Results 1 to 3 of 3

Thread: 2Rads and 2Pumps .. ?

  1. #1
    Xtreme Member
    Join Date
    Dec 2002
    Location
    B.F.E.
    Posts
    234

    Talking 2Rads and 2Pumps .. ?

    Would using a small rad (80mm) for the vid card with its own sep pump, and a larger rad for the cpu with its own pump, lower the water temps versus running both blocks off the same pump and rad?

    Thanks.

    About to setup a serious water system, and need some input here.

    Nomad
    A7V8X KT400
    2400+ AIUCB 0240 @ 2.3GHz
    PNY Ti 4400 -=14,396Marks=-
    MSI Ti 4200 8X/128DDR -=13,520Marks=-
    1x512 Geil DDR 2700 -- 2,2,2,6,1T
    True550 PSU

  2. #2
    Xtreme Addict
    Join Date
    Jun 2002
    Location
    Saskatoon, Saskatchewan
    Posts
    1,431
    Do you mean two completely seperate water cooling loops, or do you mean a single loop with two pumps and two rads?

    If would say that seperate loops for each would be better, since that way, if you decide to throw a Peltier Cooler on either the CPU or the video card, you will not affect the performance of the other block.
    AXP1700+ JIUHB 0302 @ 2400MHz - TEC-Watercooled in The Skyscraper
    ABIT NF7-S , Sapphire Radeon 9500 Pro, 1.5GB XMS3200C2

    XS IRC channel: irc.quakenet.net #xtremesystems
    www.ocfaq.com

  3. #3
    Xtreme Member
    Join Date
    Dec 2002
    Location
    B.F.E.
    Posts
    234
    I am referring to seperate loops. =)

    I am planning to have pelts on possibly both blocks...certainly the cpu.
    A7V8X KT400
    2400+ AIUCB 0240 @ 2.3GHz
    PNY Ti 4400 -=14,396Marks=-
    MSI Ti 4200 8X/128DDR -=13,520Marks=-
    1x512 Geil DDR 2700 -- 2,2,2,6,1T
    True550 PSU

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •