Any way to get rid of the CPU fan error when booting up? It forces me to press F1 to continue booting up. I don't have a fan on the CP header as I'm running WC'ing.
If there is a setting in the bios does anyone know what it is? I' running 804 bios.
Any way to get rid of the CPU fan error when booting up? It forces me to press F1 to continue booting up. I don't have a fan on the CP header as I'm running WC'ing.
If there is a setting in the bios does anyone know what it is? I' running 804 bios.
ASUS P5B-Deluxe
C2D E6600 @ 3.525g
G.Skill 2x1gb PC6400 HZ's
2x Seagate 400gb SATAII HDD's
PNY 7900GS @ 450/1320mhz
Lite-On SATA and IDE DVD-RW
OCZ GameXTreme 600w PSU
D-Tek FuZion "bowed"
LAING D5
Thermochill PA120.2
2x Scythe SFF-21F's
Leave the computer off for a few minutes with the PSU off and unplugged. After about 5 minutes plug the PSU cord back in and turn the PSU on.Originally Posted by KingGuru
Now the important part...... hold the Insert key before you press the start- up button and keep it held down even after you press the start button.... It may not work the first time, but it will work the second
ASUS P5B-Deluxe
C2D E6600 @ 3.525g
G.Skill 2x1gb PC6400 HZ's
2x Seagate 400gb SATAII HDD's
PNY 7900GS @ 450/1320mhz
Lite-On SATA and IDE DVD-RW
OCZ GameXTreme 600w PSU
D-Tek FuZion "bowed"
LAING D5
Thermochill PA120.2
2x Scythe SFF-21F's
if your water cooled in the cpu section of the bios you check ignored box on the cpu fan speed.Originally Posted by cdelong
If your after market cooler has a slower 120mm fan I believe you can change the fan speed minumum
P5WD2 Premium D920@4178
http://valid.x86-secret.com/show_oc.php?id=99504
P5B dlx wifi E6600@4015
http://valid.x86-secret.com/show_oc?id=147230
P5K DLX Wifi Q6600 24/7 folder 3.6 ghz 1.42 volts
http://i201.photobucket.com/albums/a...7_15-00-11.png
http://valid.x86-secret.com/show_oc.php?id=286608
Ok guys. What is the best memory for the P5B-Deluxe ??
Not too expensive and least number of compatibility problems ??
Thanks!
Originally Posted by FullMoon
haven't really heard of any that didn't work good, anything with micron d9xxx should be fine.
It's watercooled- thanks.... I'll check that settings out next time I restartOriginally Posted by kwalker
ASUS P5B-Deluxe
C2D E6600 @ 3.525g
G.Skill 2x1gb PC6400 HZ's
2x Seagate 400gb SATAII HDD's
PNY 7900GS @ 450/1320mhz
Lite-On SATA and IDE DVD-RW
OCZ GameXTreme 600w PSU
D-Tek FuZion "bowed"
LAING D5
Thermochill PA120.2
2x Scythe SFF-21F's
OK.... didn't find anything in the bios and the fan alarm still comes on when I cold boot- not on a restart though.
TIA
ASUS P5B-Deluxe
C2D E6600 @ 3.525g
G.Skill 2x1gb PC6400 HZ's
2x Seagate 400gb SATAII HDD's
PNY 7900GS @ 450/1320mhz
Lite-On SATA and IDE DVD-RW
OCZ GameXTreme 600w PSU
D-Tek FuZion "bowed"
LAING D5
Thermochill PA120.2
2x Scythe SFF-21F's
sorryOriginally Posted by cdelong
had a brain fart.
in the power tab of the bios section under hardware monitor youll find your cure
P5WD2 Premium D920@4178
http://valid.x86-secret.com/show_oc.php?id=99504
P5B dlx wifi E6600@4015
http://valid.x86-secret.com/show_oc?id=147230
P5K DLX Wifi Q6600 24/7 folder 3.6 ghz 1.42 volts
http://i201.photobucket.com/albums/a...7_15-00-11.png
http://valid.x86-secret.com/show_oc.php?id=286608
Hi .. I'd like to know if p5b del sets 1t or 2t ram timings by defaults. Is there any bios setting to get 1T?
Thank's
PcHomeAli: LcPower 6560T V2.0 | Case: TT Swing Black | Mobo: Asus P5B-Deluxe | CPU: E6600@3Ghz 1.28v + Xp90c | GPU: EVGA 8800GTS OClock Ed.@750/1200 | Memory: Team Extreme Pc6400CL4MD9@1100Mhz 2x1Gb | HD: Maxtor 80Gb Pata Barracuda 80Gb SATA | Optical: DVD Pioneer 110D | Fan: 2 12x12 + 1 80x80 Notebook: Dell Inspiron 6400 T7200 (Meron) + 2Gb 667Mhz + Hd 80Gb 7200rpm + X1400 + TrueLife 15.4' LCD
I have this board, and I get THIS message at start up, and it hangs there untill you press a key or wait about 5 sec or so. Anyone have any ideas on how to get rid of that?
i dont think you can,it seems to be the jmicron controller reporting what dvd it has detected.
does it work ok in windows?
intel G860
asus p8z77-m pro skt1155 bios 1205
Samsung 2x4b ddr3 1333@1600 8.10.9 1.53v
MSI gtx560ti twin frozr 1gb
1x120gb pny prevail elite/1x WD RE4 2TB
Lg Slimline Dvd/rw sata
Dell 2405FPW 24"
Fractal Arc mii
Xonar DX/Dell soundbar
Hiper 580watt
3.9ghz e6300-http://valid.x86-secret.com/show_oc?id=139796
http://www.techpowerup.com/gallery/1834.html
Why does this board double beep/start from a cold boot. (is this just a phase cooled thing?) I have a sense that it isn't providing enough default vdimm to boot reliably if your ram is conditioned to use higher voltage for a long period of time.
