yeah I really hope they take off the 19k's here shortly.
yeah I really hope they take off the 19k's here shortly.
the orb has been spoiled by the bugged/fake scores ... a half decent way round it though is to put the g4 ti 4600 in the graphics box on the search and compare as it knocks most of the fakes out ...
To get that score he'd have to be doing some serious clocking on that card.
Don't forget that there are some ti 4200's that come out with 3.3 ns ram as well. eg SUMA make one.
It could be a fake though. As I average around the 13,300 and my ti 4600 clock's at 365/780. Maybe I need a lot more tweaking and some more horse power under the bonnet.
They will fall at his feet....... But eBay @ZZHOLE still ripped me off!
damn you've all got fast cards, my 14113 is with a card that won't do over 328/720...
fx-53@210*14@1.7V, asus x800xt-PE peltier cooled-Vapochill ls
The maddest in hardware!!
Cursed Intel. What are you cooling that card with?
I hope your not talking about that original score I postedOriginally posted by LORD
To get that score he'd have to be doing some serious clocking on that card.
Don't forget that there are some ti 4200's that come out with 3.3 ns ram as well. eg SUMA make one.
You might want to take a look at some of the systems' specs that are scoring around him in the Ti4200 class
E8600. EP45-UD3P. 500FSB 24/7. Still WinXP. Heatware
default cooling.
next one is a watercooled156wpelt cooled speedking with tweakmonster ramsinks, if that don't go up, I sell all my hardware
fx-53@210*14@1.7V, asus x800xt-PE peltier cooled-Vapochill ls
The maddest in hardware!!
Thats just what I am gonna do if I dont get in front of youOriginally posted by calantak
default cooling.
next one is a watercooled156wpelt cooled speedking with tweakmonster ramsinks, if that don't go up, I sell all my hardware
good luck,:smileysex I've ordered an abit bd7-II and a 512 mb stick of corsair pc3200, which I will team up with my 1.6a that does 2.850 on air already and my prometheia, which I will be trying out this weekend...
the mainboard that does the highest score with default grafics will be my next setup for 3dmark
fx-53@210*14@1.7V, asus x800xt-PE peltier cooled-Vapochill ls
The maddest in hardware!!
Originally posted by calantak
good luck,:smileysex I've ordered an abit bd7-II and a 512 mb stick of corsair pc3200, which I will team up with my 1.6a that does 2.850 on air already and my prometheia, which I will be trying out this weekend...
the mainboard that does the highest score with default grafics will be my next setup for 3dmark
Then I am getting a TH7II and a 2.5 with LN2 :banana::banana::banana::banana::banana::smileysex
Na, na..... OK you can be in front of me but just for now OK?:prod:
I have a th7-II and ln2 ;-)
stop the macho crap, okay
fx-53@210*14@1.7V, asus x800xt-PE peltier cooled-Vapochill ls
The maddest in hardware!!
think they might be stripping the fakes out now... ORB down and I just got my best score yet and can't upload it!
you just save that dirty bugger and connect it later.Originally posted by Marci
think they might be stripping the fakes out now... ORB down and I just got my best score yet and can't upload it!
fx-53@210*14@1.7V, asus x800xt-PE peltier cooled-Vapochill ls
The maddest in hardware!!
they have cleaned it up i was browsing earlier and all the 19k ones and the bugged/fake ones were gone (good to tell there was no world cup footie on today lol)
Those Intels seem to run pretty good on 3Dmark.....Originally posted by DexterHolland91
Cursed Intel. What are you cooling that card with?
Socket A thin fin cooler with DELTA. Thermaltake ram sinks on BGA. It's a Leadtek Ultra with A3 chip.
Last edited by LORD; 06-19-2002 at 10:50 PM.
They will fall at his feet....... But eBay @ZZHOLE still ripped me off!
Yeah that's why I'm cursing Intel, it's too easy to get high scores. Why did you even change the cooling on that card? The stock cooling with stronger fans would be better than what you put on, it sounds like.
It was a mixture of reasons why I changed it over.Originally posted by DexterHolland91
Yeah that's why I'm cursing Intel, it's too easy to get high scores. Why did you even change the cooling on that card? The stock cooling with stronger fans would be better than what you put on, it sounds like.
At the time I had issues with 3.3volt level. Went down to 2.97 at times (under load). This was with an ENERMAX 550 watt.
Since then I've found it important to make certain that the pins in the ATX socket on the motherboard make proper contact with the ATX plugs from the power supply. MY 3.3 volt level is over 3.36 volts now. As read from MBM etc. You'll find that the GF4 overclocks better with a higher 3.3 volt level.
I also found that the rear sink got mighty toasty on the Leadtek standard setup. Tried using a 50 cfm Sanyo Denki and it improved things somewhat.
I took it off to have a look and the finish of the mating surfaces positively suck (really rough). Especially where it makes contact with the GPU. It doesn't help with the dished surface of the DIE.
The socket A heatsink is rated for a 2100+. So it should cool better. I would think. Only thing is I attached the TT heatsinks with very thin frag tape, so it's not as good as thermal compound.
Have to work out a better way soon. When I can get a GPU water block I might try that with a pelt.
They will fall at his feet....... But eBay @ZZHOLE still ripped me off!
Bookmarks