GigaByte P965-DS3 with GSKILL memory setting and discussion!!!!

[GSKILL TECH]

F2-6400CL5D-2GBNQ ---DDR2 800 5-5-5-15 1.9V
BIOS SETTING
http://www.gskillusa.com/motherboard...3_2gbnq_00.jpg

3Dmark05 PASSED
3Dmark01 PASSED
DUAL SUPER PI 32M
SP2004 STABLE PASSED
MEMTEST PASSED


F2-6400CL4D-2GBPK ---DDR2 800 4-4-4-12 1.9V
BIOS SETTING
http://www.gskillusa.com/motherboard...3_2gbpk_00.jpg

3Dmark05 PASSED
3Dmark01 PASSED
DUAL SUPER PI 32M
SP2004 STABLE PASSED
MEMTEST PASSED


F2-6400PHU2-2GBNR ---DDR2 800 5-5-5-15 1.8V
BIOS SETTING
http://www.gskillusa.com/motherboard...3_2gbnr_00.jpg

3Dmark05 PASSED
3Dmark01 PASSED
DUAL SUPER PI 32M
SP2004 STABLE PASSED
MEMTEST PASSED


F2-6400PHU2-2GBHZ ---DDR2 800 4-4-4-12 2V
BIOS SETTING
http://www.gskillusa.com/motherboard...3_2gbhz_00.jpg

3Dmark05 PASSED
3Dmark01 PASSED
DUAL SUPER PI 32M
SP2004 STABLE PASSED
MEMTEST PASSED


F2-6400PHU2-2GBHZ ---DDR2 1000 4-4-4-12 2.3V
BIOS SETTING
http://www.gskillusa.com/motherboard...2gbhzoc_00.jpg

3Dmark05 PASSED
3Dmark01 PASSED
DUAL SUPER PI 32M
SP2004 STABLE PASSED
MEMTEST PASSED




note1: looks like Micron D9 & DS3 have some problem with each other. can't run memtest even 1%. but everything passed and i believe it is 24/7 stable

note2: CPUZ displace CL3 but it is actually CL4

[GSKILL TECH]

bump for a lot of ppl doesn't see it

[Lestat]

yes bump this is key

hey GS Tech

please update your boards to the F5g bios for the DS3
i am able to run 1000 5-5-5-15 2.2v wher ei never was before.
nothing i did before allowed it to work
heck 95% of the time the board wouldnt even boot.
this is using the 2.50 divider also.

good work and thanks for the testing.

i imagine gigabyte has the chipset locked in on too tight of timings there for the tighter timings or the increased mhz of the bus/ram wont allow it to go very high.
try the F5g bios and see what happens.

[mik77]

hello,
i've a problem whit my gskill hz. s/n 63209.....

memtest 1.65 (dos) fail even at ddr 533 4-4-4-12 whit 2 v
error also at defaul ddr 800 4-4-4-12 up to 2.2 v

the system seems stable but i would like to know if it is a program error or a bad kit of ram.

my system
core 2 due 6600
ds3 gigabyte
2giga gskill hz s/n 63209.....
psu antec phantom 500
sound card wavio pci90
tv card hauppauge 1100hvr
2 hd sata samsung 250gb
1 dvd rom ld

[GSKILL TECH]

hello,
i've a problem whit my gskill hz. s/n 63209.....

memtest 1.65 (dos) fail even at ddr 533 4-4-4-12 whit 2 v
error also at defaul ddr 800 4-4-4-12 up to 2.2 v

the system seems stable but i would like to know if it is a program error or a bad kit of ram.

my system
core 2 due 6600
ds3 gigabyte
2giga gskill hz s/n 63209.....
psu antec phantom 500
sound card wavio pci90
tv card hauppauge 1100hvr
2 hd sata samsung 250gb
1 dvd rom ld

forget about the memtest86+
also DS3 + F2-6400PHU2-2GBHZ cant do windows memtest either
but system is stable. otherwise orthos and dual 32m will fail me