{2012 27imac-3.4i7-680mx-32gb ram-768SSD+External TB Samsung840pro ssd + TB velociraptors-Moto828mkIII/Marantz/Amphion Sound-HPzR30w 2nd monitor}
Just curious.Originally Posted by xgman
open up the mainboard tab of cpuz and see if it reports 1X pci ex width
P5WD2 Premium D920@4178
http://valid.x86-secret.com/show_oc.php?id=99504
P5B dlx wifi E6600@4015
http://valid.x86-secret.com/show_oc?id=147230
P5K DLX Wifi Q6600 24/7 folder 3.6 ghz 1.42 volts
http://i201.photobucket.com/albums/a...7_15-00-11.png
http://valid.x86-secret.com/show_oc.php?id=286608
Originally Posted by kwalker
edit; no it says link width x16 (pcei clock is set at 110)
Last edited by xgman; 12-25-2006 at 11:06 AM.
{2012 27imac-3.4i7-680mx-32gb ram-768SSD+External TB Samsung840pro ssd + TB velociraptors-Moto828mkIII/Marantz/Amphion Sound-HPzR30w 2nd monitor}
new asus utilities for Vista are posted today in the downloads
{2012 27imac-3.4i7-680mx-32gb ram-768SSD+External TB Samsung840pro ssd + TB velociraptors-Moto828mkIII/Marantz/Amphion Sound-HPzR30w 2nd monitor}
StrangeOriginally Posted by xgman
I take it that it’s not a post error beep but an initialization rest.
Perhaps it is your cooling
P5WD2 Premium D920@4178
http://valid.x86-secret.com/show_oc.php?id=99504
P5B dlx wifi E6600@4015
http://valid.x86-secret.com/show_oc?id=147230
P5K DLX Wifi Q6600 24/7 folder 3.6 ghz 1.42 volts
http://i201.photobucket.com/albums/a...7_15-00-11.png
http://valid.x86-secret.com/show_oc.php?id=286608
changing strap on nb causes double boot. normal for this board.
I havent experienced that problem.
maybe my boards not normal
P5WD2 Premium D920@4178
http://valid.x86-secret.com/show_oc.php?id=99504
P5B dlx wifi E6600@4015
http://valid.x86-secret.com/show_oc?id=147230
P5K DLX Wifi Q6600 24/7 folder 3.6 ghz 1.42 volts
http://i201.photobucket.com/albums/a...7_15-00-11.png
http://valid.x86-secret.com/show_oc.php?id=286608
Just sold my P5B-DLX, and am in the market for a new board. Does the Giga-DS3 aslo suffer from this strap crap? or the eVGA 680i? which would be the better choice?
O.K and can you tell me with which setting in BIOS I make 1T ? thxOriginally Posted by vintage_guitar
C2D E6600
p5b Deluxe
Geil 2GB 800 Ultra
MSI 8800 GTX
It's impossible...Originally Posted by jirii
PcHomeAli: LcPower 6560T V2.0 | Case: TT Swing Black | Mobo: Asus P5B-Deluxe | CPU: E6600@3Ghz 1.28v + Xp90c | GPU: EVGA 8800GTS OClock Ed.@750/1200 | Memory: Team Extreme Pc6400CL4MD9@1100Mhz 2x1Gb | HD: Maxtor 80Gb Pata Barracuda 80Gb SATA | Optical: DVD Pioneer 110D | Fan: 2 12x12 + 1 80x80 Notebook: Dell Inspiron 6400 T7200 (Meron) + 2Gb 667Mhz + Hd 80Gb 7200rpm + X1400 + TrueLife 15.4' LCD
Hey guys. this is my first post here. I switched from a p5dh to a p5b and this baord is much better. running ocz flex Xlc ram (there new liquid cooled stuff)...Fsb 530...Mem 1.1 x6800 at 3.7 and all is good. Running 2 raptors in raid0 And all is good. Just wish i could get little more fsb so i can run mem at its rated speed of 1150 but 530 fsb is damn good i guess.
Is there a fix for the slow bios when having a 8800 vga? It's really annoying...
Project ZEUS II
Asus Rampage II Extreme
Intel I7 920 D0 3930A @ 4.50GHz (21 X 214mhz)
3 x 2GB G.Skill Trident 1600 @ 1716MHz (6-8-6-20-1N)
2 x Asus HD 6870 CrossFire @ 1000/1100MHz
OCZ Vertex 2 60GB | Intel X25-M 120GB | WD Velociraptor 150GB | Seagate FreeAgent XTreme 1.5TB esata
Asus Xonar DX | Logitech Z-5500 | LG W2600HP 26" S-IPS LCD
Watercooling setup:
1st loop -> Radiator: 2 x ThermoChill PA120.3 | Pump: Laing DDC-3.25 with Alphacool HF 38 top | CPU: Swiftech Apogee XT | Chipset: Swiftech MCW-NBMAX | Tubing: Masterkleer 1/2" UV
2nd loop -> Radiator: ThermoChill PA120.3 | Pump: Laing DDC-3.2 with Alphacool HF 38 top | GPU: 2 x EK FC-6870 | Tubing: Masterkleer 1/2" UV
Assembled in Mountain Mods Ascension Trinity
Powered by Corsair Professional Series Gold AX1200
You know, I think this might work. Thx for the tip~Originally Posted by HaLDoL
You wouldn't happen to know why this happens would you...
______________________________
Are you agitating my dots?
Bookmarks