Originally Posted by CrazyJohn
Ty for the info m8...
i was looking at these as well
http://www.newegg.com/Product/Produc...82E16820220095
Originally Posted by CrazyJohn
Ty for the info m8...
i was looking at these as well
http://www.newegg.com/Product/Produc...82E16820220095
not bad ram zillaoc. you probably can get that to 5-5-5-15 and up some voltage =D
How is it possible that using a DVI connection vs VGA causes overclocking problems? THis doesn't make sense to me.
"Mine has somehow fixed itself after upgrading bios and installing drivers from CD... I’m not 100% sure what causes this. "
On the CD/DVD drive issue..I was having issues too, even after installing the latest firmware and software from cd. I updated from bios F2 to F4c and besides there being some windows problem which required a system restore in safe mode...the new bios in conjunction with latest firmware seemed to do the trick for playing DVDs with VLC, all three i tested work now. However...WMP seems to read there is no disc on the drive still, but this may likely be a software issue using wmp 9 installed with windows-i should update.
nzxt lexa + Corsair HX620W Modular
Asus P5KE-WIFI with e6400 XP-90c +92mm smart fan + AS5 compound.
GSKILL DDR2-1000 4GB RAM
eVGA 8800GT + Viewsonic VX2025wm
Creative X-fi music logitech G51 5.1
Seagate Barricuda 320GB 7200.10RPM HD
Still can't boot with OCZ800 RAM. Everyone seems to say that putting in some cheap ram and updating the BIOS then upping the DIMM Voltage +.2 or +.3 makes it work (which I did), but it still does the exact same thing after all that, even with one stick OCZ in. Fans start up, but I get no signal on the monitor and don't get the startup beep.
Any suggestions? Using a Seasonic 430W PSU, MSI 7600GT Card, and E6300.
Is's Ninja PLUS (Ninja+)Originally Posted by lopri
I think i did write that?:> maybe i didn't make myself clear i wrote to unplug all usbOriginally Posted by dualshock
i'll put it in faqOriginally Posted by Chris583
updated.
Last edited by CrazyJohn; 08-09-2006 at 01:24 AM.
E6300 [4oo x 7] 1.15V, DS3 F5 50mm@5V, 2x512 GoodRam PRO D9, Ninja+ 120mm auto
This MB does not like my graphic card had to cheat it with a VGA PCI 1MB...
|| nVidia 76ooGS Galaxy Zalman Edition 1.2ns - [64o/815]
|| Creative Audigy2 @ Audigy4 + T6o6o // DVD-RW Pioneer DVR-11oD // 25oGB Hitachi
|| Sharkoon SilentStorm SHA48o-9A 48oW // MX61o, ImageQuest Q91o...
GigaByte DS3 FAQ by CrazyJohn
GigaByte DS3, DS4, DQ6 MEMORY thread by CrazyJohn
Question: Will this board work with an E-IDE DVD-RW drive, namely the Sony DRU-820?
/!\ Gigabyte 965P-DS3 is not Accept 512mb Corsair 5400 UL rev 1.3 /!\
wow very surprised this is the first time i've seen corsair having problem with the DS3 board since most corsair are at the low 1.9-2.0V
i;m using IDE Pioneer DVD-RW and is working very goodOriginally Posted by MQuartermass
E6300 [4oo x 7] 1.15V, DS3 F5 50mm@5V, 2x512 GoodRam PRO D9, Ninja+ 120mm auto
This MB does not like my graphic card had to cheat it with a VGA PCI 1MB...
|| nVidia 76ooGS Galaxy Zalman Edition 1.2ns - [64o/815]
|| Creative Audigy2 @ Audigy4 + T6o6o // DVD-RW Pioneer DVR-11oD // 25oGB Hitachi
|| Sharkoon SilentStorm SHA48o-9A 48oW // MX61o, ImageQuest Q91o...
GigaByte DS3 FAQ by CrazyJohn
GigaByte DS3, DS4, DQ6 MEMORY thread by CrazyJohn
http://www.mushkin.com/doc/products/...ail.asp?id=373
anyone think those mushkin ram will have any problems with the DS3?
anyone pleayed with balistix on teh DS3?
E8400 E0 @ 4.00 GHZ, DFI P45 T2RS+, 4X2GB Mushkin 1066 996599, Radeon 4890 , Enermax Liberty 620W , 4X500GB HDD+Samsung SLC 64gb SSD.
all paired with a LG 245WP
Originally Posted by eklipze
i'm using that ram, 2x1gb (996527) and it runs superbly. prime stable @ 1080mhz 5-6-5-15 2.2vdimm
but i'm using DS4.
Intel Core i7 870,
MSI P55 GD65,
4x 2048mb DDR3 1600 Corsair Dominator,
Sapphire 5870,
Corsair HX850W,
2x 640GB WD sata II,
1x 1TB WD Sata III,
Can anyone reading this thread confirm that the DS3/DS4 works fine with Gskill LA 5400?
cheers!
Cheers, Cool_Dude.
