax, Fractal Desing , HD6870, Asus Crossahair V and some ln2 stuff
http://hwbot.org/submission/935260_s...be_10sec_300ms <- Lets try agen.
Here is what I'm getting in PCMark05 (one of my favourite benchies )without seeing this guide, only came across it just now.
How can I go higher with 9x multi on my E6600 B2 stepping with only 1.65v avaliable on the MCH in bios v706 beta ? or is this the limit ? I only have 1.3v for FSB and 1.60 for Southbridge. I only wanna use air cooling for system so don't want too much voltage.
http://service.futuremark.com/compare?pcm05=491207
Signature? are you kidding? with new stuff coming out every day, why bother ?
@ IluvIntel
You're using 1.65v to CPU to get that?
I seem to halt on 400FSBx9 can't go no higher. That's on 1.45v, I put it to 1.5v and still no. So maybe it needs a huge jump?
I'm currently running 430*8 on 1.46v 1:1 ratio mem @ 4-4-4-12 on 2.1v w/tuniq tower. That's for daily use (ÜBER stable in BF2) w/ 7900GT @ 580mhz core and 895 mem clocks.
I think I may have to go to 1.55v to bench hard to try to get 3.7ghz stable.
It was a long road and one that is now over. Behold the updatedrig:
NEC MultiSync LCD20WGX2 20.1" Widescreen // Antec P182 GunMetal // OCZ StealthXstream 700w // Gigabyte EP45-UD3P //
Q9550 @ 3.44Ghz // Tuniq Tower 120 // Gainward GTX260 (896MB) @ 580/900 // 8GB OCZ PC2-8500C5 (OCZ2P10664GK) //
60GB OCZ Vertex 2 // 600GB WD VelociRaptor (WD6000HLHX)// 1TB Samsung Spinpoint F1 (HD103UJ) // RED Saitek Eclipse //
3x Sanyo-Denki 102.5cfm 120x38mm fan // 1x Delta 80cfm 80mm fan in modified 5.25" bay "Flipped" Sunbeam Rheobus //
1x Antec Tricool 120mm fan // 1x RED Akasa System Exhaust fan // RED Sunbeam Meteor lights // RED Razer Diamondback //
Bookmarks