Just did one of these boards for another customer:
Just did one of these boards for another customer:
Last edited by T07N; 09-26-2006 at 08:19 PM.
E6600 @ 3.2ghz (400x8), P5B Deluxe, 2GB Ballistix DDR2-1000 @ 600mhz 5-5-5-15, X1950 Pro, Antec Neo HE 500w
Is there a Vcore mesure point?
PC : Asrock Z68 Extreme3 Gen3 + Intel Core i5 i2500k + 2 x Asus HD6870 DirectCU + 2x2GB PC12800 G.Skill Eco 7-8-7-24 + Creative X-Fi Titanium PCIe + Scythe Mugen 3.
Digicam : Pentax *istDL2 + Pentax smc DA 18-55mm F3.5-5.6 AL + Cosina F3.5/100mm Makro.
Heimkino : Samsung LE-46B450 FullHD + Arion AF-4000HDCI + Onkyo TX-SR505E + Quadral Quintas 5.0 + Heco Victa 25A.
can someone tell me what resistance they have after ajusting vdoop, please, i need it just to do it once since my board is in the case and i dont have space in my room to set it up outside it and test the resistance and vdroop i get
thanks
Anyone? I really need it!Originally Posted by funkflix
PC : Asrock Z68 Extreme3 Gen3 + Intel Core i5 i2500k + 2 x Asus HD6870 DirectCU + 2x2GB PC12800 G.Skill Eco 7-8-7-24 + Creative X-Fi Titanium PCIe + Scythe Mugen 3.
Digicam : Pentax *istDL2 + Pentax smc DA 18-55mm F3.5-5.6 AL + Cosina F3.5/100mm Makro.
Heimkino : Samsung LE-46B450 FullHD + Arion AF-4000HDCI + Onkyo TX-SR505E + Quadral Quintas 5.0 + Heco Victa 25A.
Lol try any one of the coils around the cpu.Originally Posted by funkflix
My question, does anyone know if the Vdroop mod will allow higher fsb on FSB limited chips?
Man nice pics, thanks for the info.
Asus P6X58D Premium/ i7 920@3.8Ghz (3.8ghz 24/7)/3X2 Gigs Corsair Dominator 1600Mhz 8-8-8-24/Intel X25M-80gb SSD/Asus 5650/ OCZ Powerstream PSU/Thermalright Ultra Extreme 120/Samsung 40" LED TV/monitor/Windows 7 64bit
what kind of cables do you use? i tryed a 1 wire cable made of cupper and it was a pain to solder.
Can i use multi wire cables? i got some that are easier to manipulate
ebay or mouser.com... are you no1b4me from the DSS scene? Or is no1b4me a popular name from some type of show or something.
E6600 @ 3.2ghz (400x8), P5B Deluxe, 2GB Ballistix DDR2-1000 @ 600mhz 5-5-5-15, X1950 Pro, Antec Neo HE 500w
Originally Posted by T07N
That is where i got the name from...
Asus P6X58D Premium/ i7 920@3.8Ghz (3.8ghz 24/7)/3X2 Gigs Corsair Dominator 1600Mhz 8-8-8-24/Intel X25M-80gb SSD/Asus 5650/ OCZ Powerstream PSU/Thermalright Ultra Extreme 120/Samsung 40" LED TV/monitor/Windows 7 64bit
Does the p5wd2 premium vdroop mod works on the p5b dlx ones ?
My System
» ASUS P6T Deluxe V2 (CF w/0006 bios) | Core i7 930 3002A879 @ 4.20GHz (21x200) | Corsair Dominator DDR3 6GB TR3X6G1600C8D @ 1603MHz 8-8-8-21-1N
» ASUS ENGTX460 TOP 1GB @ 900/4000MHz | SB X-Fi Titanium PCI-E | C:\Intel SSD X25-M G2 80GB | D:\Samsung F3 HD103SJ 1TB | E:\Plextor PX-716SA
» Corsair HX620W Modular | CoolerMaster Stacker custom "All Black" | Samsung LED XL2370 23" Full HD
» WC 3/8": Apogee GTZ + BI GT Xtreme 240 + Koolance Nozzles + Station 600 + Silver KillCoil
For the VDIMM mod:
Does the pot over-ride the BIOS control, or supplement it?
Ie... if I set BIOS to...e.g 2.35V then tune the pot down to hit 2.45V, then go back into BIOS and up my VDIMM to 2.4V...what effect will the pot have on that value?
Its the kinda question i`d like to know the answer to before I try tho part of me wants to set 1.8V in BIOS and start playing
Thanks,
Kenny
You tune overvoltage over bios setting. so if you set to 2.4v in bios it raises vdimm.... Use a DMM though, as bios setting 2.45 is right but 2.3v is not... at least in my case.Originally Posted by K404
For example with my board set to 2.45 i get 2.79v, with my board set to 2.35 i get 2.6, .2v off even though i only stepped down .1v in bios. The situation is the same with the MCH.
DDaniel,Originally Posted by DDaniel
How big are those blue thingies (Kilo Ohm) ? and how many turns?
I plan to mod vcore only .... (probably all later on)
for the vcore ones most use 50k, but some use 20 and its works ok, you just start out a bit higher.
25turns.
Thank you. Just ordered some to play with ...Originally Posted by Revv23
When I finish the vdimm mod .... which is the value of the vddim that I must select in the BIOS ???
wich is the value (in ohms) that I must put on the VR ???
salu2
you need to go to hardware monitor in the bios it wont matter what you set the volts too once you vmod the mobo only the vmod can change the volts in hardware monitor you can see the vcore and adjust it with the 50k ohm if you hit over 1.87 ish the system may reboot a lot
I not understand much.
Let's suppose that I want my memories working to 2.60 volts.
Which is the voltage that I select in the BIOS?
In all the ohms has VR to be ?
I do not speak english...I used a traslator
@F.B.I:
It doesnt really matter what VDIMM you set in BIOS, but for 2.6VDIMM, set to maximum in BIOS- this means you dont have to use the variable resistor so much to get to 2.6VDIMM
Hope this helps
Kenny
The MCH mod for this board is crazy- hardest mod i`ve ever tried..the solder really doesnt want to stick to the IC pin. AT ALL.
Might just leave it alone before I break something. Wish my MCH voltage didnt undervolt so much...1.55V BIOS gets 1.48V real
WHOA! I just had another look after what you said... the FB pin (pin 6) is the one I can solder easily, and my VDIMM mod is grounded to a 3-pin fan connection so I can turn it off...i`m gonna try it that way! Thanks for the idea!Originally Posted by DEVIL K-ce
EDIT: I tried it... K-ce I owe ya one! I`ll get a pic up tomorrow when its light here. Its pretty ghetto stuff!
for what is the conection on the 3-PIN (fan) ???
Bookmarks