<<< fear.teh.squirrel
irenic: i'm thinking about that ram i still can get the OCZ plat which runs SUPERB too but i just have to boot up and get the F4C Bios update.-- i'm still thinking about it -- BTW: Mhz. and timings are kinda loosened too much. don't think i'll ever need ram to run at 1000 Mhz lol
Cool_dude: if Gskill is about 1.9V it should do perfectly fine unless the DS3/4 doesn't like that kind of ram. pS: most people only have problems with the PC26400 DDR2800 rams cuz they're usually higher voltage.
Originally Posted by cool_dude
I forgot to mention that it works fine on DS3, im getting a DS4 so should be the same yup?
Anyone sucessful in clocking this ram here?
Cheers.
Cheers, Cool_Dude.
<<< fear.teh.squirrel
Originally Posted by cool_dude
I'm intrested in the answer to this too! Please someone enlighten us
Core 2 duo E6300...Gigabyte 965P DS4...2x1GB GeIL PC2-6400 Ultra low latency...X1800XT...Hiper 580 Type R PSU
DS4 is driving me nuts
Gigabyte DS3
i have tried Team Group DDR2 1000 5-5-5-15 and Corsair XMS2 Pro DDR 533 3-3-3-8 with no problems to boot
Mojo
Family
Biostar TP55 XE - Core i7 860(ES) @ 4.2ghz - CNPS10X Extreme - G.SKILL 1600 - Galaxy GTX275 - Velociraptor 300GB x 2 - Zippy TypeR 600w
Criminal
Biostar Tpower X58A - 920~Gulf - G.SKILL2000CL8 - GTX580 - Intel 520 120GB - Antec HCP 1200w
Biostar TP67XE/TZ77XE4 2500k~3770K - G.SKILL 2800 - GTX480 - OCZ Vertex2 50GB - Corsair AX1200
Biostar Tpower X79 i7 3820 ~ E5 2680 - G.SKILL 2400C11 - GTX560Ti - Intel 520 120GB - AX1200i
Kids
P4GD1 - Pentium M 780 - XMS Xpert400 - GTX460 - Raptor 36GB - Aopen 560w
It should... I have a E-IDE Samsung DVD-RW...and it works, mind you dvd playback didnt work at first with the mobo on the stock F2 bios, but F4C seemed to work for me and who knows the F3 might too. I'm going to test burning dvds tonight.Originally Posted by MQuartermass
Also, TeamGroup DDR2 667 3-3-3-8 2GB Kit works fine in the DS3 at boot.
nzxt lexa + Corsair HX620W Modular
Asus P5KE-WIFI with e6400 XP-90c +92mm smart fan + AS5 compound.
GSKILL DDR2-1000 4GB RAM
eVGA 8800GT + Viewsonic VX2025wm
Creative X-fi music logitech G51 5.1
Seagate Barricuda 320GB 7200.10RPM HD
Can any 1 confirm if the G.Skill 2GBHZ DDr2 800
My system failed to boot, and i have no other ddr2 to test on the system
I power it on, it runs for rnd 2 secs before powering down, it duznt seem like a ram issue to me, but just to be sure, cud sum 1 tell me if its the memory?
Very nice FAQ, should be extremely helpful for both existing and future DS3 owners.
To hold off till RD600 or jump DS3 now.....hmmmmm XD
'Gaming' AMD FX-6300 @ 4.5GHz | Asus M5A97 | 16GB DDR3 2133MHz | GTX760 2GB + Antec Kuhler620 mod | Crucial m4 64GB + WD Blue 2x1TB Str
'HTPC' AMD A8-3820 @ 3.5GHz | Biostar TA75A+ | 4GB DDR3 | Momentus XT 500GB | Radeon 7950 3GB
'Twitch' AMD 720BE @ 3.5GHz | Gigabyte GA-78LMT-S2P | 4GB DDR3 | Avermedia Game Broadcaster
Desktop Audio: Optical Out > Matrix mini DAC > Virtue Audio ONE.2 > Tannoy Reveal Monitors + Energy Encore 8 Sub
HTPC: Optoma HD131XE Projector + Yamaha RX-V463 + 3.2 Speaker Setup
Anyone have an answer to this: In POST and BIOS, my e6300 is correctly recognized at 1.86 with multiplier x7. But in CPU-Z, it says multiplier is x6 and core speed is 1.60 ... ?
EDIT: Using F4C BIOS...
@MQuartermass
it's normal. when not used the cpu slows down...
damn i won;t write the features of the cpu in the faq :P
E6300 [4oo x 7] 1.15V, DS3 F5 50mm@5V, 2x512 GoodRam PRO D9, Ninja+ 120mm auto
This MB does not like my graphic card had to cheat it with a VGA PCI 1MB...
|| nVidia 76ooGS Galaxy Zalman Edition 1.2ns - [64o/815]
|| Creative Audigy2 @ Audigy4 + T6o6o // DVD-RW Pioneer DVR-11oD // 25oGB Hitachi
|| Sharkoon SilentStorm SHA48o-9A 48oW // MX61o, ImageQuest Q91o...
GigaByte DS3 FAQ by CrazyJohn
GigaByte DS3, DS4, DQ6 MEMORY thread by CrazyJohn
So to OC this board I have to dump my logitech G15 keybaord and MX1000 mouse? How do any gamers use this board!
ARGGHHHHH!
I have a conroe in my hands wanting a mobo.......
Bookmarks