#1

[mike047]

Alright GUYS;

I'm #1, how about some of you BIG boys coming up and giving me a SPANKING[If you can ]

[Haltech]

How many machines do you have on this project?

[[cTx]Philosophy]

How many machines do you have on this project?

Was gonna ask same thing, 60k a day is schweetness..

[itznfb]

i certainly don't have the firepower to pass you up. you joined 2 days before me and have almost 100,000 points more.

[[cTx]Philosophy]

if theres some kinda trick to all this?
I wanna be a big dawg when I grow up too :P
More points is always a good thing is it not?

[heydo6]

nice job

[Movieman]

Lets say that Mike's house is like serlv's...only times 3..
I wonder what he has for an electrical service..Got to be a min of 200amp and even with that you'd have to lay the circuits out VERY carefully..

Now Mike, I say this as a friend..There are 2 guys here who have the power to take you on..One is in Hong Kong..Just a nice guy that is just getting into DC stuff and a n00b at PC's..I think his name is Victor..
We're teaching him how to right click and copy/paste now. He's a little slow but we are patient.
The other is a guy from Israel named Windforce..also a n00b..I think he's just learning how to do formats. We have hope for him though..said something about wanting to be a software engineer when he grows up!
I'm sure you'll get to see both of them soon..

( Now if this post doesn't have at least a few of you guys falling out of your chairs laughing then I give up)
( Victor and Jaime..I hope your laughing cause that was the intent of this)

[itznfb]

is DDTung going to be joining us?

[[cTx]Philosophy]

I didnt know mike has a hugeness farm like some of the others, Man there bill must be sickness, when all 3 of my dualies are running 24/7 our bill goes sick thru the roof, I cant even begin to imagine what some of the guys here bills are like, Im just getting started in this whole bit of folding and such, but im sure if I had #1 spot in something id pretty much do alot to try and keep it like some of the guys here..

[mike047]

I have 25 boxes with 4 of them dual cores on the project, adding one more tomorrow.

Have 12 more I will add to the project by the end of the year, plus some of these will be upgraded to dual core.

All AMD

Electric bill is in the mid $300's.

Here is a reasonable list of my tools from another site;

http://forums.extremeoverclocking.co...98&postcount=1

I'm ready to CRUNCH

I would be very happy for Victor or Jaime to give me a spanking

[Movieman]

I have 25 boxes with 4 of them dual cores on the project, adding one more tomorrow.

Have 12 more I will add to the project by the end of the year, plus some of these will be upgraded to dual core.

All AMD

Electric bill is in the mid $300's.

Here is a reasonable list of my tools from another site;

http://forums.extremeoverclocking.co...98&postcount=1

I'm ready to CRUNCH

I would be very happy for Victor or Jaime to give me a spanking

Yes, if someone is going to be spanking me in a project, it wouldn't bother me if it was either of those two..both great guys..
You kw/h cost is app 1/3 of mine... .145 cents per kw/h up here in NH

[mike047]

It's only $.08. Probably $50.00 of my bill is for floor/window fans, no AC here

I only used 10 Gal, YES 10 gal heating oil last year

[Movieman]

It's only $.08. Probably $50.00 of my bill is for floor/window fans, no AC here

I only used 10 Gal, YES 10 gal heating oil last year

Just got 111 gals of heating oil delivered yesterday..$265.00..
and thats maybe 5 times a year..then a $350.00 month elec..

[DAK1640]

I just max out my Comp's in the winter to stay warm here in Chicago...lol

[Absolute_0]

I just added my Conroe, it's already acting as my heater for the room.

In the winter we have a heating system that kicks in overnight, that's about all you need because it's still 50-60F in the day.

[itznfb]

haven't seen you in a while Absolute_0, glad you're joining us

[WindForce]

Lets say that Mike's house is like serlv's...only times 3..
I wonder what he has for an electrical service..Got to be a min of 200amp and even with that you'd have to lay the circuits out VERY carefully..

Now Mike, I say this as a friend..There are 2 guys here who have the power to take you on..One is in Hong Kong..Just a nice guy that is just getting into DC stuff and a n00b at PC's..I think his name is Victor..
We're teaching him how to right click and copy/paste now. He's a little slow but we are patient.
The other is a guy from Israel named Windforce..also a n00b..I think he's just learning how to do formats. We have hope for him though..said something about wanting to be a software engineer when he grows up!
I'm sure you'll get to see both of them soon..

( Now if this post doesn't have at least a few of you guys falling out of your chairs laughing then I give up)
( Victor and Jaime..I hope your laughing cause that was the intent of this)

Been busy lately to the point i didn't even have the time to move my rigs to WCG, but it's coming

[WindForce]

I didnt know mike has a hugeness farm like some of the others, Man there bill must be sickness, when all 3 of my dualies are running 24/7 our bill goes sick thru the roof, I cant even begin to imagine what some of the guys here bills are like, Im just getting started in this whole bit of folding and such, but im sure if I had #1 spot in something id pretty much do alot to try and keep it like some of the guys here..

You don't wanna know my elec. bill, believe me, even if it's quite cheap here in Israel...I don't even wanna know it myself

[Movieman]

Been busy lately to the point i didn't even have the time to move my rigs to WCG, but it's coming

Have you been practicing formatting yet? You have to practice if your going to get good at this!

[mike047]

Been busy lately to the point i didn't even have the time to move my rigs to WCG, but it's coming

Your help and presence will be appreciated

[Movieman]

Your help and presence will be appreciated

Mike: You've been carrying the ball for the start of this and we all appreciate that!
It's great to see one of the newer guys get so into this!
You wait a week or two, XS will be a monster in WCG..
Quite bluntly, this is exactly what we all need..
AND I promise to never visit their forum!

[[XC] Adywebb]

Its good to see you all at WCG MM, theres no doubt you will make a big splash over there

Even I've got caught up with the thrill of the chase and signed a rig over to you - Adywebb@XS

[Movieman]

Its good to see you all at WCG MM, theres no doubt you will make a big splash over there

Even I've got caught up with the thrill of the chase and signed a rig over to you - Adywebb@XS

I appreciate that..it will be on a good team!
We may not be the best politicians but there is one thing these guys do better than anyone and thats chase down a goal!

[WindForce]

Your help and presence will be appreciated

Thanks...I am currently installing two very big applications we have been developing for the last 3 monthes, and this will go on with some more debugging until Sep. 15 I barely have time to move 4-5 rigs a day...Yesterday evening i ordered stuff for a new WaterCooled rig for over 2 hours, and at 2 am i was dead so didn't go on with it. The only consolation i find is i still have over 30 rigs to throw into the fire

[WindForce]

Have you been practicing formatting yet? You have to practice if your going to get good at this!

I stopped formatting the rigs, it prevents them from crunching